I had to replace the hardrive in my computer, the old drive is in the computer and accessable, I've reinstalled FF and need to get the old bookmarks to work. The last backup file has been imported but none of the links work. How do I get them to work?

Umm... don't know what more details you would want, thats pretty clear I think.

See:
*https://support.mozilla.com/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

Similar Messages

PR has been released, but i found the plant input is error.

PR has been released, but i found the plant input is error. i want to correct the plant, and i wish the release info is saved, i.e. the manager needn't release the pr again. is it posssible?

Hi,
You can modify the PR but will the changes trigger the Release strategy depends on the configuration which is done in your system.
If the Release Indicator is assigned for triggering the RS if there are any changes in PR the RS will get triggered and if it is not assigned it will not trigger.
Please check the Release indicator configuration on weather the Indcator are set for changes.
Thanks,
Vijay

My computer was refreshed and the technician did not deactive the CS3 license first and the drive has been wiped. I have my serial number, how can I get it activated?

My computer was refreshed and the technician did not deactive the CS3 license first and the drive has been wiped. I have my serial number, how can I get it activated?

Hi pipper88,
You can reinstall CS3 and enter the serial number to activate the software.
Regards,
Rave

TS1292 My itunes card has been activated but when entering the code it is telling me it is not active

My itunes card has been activated but when I enter the code it says it isn't activated???

Hi ExtremeGamer1112,
Welcome to the Support Communities!
You are referencing the correct article to address this issue:
iTunes Store: Invalid, inactive, or illegible codes
http://support.apple.com/kb/TS1292
If you're still unable to redeem your code after verifying the characters in the code, you'll need to contact iTunes Store Support for help. You'll need to provide a digital image of the front and back of the gift card as well as the sales receipt for the purchase of the gift card.
Contacting iTunes Store Support
Go to the iTunes support page and select your iTunes country.
From the iTunes support page, choose Contact Support on the lower-left side of the page.
Follow the instructions to get iTunes Store support assistance.
Cheers,
Judy

I select my Ipad under devices in itunes, go to apps that support file sharing, select kindle but none of the kindle book files on my ipad appear under kindle documents

I want to copy books I've purchased for Nook and for Kindle from my Ipad to my laptop. In Itunes I select the Ipad under devices, select apps at the top of the screen and scroll to file sharing apps. When I select the kindle app or the nook app nothing appears under the documents window.

You can't do it via File Sharing, those two stores don't support the copying of your Kindle/Nook purchases off their apps via file sharing.
If you want your Kindle book on your laptop then you could download the Kindle app from Amazon and download the books directly in it : Kindle apps.
I don't think that Nook have a PC/Mac app

HT201272 I accidentally deleted an album from my iTunes library and now that i want to re download it is saying that it has already been purchased but i don't have it how do i get the album back?

I accidentally deleted an album from my itunes library and i want to buy it again but itunes is saying that i have already purchased it but i don't have it in my library. How do i buy the album again?

Sorry, but audiobooks cannot be downloaded more than once without charge, so if you don't have a viable backup, you may be out of luck. You can, however, contact the iTunes Store, explain the situation, and see if they can make an exception for you.
http://www.apple.com/support/itunes/contact/
Regards.

HT1212 I cannot get my daughters Ipod to go in recovery mode, it has been disabled because she forgot the passcode, I have tried their suggestions on here help

I cannot get my daughters IPOD to go into recovery mode to reset it, she has used the passcode to many time and now it is disabled

staciedv wrote:
I cannot get my daughters IPOD to go into recovery mode
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

TS1702 my 5 year old grandsond was playing on candy cash last night he has seemed to have purchased something for £27.99 how do i get it cancelled

my 5 year old grandson was playng candy cash last night he seems to have purchased some app from it for £27.99 how do i cancell it and get a refund

sorry, I completely forgot to include the links. http://www.macworld.com/article/1158936/howto_ios_purchases.html, http://www.labnol.org/software/itunes-app-store-refunds/13838/

An internal error occurred while writing imported graphics in this document. The file has been saved

An internal error occurred while writing imported graphics in this document. The file has been saved, but has lost some image data. Please report this error to Adobe Technical Support.
How do i fix this, there are no images in the document
thanks
emma

We are running FM version 7.2b144 on MS Win xp Pro (32 bit), and I did not notice this until service pack 3 was installed. I believe I have found a work around to the situation and another contributing cause. If graphic files are placed directly in an anchored frame instead of importing by reference, the file somehow becomes misplaced. If you right click the graphic and open the Object Properties dialog box, and see the phrase "no referenced file" below Main Editor: Referenced File: in the lower left hand corner, this has happened. I found if I removed all graphics files without references and imported them by reference, the source file may then be properly saved. I am also using a program called CCleaner, which removes cookies, temp files, browsing history and the like from a system. If the program settings are chosen too aggressively, and the application runs when FM has a file open, this same error will occur, even if all files are referenced properly. I don't know if SP3 has some similar application which is now running in the background and causing this.
To summarize, if you want to retain SP3, I have eliminated this error by confirming the links to referenced graphics files and avoiding using 3rd party "cleaners" while FM is open.

Time Machine Error - No Backup Volume Has Been Selected

Just got the time capsule. Successfully had it replace old Airport Extreme setting. Successfully hooked it up via Ethernet to my iMac and completed a backup. Now I have it hooked up via Ethernet to my MBP. But I can't get it to backup
The Time Capsule disk mounts and I can see the files in it from my iMac backup. I'm connected to the Airport network.
In Time Machine preferences, it asks me to choose a backup disk. I select the time capsule. I turn the switch to on. And nothing happens. With the iMac, the backup started immediately.
After a minute, I get this error message:
Time Machine Error
No backup volume has been selected.
To select a backup volume, open System Preferences and choose Time Machine.
Obviously, I have done this, but the Time Machine never turns on.
I have spent thirty minutes messing with this.
And suddenly, as I writing the post, and the error message comes up again, and I click Preferences, it switches to Preferences and suddenly, the backup starts.
Go figure.

I had the same problem, though I have a non-conventional setup. My Time Machine volume is on a linux box shared with netatalk. Looking in the system log I was receiving, "System Preferences[295]: FSMountServerVolumeSync received error: -36". It turned out that the problem was with Little Snitch. Another post I found stated that Little Snitch was interfering with Time Machine's authentication when it was mounting the TM volume. Turning off Little Snitch fixed the problem. Seemed that simply rebuilding the Little Snitch rule list fixed the problems I experienced.

How can I "reprompt" when a OBIEE request has been imported into powerpoint

Hi All,
How can I "reprompt" when a OBIEE request has been imported into powerpoint using the Oracle Bi plugin for microsfot powerpoint?
When you import a request into powerpoint it show the prompts you have defined in yout request. How can the user "reprompt" the request in powerpoint?
Best regards
H.

As Silkrooster said, should be easy enough with layer styles and blending modes. To mimic the curvature you can use a simple warp style as well. You may just need multiple duplicates of the layer for ultimate control...
Mylenium

When I tried to back up my computer, Time Machine says 'an error occurred while creating the backup folder.' When I check the side of the partition where I manually saved old files, the folders are there, but NONE of the files are.

I haven't backed up my computer in over a year. When I tried to back it up today, Time Machine says 'an error occurred while creating the backup folder.' When I check the side of the partition where I manually saved old photos and documents (including all the pictures from the year I studied abroad/traveled a bunch), the folders are there, but NONE of the files are.
Does anyone have any idea what the problem might be, or how I could fix it? I really don't want to lose all those photos

So you were doing a time machine backup to another partition on the same hard drive? Just trying to gather some information so i can provide a helpful response.

How do I save to mixdown in mono, 0 db reduction in volume, in 64 bps mp3? Sounds simple, but none of the support staff has been able to do it.

How do I save to mixdown in mono, 0 db reduction in volume, (Same volume level as in the files-no -3db reduction) in 64 bps mp3? Sounds simple, but none of the support staff has been able to do it.

Several solutions to this problem. I believe we may have discussed this over the support e-mail, but I'll share it again here so that it can help others as well.
First, as I discussed in the e-mail, Audition defaults to support Pan Law which prevents content mixed to the center of a Stereo field from being louder than the same content panned far left or right. This provides a -3dB drop to center content by default, but you can disable this completely by entering Preferences > Multitrack and setting the Default Panning Mode to Left/Right Cut (Logarithmic)
Now, when you create a new Multitrack session, there is an option to specify the Master channelization. Here, you can select Mono, Stereo, or 5.1 and this will be the default channelization mode for a basic mixdown operation regardless of your clip content, though can be overridden when exporting a session mixdown.
Next, if you just choose the menu item Multitrack > Mixdown Session to New File... it will always default to the Master channelization. This command does not write to disk, it is a preview or pre-processing step. If you wish to export your multitrack session mixdown directly to disk, in your desired channelization and file format, please use the command File > Export > Multitrack Mixdown > Entire Session... You will then have the complete set of output options, including the option to output at any channelization you like and the format you prefer.
Here, I've disabled the default 5.1 output and selected a Mono mixdown instead.
I've now changed the file format settings as well to MP3, 64K.
With most of these configuration details, you should only need to set them once and these will remain the defaults for any subsequent projects, unless modified again. The Export Multitrack Mixdown dialog will reset the Mixdown options to match the default output, and the MP3 settings may update to reflect the kBps setting nearest your session sample rate.

HT204269 I can't find MobileSync/Backup/ in the Application Support folder in Library, I'm trying to find my phone back up from a few days ago before I bought my new iPhone, but when I searched on iTunes backup it has been replaced by the back up the day

I'm trying to find my phone back up from a few days ago before I bought my new iPhone, but when I searched on iTunes backup it has been replaced by the back up the day after that. Now all my data from my old phone is lost including some really important things. Also before that iTunes wouldn't let me sync my iPhone 5s data to my new iPhone 6 Plus, saying that the data is corrupt, that's where all this trouble started. I've been trying to back-up the old phones data so I can access it, but it's been replaced when ever I plug the new phone in, and no the 'sync automatically when connected' is not ticked. Please help me find my back ups.

Your iCoud account remains in iCloud even if your device is restored. (In fact, you can't delete an iCloud account from iCloud, you can only choose to stop using it.) If the device is restored, or it may no longer be signed into your iCloud account but your account will still exist in iCloud.

Dashboard has stopped working. The application will open, but none of the widgets will function. I've deleted widgets

Dashboard has stopped working. The App will open, but none of the widgets will function. I've deleted widgets & added new ones, but they also will not work.

I get the "License has stopped working" mesages too.
We have a MacbookPro at home. There are two user-acounts on this mac, one for my wife and one for myself. This way we keep our personal stuff (e-mail, files, settings, dropbox, desktop clutter etc) separated. "Fast user switching" is enabled to easily switch to your personal account.
Now when I open Photoshop I might get the dreaded "License has stopped working" message. This will happen if Photoshop is left open in her account. So I'll have to log into her account, close Photoshop, go back into my own acount and open Photoshop again.
I should not get this message since Photoshop is not part of a particular user account, it is installed in the "Applications" folder which is accesible to all users.
What makes it even more annoying is that I get the "License has stopped working" message on trying to open Photoshop even when Photoshop is closed in in the other acount, but Illustrator is opened.
This makes no sense since we bought Photoshop and Illustrator CS3 as separate programs, not as a part of the Creative Suite.
I did not report this to Adobe yet but it wil do that now.

I had to replace the hardrive in my computer, the old drive is in the computer and accessable, I've reinstalled FF and need to get the old bookmarks to work. The last backup file has been imported but none of the links work. How do I get them to work?

Similar Messages

Maybe you are looking for