I have a 11/2 inch line on my 1st gen iPad. Any ideas on what's wrong and how to fix? Appreciate any replies.

Have a 11/2 inch wide black,sometimes white bar on screen. Any ideas on what's wrong and how to fix? It's a first gen iPad. Would appreciate any replies. Thanks

Hi Chuckfrombc,
Based on your description, it sounds like there may be a hardware issue with your display. You may want to consider taking it in for evaluation and service; you may find the following page helpful (if you are not located in the United States, make sure to select your correct country from the dropdown):
Service Answer Center - iPad
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Regards,
- Brenden

Similar Messages

  • My 2010 MacBook Pro started running slow a few days ago and is getting worse. I have run a report with EtreCheck that I can post.  Can someone please help me figure out what's wrong and how to fix it.  Thank you.

    Problem started after I unintentionally downloaded some adware 4 days ago. After lots of aggressive ads slowed down my browser I downloaded and ran AdwareMedic which seemed to do the job and browser was back to normal.  Then, possibly a coincidence, everything on the computer started running slower.  I've backed up everything and have run a EtreCheck report.

    When you have the problem, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • I have FireFox 6.0 for Mac. Download Page is blank at all times (it used to show history of downloads as well as current download process? What's wrong and how to fix it?

    I have FireFox 6.0 on Max (OS: Lion). Before this upgrade, when I downloaded a file, the "Download" page would pop up showing the current downloading process as well as all my previous downloads. Now all I see is a blank page when I click on "Downloads".

    In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
    To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • Some of my bookmarks have ost their icon picture on the toolbar, any idea why that would happen, and how to fix it?

    This just started today, also my downloads all say view.do instead of what i named them. What has happened and how do i fix it quick!!??

    The version 8.0.1 of firefox is what made this problem happen. I uninstalled the program and reinstalled an older version of firefox. Now everything is back to normal.

  • I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

    I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

    Hi
    The value of the Channel Strip volume etc is not stored within the C Strip setting, as you have discovered.
    If you really wanted, you could add a Gain plug to the strip, with it set to give the correct output level with the Fader set to 0
    (Or just set the fader manually in MS)
    CCT

  • I installed the new 5.0 version and it keeps telling me I have to resart my computer. But it wont finish the install after it resarts. What is wrong and how do I fix it?

    I installed the new 5.0 version of Firefox and the thing keeps telling me i have to resart my system to finish the install of an old version. I resart and it doesnt do anything. What is wrong and how do I fix this. I have been using firfox for more than a year now and have never had trouble till this issue came up

    If the toolbar installed something into the rest of the system, you will see an entry in the Control Panel in the software uninstall applet which should be removed. You might need to make a new profile if you cannot find an extension that has something to do with the toolbar.
    http://kb.mozillazine.org/Uninstalling_toolbars

  • Can't talk to other apple products outside of wifi or when I don't have data. What's wrong and how can I fix it ?

    So I just bought a new iPhone 4S and I have to share my data with four other people so to avoid using it up I use wifi whenever possible. I use iMessage to talk to iPhones but when I'm not around wifi or when I don't have any more data, I don't receive any of their regular SMS messages but I can send them. I checked my friend's iPhone and he receives my message as an SMS but when he replied it was still in iMessage. Is it not detecting that my iMessage is off ?What's wrong and
    how can I fix it ?

    I think I fixed the apps, though.
    *Turn off your wifi and only turn it on when you want to use it
    *Lower your brightness
    *Turn off "Push" on notifications and mail and turn on "Manual"
    *Return to your home screen and then double click twice and tap and hold one of the apps you've previously opened, when they jiggle tap the red on each app until fully erased.
    *Don't use your ipod while it is charging, allow at least a 10 minute charge (fully charged) before using it again.
    See if this helps(: ... I still have no answer bout the camera issue. I might be going to apple soon so we will see then.

  • I have a brand new mac book pro and suddenly I have a pixelated huge red diamond that showed up centered on my desktop.  What is it and how do I get rid of it.

    I have a brand new mac book pro and suddenly I have a pixelated huge red diamond that showed up centered on my desktop.  What is it and how do I get rid of it.

    No idea, take it back to the store, preferably with a camera shot or a command shift 3 screenshot
    Good Luck.

  • Help urgently needed, I have installed Logic Pro 9, since then my Final Cut Pro X keep freezing. Anyone what is wrong and how to solve it? I desperately need help on this. Thanks

    Help urgently needed, I have installed Logic Pro 9, since then my Final Cut Pro X keep freezing. Anyone what is wrong and how to solve it? I desperately need help on this. Apple support says I have to pay £85 for to help me. Thanks

    Just a word of advice. Never ever use the word "urgent" on this forum

  • I receive daily emails from the NY Times, which I read from my Ipad. Some of the emails will show all of the stories available, and some will only show a few lines in the body and the rest of the email is blank. Any ideas of what I need to do to fix this?

    I receive daily emails from the NY Times, which I read from my Ipad. Some of the emails will show all of the stories available, and some will only show a few lines in the body and the rest of the email is blank. Any ideas of what I need to do to fix this?

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

  • I have a 21" iMac that only boots as far as a folder icon with a question mark in it.  Anyone know what this means and how to fix it?

    I have a 21" iMac that only boots as far as a folder icon with a question mark in it.  Anyone know what this means and how to fix it?

    It usually means your OS has corrupted files. You need to reinstall OS X.
    If you are using Snow Leopard:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
    If you are using Lion:
    Reinstalling Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.

  • I've installed Flip4Mac WMV in Lion and when I try to listen to audio in some sites, it starts playing and after about 0.5 seconds it starts playing again. So, I have the same thing playing with a delay... What is happening and how to fix it?

    I've installed Flip4Mac WMV in Lion and when I try to listen to audio in some sites, it starts playing and after about 0.5 seconds it starts playing again. So, I have the same thing playing with a delay... What is happening and how to fix it? Is there any other way to play theese kinds of files without using Flip4Mac WMV?

    Use Flash Media Server to stream the files.......set up a timer and have all three of them play at once....and have a button switch the streams depending upon which stream you want to play.....and wallah......
    you can also capture the stream.time from the video playing and resume from that point on the other videos as well....havent done this theoretically so I dont know how smooth the transistion between streams will be....but it can be done....
    plus u may have to use double buffering techniques to make sure it starts up right away......
    thelegendaryghost

  • I have selected calendars on my iPhone and macbook to synch with icloud. This works if I enter items on the phone, but not if they are entered on the macbook. Any suggestions why this is happening and how to fix it?

    I have selected calendars on my iphone and macbook to synch using icloud. If I enter an item on the iphone, it appears on the macbook calendar but not the other way round. Any suggestions why this is happening and how to fix it?

    Dartiesdad wrote:
    Hmmmm  Snow Leopard and iCloud.... not usually workable but here is an article that might be helpful.
    http://reviews.cnet.com/8301-13727_7-57511534-263/how-to-set-up-icloud-services- in-snow-leopard/
    10.7.5 is not Snow Leopard so we have to wait and see, the answers to the question I asked will define what it really is.

  • Macbook air Wi Fi and sound stops every time it goes to sleep. i have to  restart it every time to use wifi and sounds. this started happening just after the latest upgrade to X. any reasons why its doing that and how to fix it.

    Macbook air Wi Fi and sound stops every time it goes to sleep. i have to  restart it every time to use wifi and sounds. this started happening just after the latest upgrade to OS X. any reasons why its doing that and how to fix it.

    Test after taking each of the following steps. Back up all data before making any changes.
    1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved.
    2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
    3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
    5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
    6. In some cases, the problem has been resolved by repairing permissions on the startup volume.
    7. Turn off Bluetooth and test.
    8. Reinstall OS X.

  • TS2776 I used my Ipod while at the gym one day and now it's acting wacky.  I have tunes that will not download due to an "unexpected error (-50).  Anyone know what this is and how to fix it?

    I used my Ipod while at the gym one day and now it's acting wacky.  I have tunes that will not download due to an "unexpected error (-50).  Anyone know what this is and how to fix it?

    looks like the gtk theme is not the problem. didnt really think it was, but the documentation was worth posting. the guys over at ubuntu look as though they have dealt with this in great detail, and have produced a few solutions, which may or may not work. i have decided to post these for anyone else who may have these problems.
    Solution 1 - new user creation:
    https://bugs.launchpad.net/ubuntu/+bug/104521
    Solution 2 - config file delete:
    http://ge.ubuntuforums.com/showthread.php?t=724439
    post number 6 here features the config file delete solution, as well as a link to another post which may be useful.
    judging by a google search on this problem and the number of responses that came up, the bonobo/daemon error is quite a common curse for the users of gnome, although much more common in distros such as ubuntu or fedora.
    i hope that this proves useful and if anyone has anything to add, please feel free. the more documentation the better.
    EDIT:
    another solution would be to remove gnome and reinstall it from scratch. (some please tell me if i am doing this correctly. thanks )
    1. clean your catch:
    pacman -Scc
    2. remove gnome, gnome extras, and whatever other gnome files you might have installed
    pacman -Rscn gnome gnome-extra etc...
    3. reinstall gnome and gnome extras
    pacman -Sy gnome gnome-extra
    4. reconfigure your desktop the way you want.
    Last edited by czechman86 (2008-05-28 23:42:43)

Maybe you are looking for

  • QUERY EXECUTION PROBLEM

    One query is executing very fast in database1 and the same query takes time to execute in database2. in database1 optimizer_mode=rule and in database2 optimizer_mode=all_rows How i can make the execution of the query very fast in database2. DATABASE1

  • My Philips hdtv plasma wont display my pb

    Please help. I had a regular hdtv before and never had problems. I have pluged to my 12" mini-dv adaptor, pluged to that is the DVI. Now at the other end of the DVI, I have a HDMI adaptor. My tv just stays black. I Called philips and they said try ch

  • Cancel online order

    Where did you go to cancel the order on line. What are the steps to find this process on verizonwireless.com which I know the corp stores have access to as well from thier computers.

  • Issue with Total Number of SODs at user level.

    Friends, Quick question - We are using GRC 5.3 Production on NT 20003 server. and back end systems are ECC 6.0 1.We added the Additional Role to one of the business users in ECC 6.0 2.We ran the FULL synch after adding this role in backend. Issue : T

  • How does aperture store pictures on external drive?

    Ok, I imported pictures to aperture, and I saved them on an external drive. The Library is on the internal drive. When I do editing, or try to share Pictures from Aperture, I have to connect my external drive. What I don`t understand is that I can dr