I have a 2.2 GHz Intel Core i7 macbook pro that has lion installed when I recieved it, according to the support pages AHT is supposed to work over the internet if it wasn't installed, Mine wasn't and it doesn't work. Where can I download it from?

I Have a 2.2 GHz Intel Core i7 macbook pro, I recieved it with OSx 7.2 lion installed, I need to us AHT (apple hardware test) according to the support page that I copy here
Additional Information
Apple Hardware Test is included on the DVDs that are shipped with some Macintosh computers. If the copy on your hard drive becomes unavailable, use the DVDs to run Apple Hardware Test.
For Intel-based Apple computers that shipped with Mac OS X v10.5.4 or earlier, Apple Hardware Test is located on the Mac OS X Install Disc 1 and should be included with your computer.
For Apple computers that shipped with Mac OS X v10.5.5 to 10.6.7, Apple Hardware Test is located on the Applications Install Disc 2 and should be included with your computer.
For some Apple computers that shipped with OS X Lion, if Apple Hardware Test cannot be found on the hard drive, an Internet-based version starts up instead.
This doesn't work as the additional information statement says it should above. Could someone at apple give me an idea of where to get it or what the "REAL" solution is, since it doesn't work on an internet version which was confirmed today at the Genius Bar in the Apple store.
Please help me

chrisfrommarion wrote:
Thanks, while it worked on yours it doesn't work on mine, any other ideas?
Are you holding down the "d" key, all by itself, just after the system shuts down for a restart?
And how long did you hold it down?
I held mine down for about 40-50 seconds. Then I lookat at my routers WAN light and it was flickering so I let up on the d key.
If that does not work then maybe there is something wrong with your MBP. Is that the reason you want to run this test, something isn't right with your unit?

Similar Messages

2 ghz intel core i7 macbook pro 10.7.2 and itunes 10.5.1

Hello,
I have a 2 ghz intel core i7 macbook pro using 10.7.2 and and I recently updated to the current version of itunes. Opening itunes, causes the entire machine to lock up. There is another thread that I was able to find describing similiar issues with the Macbook Air but I didn't see anything about the i7 macbooks. Is anyone else experiencing this or know of a work around?
Thanks.
I just wanted to update this.
There were apparently multiple firmware updates that were available (or a new one was posted since yesterday afternoon). Installing this one (4.2?) returned everything to normal.

It has to be a Core 2 Duo. Those are the requirements for Lion.
Requires a newer Mac.
Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM.

I have a new 2.0GHz Intel Core i7 macbook pro and my external firewire drive is causing the laptop to lock up

I have a new 2.0GHz Intel Core i7 macbook pro and my external firewire drive is causing the computer to lock up. The drive seems to sleep and then never wakes and the laptop locks up. I've had this drive connected to an older 2.0 core duo macbook pro and a 3.0GHz quad core macpro with no issues. It's a ministack v3 drive, 2GBs, fw400+800, sata and usb. Any ideas? And can I stop the drive from going to sleep?
Thanks.

Check with the drive's manufacturer to see if they might have a firmware update for the enclosure; it sounds like the enclosure's firmware isn't properly detecting the FireWire wakeup sequence.
Obviously this could also be a bug with the new MBP's firmware, so it wouldn't hurt to ask the Genius Bar at your local Apple Store; in particular, ask them to show you that the sleep/wakeup sequence on your MBP works with some other FireWire drive.

Is Protools 8.0 compatible with OSX 10.6.8 on my 2.2 GHz Intel Core i7 Macbook Pro?

Is Protools 8.0 compatible with OSX 10.6.8 on my 2.2 GHz Intel Core i7 Macbook Pro? I installled it, it starts to launch, and then always unexpectedly quits.

It would be best if you contacted ProTools technical support or their web based forums/support.
Good luck,
x

Is installation on 2.16 GHz Intel Core Duo (MacBook Pro)really not possible and why?

I would like to buy OS X Lion and install it on my MacBook Pro with 2.16 GHz Intel Core Duo, but this processor is not in the list of the specifications (Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7 or Xeon processor).
Is it really true that I can't install Lion on my Mac? If so, what is the reason?

It has to be a Core 2 Duo. Those are the requirements for Lion.
Requires a newer Mac.
Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM.

I have an iMac purchased new about 5 years ago with OS 10.4.11. I would like to upgrade to Lion. I currently have a 2.33 GHz Intel Core 2 Duo processor with 2 GB of ram. Can I upgrade to Lion, and what is the best way to do so?

I have an iMac purchased new about 5 years ago with OS 10.4.11. I would like to upgrade to Lion. I currently have a 2.33 GHz Intel Core 2 Duo processor with 2 GB of ram. Can I upgrade to Lion, and what is the best way to do so?

From what I read here:
http://www.tuaw.com/2011/06/06/lion-...u-2-gb-of-ram/
s long as they already have Snow Leopard 10.6.8 installed in it.All a person needs to do with that type of iMac is to upgrade/max out their Ram. They claim that an Interl iMac with Core 2 Duo is all that is needed, as long as it has OS 10.6.8 installed. They say you don`t need the "Core i3, Core i5, Core i7, or Xeon processor"
But I wonder about the RAM speed, the iMac 2.33Ghz uses DDR2 SDRAM, which I believe is rated at 667Mhz. Lion maybe installed but it might be problems running smoothly or not?
Did some quick checking and the iMacs apple is selling this year use 1333MHz DDR3 SDRAM.
The only thing to do is to make sure you have a good back-up, Install your RAM and install Snow Leo, then wait a couple of hours and install Lion.
Good Luck

HT5219 When I connect my MacBook Pro to a TV (Thunderbolt to HDMI) no display is recognized and I am unable to mirror. I have a 2.9 GHz Intel Core i7 with 8GB 1600 MHz DDR3 running OSX v 10.8.3.

When I connect my MacBook Pro to a TV (Thunderbolt to HDMI) no display is recognized and I am unable to mirror. I have a 2.9 GHz Intel Core i7 with 8GB 1600 MHz DDR3 running OSX v 10.8.3.

You are being scammed. Please ignore and close. Do not click any links or call any phone numbers!
Remove Browser Pop-up Problems
     AdwareMedic
     Adblock Plus 1.8.9
     remove adware that displays pop-up ads and graphics on your Mac

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

First, back up all data immediately, as your boot drive may be failing.
Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. What approximate values are shown for Reads in/sec and Writes out/sec?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

HT5167 I have a Mac 2 GHz Intel Core Duo running OS X 10.6.8. Can I upgrade to 10.7 on this Mac?

I have a Mac 2 GHz Intel Core Duo running OS X 10.6.8. Can I upgrade to 10.7 on this Mac?

no, you need an intel core 2 duo or higher: http://support.apple.com/kb/sp629

Why is my Macbook Pro running slow after I downloaded the new Lion software? I have a 2.26 GHz intel core 2 duo? whats Wrong?

Why is my Macbook Pro running slow after I downloaded the new Lion software? I have a 2.26 GHz intel core 2 duo? whats Wrong?

Spotlight may be indexing your drive(s). Click the Spotlight icon at the right of your menubar; if it shows things being indexed, that's at least some of the reason.

I have a 3.06 Ghz Intel cor 2 duo 4GB 1067 Mhz DDR3. Which update can i use.

I have a 3.06 Ghz Intel cor 2 duo 4GB 1067 Mhz DDR3. Which update can i use.

Yosemite. Back up your data, check your applications for compatibility, and download it from the Mac App Store.
If desired, you can instead buy a download code for Lion or Mountain Lion from the online Apple Store.
(123967)

HT1199 I have a 3.2 GHz Intel Core i3, 27 inch, Mid 2010. It used to run fast but now it seems to have slowed down like when surfing or opening applications. I downloaded all the updates restarted but it seem slow. How do I speed it up? Thanks

I have a 3.2 GHz Intel Core i3, 27 inch, Mid 2010. It used to run fast but now it seems to have slowed down like when surfing or opening applications. I downloaded all the updates restarted but it still seem slow. How do I speed it up? Thanks - ManongCA

Activity Monitor – Monitor Performance Problems
Why is my computer slow
Why your Mac runs slower than it should
Things you can do to resolve slowdowns see post by Kappy

Using Migration Assistant to move files from old PC laptop to new MacBook Pro that has Windows 8 installed containing Outlook

When using Migration Assistant to move files from old PC laptop to new MacBook Pro, that has Windows 8 installed containing Outlook, will emails, contacts and calendar entries be moved to Outlook on the new MacBook or into Mail, Contacts and Calendar?

I doubt they will. But then I'm not sure as I used a migration program once about 18 years ago and totally FUBARed the system I had at that time and I've never used one again.
For me the reason to have a new system is to start fresh. Installing only program that I now use and manually copying data over from the older system.
Not sure your older version of Outlook, and the outlook mail boxes, are compatible with Office/Outlook for Mac 2011.
A better place to ask this question would be on the MS Office for Mac forums.
Hope it all works out for you.

I have MacBook Pro with Mtn Lion. When cover is down, FaceTime will not ring the Mac from iPad. Can I set up to ring Mac

I have MacBook Pro with Mtn Lion. When cover is down, FaceTime will not ring the Mac from iPad. Can I set up to ring Mac

Well first, I must say "Yikes!!!"   I didn't know anyone still used Word Perfect.   That's an old school word processor right there... haha.
Okay, in all seriousnous, when saving your files in Word Perfect, use the Save As feature, and select a different format.   Word Perfect's format is likely not going to be opened by any of the popular word processing software.   I would try saving the document as RTF (rich text format), which is a universal standard across word processors.   This way, you can open the document on your Mac, or any other machine.
Now, I'm also assuming that you have a word processor installed on your Mac.   Right?   Maybe Word? Maybe Pages?   If you don't have a word processor, you'll need to get one.   If you don't want to spend the $10 on Pages, consider downloading Open Office (http://www.openoffice.org/download/).   This will give you a free word processor that you can use on your Mac.

TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.

You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line

I have a 2.2 GHz Intel Core i7 macbook pro that has lion installed when I recieved it, according to the support pages AHT is supposed to work over the internet if it wasn't installed, Mine wasn't and it doesn't work. Where can I download it from?

Similar Messages

Maybe you are looking for