I have 2 WD external HD for back up. One is hooked up to the Time Machine and the other is used to store all my large photo files. The time machine excludes the second one. I need to back this up as well . How do I reformat it so it will ?
I just purchased 2 WD TB external hard drives. I have one formatted to be used with the time machine and it is working well. the other that i am using to store large files is excluded from the time machine. I can't click on it and add as per instructions. It won't allow me to. I need to back t his up as well. Ive backed up this one so I am able to reformat it but it doesn't recognize the drive unless it is formatted in FAT which is what WD advices it be formatted in. It should be in Mac extended journaling but I can't get it to mount in that. Help?
In addition, TM will not backup drives partitioned in FAT as the OP stated his 2nd EHD is formatted. My recommendation to the OP is to reformat the 2nd EHD to Mac OS Extended (Journaled) and then include it in his TM backups. Of course in order to do this the OP must first move the data on the FAT partitioned drive to his internal HD and then once the EHD is re-partitioned correctly he can move it back.
In addition as Pondini mentioned the 2nd EHD must be directly connected to the iMac rather than be a network drive, TM is NOT, repeat NOT a network backup solution with the single caveat of using a Time Capsule backup.
Similar Messages
-
My phone froze up after last update and I can't use it at all. I think the battery is fried as well. It gets really hot sometimes when I charge it and now it won't charge at all.
Reset, hold both home and power buttons until the iPhone begins to start, usually takes about 10 seconds of holding both buttons. If still nothing try Reset while on Wall Charger, this can take about 20 seconds of holding both buttons while on Charger. If still nothing and you decide to Restore you iPhone with iTunes on computer, you may need to use DFU Mode Restore. Here are steps: Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes. DFU Mode can be difficult to enter sometimes, just keep trying. DFU Mode is a black, blank screen with iTunes saying Recovery Mode.
-
Have new iPhone 5s and older iPad ( looking to buy new iPad ) question for both is should I hook them up to y computer and back up the computer on each devise and sink and than the next one. The second question is should I do the I pad first cause it has photos in my email that have not been downloaded and it is one of or is the first model
No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that. -
I have an external hardrive for MAC, I needed to save something from my work computer so I can pass it on to my MAC, it requiered me to re-format my external HD and now when I connected to my MAC I only have "read only rights". How do I fix it? I run my Itnues from this external and now my library is gone. Luckily I have it saved somewhere else, which is not a problem, but I won't be able to write to this HD for right now. I can't see an option to give those permission back.
cptjuanjvarona wrote:
I have an external hardrive for MAC, I needed to save something from my work computer so I can pass it on to my MAC, it requiered me to re-format my external HD and now when I connected to my MAC I only have "read only rights". How do I fix it?...
Unless what you have to transfer is enormous, skip the external HD altogether and use a USB flash drive; you can get them with capacities to 128GB. Format the flash drive as FAT32 or ExFAT as LowLuster suggests so it can be read and written to on both PC's and your Mac. -
I have a external Hard drive of 1TB. I want to transfer HD movies to it from my MAC but it can only take 4 gb at a time, now i have to format it which is the best format in this situation NTFS or exFAT, as i use windows part ion as well?? plzz help
Merry ChristmasRepartition and format the drive for a Mac:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size. -
How can I turn off imessage for just one of my contacts? Me and my husband just upgraded (both had iphone 4), I got the iphone 5s and he got he note 3. All my text to him automatically send as a imessage. Ive tried to delete his contact and then went back in and reentered it but that doesnt work.
Have your husband text the word "stop" to 48369. This should take his number out of the iMessage system.
Go into your settings under messaging and make sure the box to send as an SMS if iMessage is unavailable is checked.
Hopefully this will get your messages sending/receiving to each other. -
I just bought a Macbook Air. I also have an external harddrive for which to transfer and save all my existing music from my PC. Will I have any troubles with iTunes recognizing where my music is located if I keep it on the external harddrive and not save it on the computer's harddrive?
Just be sure to Follow the steps here to transfer your iTunes to an External Drive...
Backup iTunes to an External Drive
http://support.apple.com/kb/HT1751 -
I have just uploaded the new software and a strange app has appeared on my home screen ( a grey target, panorama thing without the man) there is no title under it and I can't seem to delete it. What is it? Do I need it? How do I delete it?
Thanks for responding so quickly!I also tried that and it still didnt' work.I tried to take pictures while using the flash.I think my only option at this point is to go to Apple........
-
I have been debited 35chf for purhase of itunes match, i dont know what it is and never passed this order
Hi homayra,
Welcome to the Apple Support Communities!
I know that it can be concerning when you see a purchase from iTunes that you do not recognize. Please use the information in the attached article for how to proceed.
How iTunes Store charges might look on credit and debit card statements - Apple Support
Get more help
If you compared your purchase history (and family members' purchase histories) to your statement and still don't recognize the charge or want to request a refund, contact Apple Support.
If you don't have an iTunes Store account (Apple ID) and see charges on your statement, contact Apple Support. You can also request a refund if the charge is shown in your purchase history.
Best regards,
Joe -
How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?
When talking about a specific image posting the image may be useful.
One can use a Layer Mask and add a white Layer underneath. -
I have three different listings for Bob Seger on my iPod (Bob Seger, Bob Seger System and Bob Seger and The Silver Bullet Band) How can I put all 3 in the same artist folder without changing artist name?
Can you just create a new "Playlist", name it Bob Seger and drag what you want into the Playlist.
File/New Playlist -
i have an ipod, ipad, and iphone. ilike to use imessage on all of them but i dont want messages to appear on the devices i am not currently using. nor do i want to have to keep a saparate account / id for each device how do i fix the settings on each so that with the same ID / login I can chech me emails, share contacts etc, be able to use i messenger on each without the whole conversation automatically beiing picked up by my other devices? some conversations just arent intended to be shared!
Turn it into the local police department with an explanation as to who you tried to contact and what they told you. That's the only safe procedure, as otherwise the owner could report the iPod as stolen, even though you tried to return it, and get you into trouble.
Regards. -
does anyone know how to view text in Appleworks, to be able to click on the font button and then be able to scroll thru all the font so that one can see it change as you scroll down the list, at present I have to do it one font style at a time and then repeat? Thanks jl
Welcome to the Apple forums
Your question really belongs in the AppleWorks community/forum.
You can turn on fonts in actual type in the AppleWorks preferences. -
I can't find preferences for the notes app. and every once in awhile some of my notes just disappear at start up, I see the name and then it refreshes and they are gone, very annoying. Can anyone tell me why it does this and how to stop it? thanks
Hi again, I am on an iMac using OSX 10.7.5, I"ve taken screenshots to show you I think my settings are correct
-
I have created an Apple ID yesterday and I could not use App store that shows a message when I try to install something that "This Apple ID has not yet been used in the iTunes Store". What should I do?
Try this support article > Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
Maybe you are looking for
-
[SOLVED]EasyStroke no longer works after upgrading Xorg....
Hi, First i would just like to take the time to say, that ArchLinux kicks butt! I just joined the forum, but have been using Arch for about a month. Thus far, i have had very few problems....until tonight I keep my system really up-to-date (almost e
-
How can I get the tablename from a ViewObject extends an Entity?
I have created an entity and it's default viewobject in the BC4J business components package,and I have built a applictionmodule containing an instance of the viewobject. Now I can use the instance's name to visit the viewobject or the entity in Jdev
-
Adding images and buttons without a frame appearing
I would like to add images to some of my pages without having them appear in a frame. I would like to place some transparent gifs on the page to use as buttons for hyperlinks. I would also like to have some photos (with transparent backgrounds that a
-
Debit billings--select statement
Hi, I am preparing one alv report related to FI module.There is one colomn called Debit billings. The explanation given for that colomn " Document types RV and DR which debit accounts 110000 , 110500 , 110900 and credit accounts 400000 to 401000 . Ca
-
How does QtCurve get colors to stay the same? Somehow doesn't w/o KDE.
Basically, the one on the left is qtcurve-qt4 + qtcurve-gtk2 and the one on the right is qtcurve-kde4 + qtcurve-gtk2. I can't figure out what QtCurve is writing to some gtkrc file in order to allow this color synching. Does anyone else use qtcurve-qt