I had ITunes on a Dell laptop. I copied it all to a Compaq laptop via external hard drive. The Dell is deauthorized. The Compaq is authorized. My IPod Classic will not Sync on the Compaq. I have transferred purchases, but "Sync" is greyed out.
I had ITunes on a Dell laptop. I copied it all to a Compaq laptop via external hard drive. The Dell is deauthorized. The Compaq is authorized. My IPod Classic will not Sync on the Compaq. I have transferred purchases, but "Sync" is greyed out. How can I get the IPod to sync with the Compaq?
If the iTunes sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar.
The iPod should appear in the sidebar, under DEVICES. Select it there. To the right, its Summary screen is shown. Toward the top, there is a bar of buttons starting with Summary. Click on Music next to Summary. This Music screen is where you tell iTunes how to sync songs ot the iPod.
Check the box for Sync Music. This is the switch to enable automatic syncing. If your iTunes music library fits on the iPod, you can choose to sync Entire music library. Otherwise, you can choose to sync Select playlists, artists, albums, and genres. Then select what you want on the iPod from the lists below.
Click Apply to intiate automatic syncing between that iTunes library and your iPod (based on how the iPod's Music screen is set up in iTunes).
Similar Messages
-
My 5 year old iPod classic will not play on my Yamaha CRX-332 cd receiver but my 3 year old iPhone 3g will. Any suggestions to get my iPod to read the receiver or get the receiver to read the iPod? The receiver should be able to play the iPod with a USB connection or with the iPod dock. Neither works with my iPod however both work with my iPhone 3g. The iPod has the latest software. Any thoughts?
If it is a 5-year old iPod, there is the possibility that the receiver simply won't work with the older software (there hasn't been an iPod Classic software update in years). You might try contacting Yamaha support (or doing a google search) to see if it is a known issue. One solution (probably the easiest) is to get a cable that connects a min jack (i.e., a headphone jack) to stereo cables, and just connect the iPod up that way. You eliminate the risk of corrupting the iPod, and it is a solution that should always work. Just use a wall charger to power the iPod.
-
I had all of my music on an external hard drive that crashed. I have iTunes Match so all of my music was synced in the cloud. How do I now re-load my music back down onto a new external hard drive?
Hey Rbe58!
I believe this question can be answered by the information in the following article:
iTunes 11 for Windows: Access all your music anytime, anywhere with iTunes Match
http://support.apple.com/kb/ph12492
Play or download songs from iCloud
You can play songs directly from iCloud, or you can download songs so you can play them when you’re not connected to the Internet.
If a song is available in iCloud, it has a Download button next to it.
To play the song, double-click it.
To download the song, click the Download button.
After you download a song to a computer, it remains in the computer’s iTunes library, even if you turn off iTunes Match.
To only display downloaded songs in your iTunes library, choose View > Hide Music in the Cloud. This also hides any previous iTunes Store purchases you haven’t downloaded.
For information about downloading and playing songs on an iOS device, see the documentation for the device.
Thanks for using the Apple Support Communities!
Cheers,
Braden -
I had all photos on a Windows desktop. Got a mac laptop, installed LR5, and put all images from Windows onto an external hard drive. When I go to import them into LR on the mac, they are all locked. Help, please!
"I plugged the external into the Mac and moved a folder of images onto the desktop. It looks like it went from read only to not locked. Is this possible?"
Yes, that's exactly what happened. If you buy another drive, you could copy from your existing drive to the new and your files will be read/write. The new drive will have to be formatted as an HFS drive (that's the Mac's format). If you need to format it, you use Disk Utility which is in the Utilities folder on your Mac. Be careful with that -- it wipes out whatever is currently on the drive. Make sure you format the right drive.
I keep all my images on an external drive, too. In fact, I have two matching drives and sync them so I always have a backup. -
I have a Window 7 HP laptop. I want to install Snow Leopard on an external hard drive as the memory space on my laptop is very less. I have the original snow leopard disc and I think it's a retail version . Please guide me through the installation in details. Can you also please let me know about this boot camp.
You cannot. From a legal standpoint, the license agreement for OS X mandates that you run OS X only on Apple hardware. HP is not (yet) owned by Apple.
From a technical standpoint, your HP laptop doesn't use EFI, but rather an early predecessor called a BIOS. Apple is the only vendor of consumer computer hardware that uses EFI; other vendors reserve EFI for use in servers.
Secondly, Apple's operating systems support a rather limited number of configurations of video hardware and mainboard chipsets directly since they need only support those systems that they manufacture. You cannot use Windows software or drivers on OS X, so prior to installation, you would need to write your own hardware drivers for your laptop, create an OS X drive image on a Mac, and then modify that image with your drivers before putting it in the HP.
It will be simpler (and legal), to simply purchase a used Mac. Apple's online store has refurbished MacBook Airs starting at $850 and Mac Minis for $700. If you go to e-bay or craigslist, you'll find used Macs for considerably less. -
I have moved all my itunes onto a new external hard drive to free up space. It has wiped my ipod clean! I can still see the itunes on the new hard drive so I restored my iPod and tried to sync. Although when I connect my iPod it's in the process of syncing, so many songs in I get a pop up saying could not copy to my iPod as xyz song title could not be read or written. I click ok for this pop up to dissapear and then another pop up appears saying could not coyp to iPod because of unknown error.!!! Help I'm going crazy.
Did you go into iTunes to change the location of your media files? if not you will need to go into iTunes and click on preference and select the advance tab then click the iTunes Media folder location. Select the location of your on external hard drive.
-
i tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just delete all those images so i could try a different approach to transferring, but the new iphoto won't let me do anything and every time i try to delete anything it crashes (since the image amount is so high). please help!!
MacBook Pro, OS X Mountain Lion (10.8.2), iphoto '11, version 9.4.2To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else. -
i have moved all of my data to an external hard drive should i then delete the copies on my laptop
What are you actually trying to accomplish? Backing up the library, or moving it?
If backing up don't delete anything.
If moving did you move the library files as well? Ideally you would copy the entire iTunes folder out to the external drive then shift-start iTunes to connect to the relocated library. This method makes it easier to move the library to a new drive or computer later and keeps everything together for backing up. Rather than delete everything rename the iTunes or iTunes Media folder first (depending on which approach you took) and make sure the library still works before deleting.
tt2 -
I had to restore my Windows Vista and now my Ipod Classic will not sync
I had to restore my Windows Vista, before I restored I backed up my Itunes to a external hard drive after the restore I switch my I tunes back to laptop and my library was intact, however my playlist shows up as ghost images and will not play. My Ipod classic will not sync with laptop now.
See Repair security permissions for iTunes for Windows and/or Re: Why can't iTunes find the music from an external hard drive?
tt2 -
IPod Classic will not sync since installed iTunes 11
iPod Classic will not sync properly since installed new iTunes. Always stops at or around song 2 and just hangs there, even if left all night. Tried restoring the iPod, made no difference. Tried syncing just some songs, sometimes it will do 20 or so but not more than that - and I have 10,000 songs.
Saw something about problem with Winsock and reset that but no effect.
Recently been re-recording CDs in Apple Lossless with 'Convert to AAC' selected for iPod. Maybe the conversion process is causing the block? But it did not before.
I also tried moving the itunes material from the Synology NAS to the PC as I thought the processing power might be the problem. It synced once after that, now it is blocked again. Tonight I tried selecting only the original AAC files and it seems to have worked for them, my problem therefore seems to be the Apple Lossless - unless the syncing of AAC files is another one-off.
Not for the first time I wish I had not updated iTunes because it so often leads to problems of some kind. Why do they not care?
AnyUpdate: following successful sync of AAC files, I changed the setting to 'manual' for music & videos, used the View menu to restore the old sidebar, and manually added the Lossless files to the IPod. That actually seems to be working (very slowly). But it would be better if Sync worked as it should.
-
Installing Solaris 10 via external CD drive on Dell Latitude D800 Laptop
Hello all, I am trying to install Solaris 10 via external CD drive on Dell Latitude D800 Laptop. After the GRUB menu it begins to load, displaying the " . . . . . ." and hangs about 1/4 way accross the screen. When attempting the install from a DVD instead of a CD the installation hangs on the same screen even sooner. Has anyone encoutered this problem?
Hello Alex,
no, you can't use USB devices on SPARC as boot device.
The OBP (even updated ones) contains only support for the USB keyboard, but none for USB mass storage (which requires a device driver). The integrated USB ports are for slow devices like keyboard and mouse.
Using an external SCSI DVD-ROM works. Another choice is an installation via network.
Michael -
My Ipod classic will not sync a tv show episode on Itunes
My Ipod classic will not sync a tv show episode on Itunes even though I already have another episode working on my ipod classic and it says it
How is your iPod configured to sync TV Shows? What options do you have enabled from under your iPod's TV Shows configuration tab in iTunes?
No error messsages when you sync your Classic with iTunes? Try resetting all warnings with the device by right->clicking on it from under Devices in the left hand pane of iTunes and choosing Reset warnings. Then resync your device to see if any errors appears.
B-rock -
hello once again.. i have formatted my external Hard drive it using exFAT, now my windows cant detect my device, can u plzz help me the whole purpose is getting ruined, i use Windows 7 ultimate 64 bit
This is a problem with the Mac OS X implementation of exFAT. I've had the same problem.
Best is to use a Windows box to format the drive exFAT. Then it can be read by both Windows and Mac OS.
But aren't Macs supposed to "Just Work"? Not in this case. -
I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data and it does not show on the desktop when connected.
Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
You need to mount the sparsebundle then check the actual info inside the bundle.
Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
Pondini has a lot of stuff about getting access to the sparsebundle.
http://pondini.org/TM/17.html
But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself. -
I have an iMac 2013 running OSX 10.9.4. I want to use Carbon Copy Cloner to backup user files to an external hard drive to free up space on my iMack Hard drive.
So, say I make the backup today, delete iphoto libraries from my iMac, and then backup my iMac in a week. What happens to the iphoto libraries that are on the external backup drive now that I am backing up the iMac where they no longer exist?
I will have them backed up to a separate second external drive as well.
I'm just very cautious about removing them from the hard drive.
Thanks for helping and understanding my crazy caution!I'd like to store my Aperture /IMovie Libraries on an external hard drive.
That is fine and recommended.. use the fastest disk you can afford.. ie Thunderbolt>USB3>FW800>USB2.
In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.
Let me be clear.. you want to partition the one disk.. use it for TM and move your files to the external disk.. and then backup to the same disk.. You can do it.. but that is not a backup.. that is an experiment in how long you can get away with running files and backups on the same disk before you lose everything.. like Russian Roulette.. pull the trigger enough times and laws of probability will do you in.
You must have backups on a different disk .. otherwise it is pointless.
Can I set up a RAID 5 format for redundancy?
No.. you can buy special USB and Thunderbolt external drives that support RAID..
BUT that is still not a backup.. let me show why.. you make a silly move and corrupt your file in aperture.. it is not that rare.
Raid will corrupt all copies of the files.. it is replicated across all disks.
Delete a photo it is deleted across all disks.. you have no recovery.
Alway, always consider RAID system one disk.. backup onto another disk.. and if the photos or movies are at all important to you.. ie your family .. make another copy and store in a relatives house.. There is no such thing as too much redundancy.
Maybe you are looking for
-
Use a window handler in a webutil_c_api.invoke
Hi I need to get the window handler of the forms, but I always get 0 from get_window_property( 'my_win',WINDOW_HANDLE ) and wen I ran the function: webutil_c_api.invoke(ps_dll,'TWAIN_AcquireToFilename',func_param_acq); the function send me a messageb
-
SRM PO's to be printed out with the PO
Hello All, I have a requirement in my current project wherein the attachments with SRM PO's are to be printed out along with the PO. In the SAP implementation guide for this it is mentioned that `SAP delivers a standard implementation with which you
-
Airport and Apple Script - on and off script
I've had this problem for a while, trying to turn the airport card in a computer on and off using and apple script. i need it to automatically turn on or off depending on which account if logging into the computer. I did find that a solution can be f
-
CC trial with existing SC6 yearly subscription
Good morning! Just like everyone else in this forum, i'm super excited about new Creative Cloud i really want to try it out new apps, but since Adobe apps is the only way i make a living, i'd want to make sure i have stable, all-bugs-worked-out versi
-
Hi folks, I'm probably being really dumb but am having trouble doing something that is probably incredibly simple. I want to access itunes music and iphoto libraries across two accounts on the same machine, a white macbook running OS 10.5.5. I've don