I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected

I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected, i have tried shutting down and restartinf while holding down the trackpad, as recommended on some forums but that has done nothing
It might be a huge coincidence but the drive was working fine before i installed lion?

Installing Lion would not cause the superdrive to stop working. Are you unsure as to whether or no a cd/dvd is inside? Something may be broken inside and you should consider bringing it in for service.

Similar Messages

I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto '09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn't need it). I am totally happy with the

I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?

Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT

Have a 2 year old macbook pro that won't turn on--logic board?

We have a 2 year old Macbook Pro that will not turn on. A computer repairman said it's probably the logic board. Does Apple warrant that or are we just out $1,700?

When you attach the power adapter, does the led light up? If so, what color?
What happens if you press the external battery check button?
Have you tried a SMC reset?
http://support.apple.com/kb/ht3964
Have you had it evaluated at an Apple store genius bar or an AASP?
Ciao.

I have a 2 year old macbook pro os x 10.5.8 want to upgrade to lion

I have a 2 year old macbook pro os x 10.5.8 want to upgrade to lion

Mountain Lion Requirements:
http://support.apple.com/kb/HT5444
App Compatibility:
http://roaringapps.com/
Check both above first. Then call Apple Sales & have them send you a retail Snow Leopard Disk(US $29)...there is no download. Update to 10.6.8, then go to Mountain Lion or Lion if you like(US $19).
Don't know if Apple is still selling Lion...you'll have to ask Apple sales when you call. You need Snow Leopard to get the Mac app store where you can then purchase Mountain Lion...Lion is no longer available in the store.

Hi, I have a 3 year old Macbook Pro 13" and I accidentally cracked the outer screen of my mac book, however the LCD panel is fine and works well. Please advise what to do

Hi, I have a 3 year old Macbook Pro 13" and I accidentally cracked the outer screen of my mac book, however the LCD panel is fine and works well. Please advise what to do. I live in India and I have gone to authorised Apple technicians and they infomed me that I will have to replace the LCD panel as well even though it is not cracked, is this really true or can I just change the outer shell? Also they say that they cannot do it in India... can I do it myself at home?

Since it is 3 years old find a local repair shop that can replace the glass Only. you may have to send it out to a Non Local shop for that but there are some that specialize in doiing that on Mac notebooks.
Apple will ony replace the complete screen enclosure with all normal parts included, LCD, Camera, Aluminum housing and glass as one unit. Which is very expensive. Or you could just use it as a desktop system with external monitor and buy a new notebook.

My dictation on my macbook pro running mountain lion has stopped working on both my macs. Microphone works for all other apps WUZ UP

My dictation on my macbook pro running mountain lion has stopped working on both my macs. Microphone works for all other apps WUZ UP

What happens when you try to dictate?

My MacBook Pro's internal SuperDrive has stopped recognizing CDs/DVDs after Yosemite install

After upgrading to Yosemite, my MacBook Pro's (early 2011) internal SuperDrive has stopped recognizing CDs/DVDs after Yosemite install. It takes them in and will eject them with the keyboard button, but they will not mount. Disk Utility shows the SuperDrive and shows the inserted media, but will not mount the disk. That button is grayed out. Please help! I still have training libraries and music I access on such media. Thx!

UPDATE: I discovered some forum posts about a similar issue with Mavericks that recommended re-installing the system to fix the problem. I realized that I rarely restart my computer unless there's an update that requires it, and decided before undertaking a full re-install of Yosemite to simply restart my computer again. THIS WORKED! The SuperDrive is now mounting CDs and DVDs. Not sure what the issue was, but if anyone else has this issue I hope this will save you hours of frustration.

Have a 3 year old MacBook Pro and it won't turn on.

We have tried using another power cable and it won't take a charge. WE used our power cable and it works on another computer. We have finals at Va Tech and I need my computer. Can anyone confirm this a battery?

Your point is well taken. My apologies. Look at this and see if there is any useful information:
http://support.apple.com/kb/TS1367
Ciao.

I have a 3 year old Macbook pro, snow leopard. Do I need to upgrade?

Just wondering if I need to upgrade to Mt Lion or not or if I need to upgrade anything on it? Also, what can I do to make my computer to keep running smooth, since warrenty has expired? Using Mac OS X 10.6.8 snow leopard

cc12345 wrote:
Also, what can I do to make my computer to keep running smooth, since warrenty has expired?
Backups, especially bootable clones.
Most commonly used backup methods
Keep your performance up by learning how not to over tax your machine or over fill the boot hard drive.
Why is my computer slow?
How to safely defrag a Mac's hard drive
Don't use Safari as it's a older version on 10.6 and not receiving updates, use Firefox instead
Install AdBlock Plus into Firefox and Web Of Trust, search online for "Make Firefox 10x faster" if you have broadband and it will REALLY make your browsing faster as it downloads all the elements at one time, instead of one at a time like slow Safari does.
More information
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

HT5449 MacBook Pro 10.9 Dictation has stopped working

I'm on a MacBook Pro running 10.9. When I activate the Dictation function, the other sound source fades away and, as I speak, I see the sound response in the microphone icon. However, nothing gets typed on the screen. Any suggestions would be appreciated.
Thanks,
Peter Miller

Please read this whole message before doing anything.
This procedure is a diagnostic test. It changes nothing, and therefore will not, in itself, solve your problem.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as certain other aspects of the configuration that may have a bearing on the problem. Don’t be alarmed by the apparent complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode, if possible. If you’re now running in safe mode, reboot as usual before continuing. If you can only boot in safe mode, you can still use this procedure, but not all of it will work. Be sure to mention that in your reply, if you haven't already done so.
Below are instructions to enter UNIX shell commands. The commands are safe and do nothing but produce human-readable text output, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. I am not asking you to trust me. If you can't satisfy yourself that these instructions are safe, don't follow them.
The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
{ echo "Loaded kernel extensions:"; kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'; echo $'\n'"Loaded user agents:"; launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'; echo $'\n'"Inserted libraries:"; launchctl getenv DYLD_INSERT_LIBRARIES; echo $'\n'"User cron tasks:"; crontab -l; echo $'\n'"System launchd configuration:"; cat /e*/lau*; echo $'\n'"User launchd configuration:"; cat .lau*; echo $'\n'"Login items:"; osascript -e 'tell application "System Events" to get name of login items'; printf "\nRestricted user files: %s\n" $(find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l); echo $'\n'"Extrinsic loadable bundles:"; cd; find -L /S*/L*/E* {,/}L*/{Ad,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do /usr/libexec/PlistBuddy -c 'Print :CFBundleIdentifier' "$d/Info.plist" | egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|print|SoftRAID" && echo ${d%/Contents}; done; echo $'\n'"Unsigned shared libraries:"; find /u*/{,*/}lib -type f -exec sh -c 'file -b $1 | grep -qw shared && ! codesign -v $1' {} {} \; -print; echo; ls -A {,/}L*/{La,Priv,Sta}* L*/Fonts; } 2> /dev/null | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A TextEdit window will open with the output. Post the contents of the TextEdit window (not the Terminal window) — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
{ echo "Loaded system agents:"; sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo $'\n'"Login hook:"; sudo defaults read com.apple.loginwindow LoginHook; echo $'\n'"Root cron tasks:"; sudo crontab -l; echo $'\n'"Log check:"; syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
To prevent confusion, I'll repeat: When you type your password in the Terminal window, you won't see what you're typing.
Note: If you don’t have a login password, set one before taking Step 2. If that’s not possible, skip the step.
Important: If any personal information, such as your name or email address, appears in the output of these commands, anonymize it before posting. Usually that won't be necessary.
Remember, Steps 1 and 2 are all copy-and-paste — no typing, except your password. Also remember to post the output as text, not as a screenshot.
You can then quit Terminal.

Airdrop from macbook pro to iPhone 6 has stopped working

I have a MacBook Pro (Retina, 15-inch, Early 2013) with Mountain Yosemite 10.10.1 and an iPhone 6 running iOS 8.1.1
Recently my MacBook can no longer send items out via airdrop to my iPhone. I can see the iPhone on the MacBook and can receive files from the iPhone but can not get the MacBook to send items to it. This just started recently. Ideas? I've tried restarting the phone and the MacBook and this has not fixed the issue.
I also can't cancel out of the airdrop share either. I have to do a manual force restart on finder.

Open iTunes then login to your account and make sure the computer is authorized. Next go to the music tab and choose artists, songs or albums you want to sync. Click sync at the bottom of the page. At the top of the iTunes screen you should see the sync actions take place.

My 3 year old Macbook Pro is getting slow..

Hello, i have a 3 year old Macbook Pro which have been great use to me. When i first purchased it, the boot up time was extremely fast, and the general speed of the mac was superb. However 3 years later the machine take at least 3 mins to boot up and is pretty slow when i use it to carry out my daily tasks.
It originally came with Tiger but i upgraded to Leopard, basically i'm after advice on how i can increase the speed or how to make my mac as fast as it was 3 years ago. anyway help or information would be greatly appreciated. Many Thanks in advance.

Use a Utility like MainMenu or OnyX to clean out the caches, archived and temporary files.
Do a Parameter RAM reset - hold down apple/option/p/r keys at start up and wait for three chimes before releasing the keys.
Use Disc Inventory X to examine your hard drive and see a) if there's anything there taking a lot of space you can delete and b) that you still have 10%+ free space.
Consider doing a clean install of the OS and all Applications, it's a lot of work but is the one sure way of "starting over"

How to get audio to tv from 4 year old macbook pro

I have a 4 year old macbook pro, i am trying to view it on my samsung tv, i can get video thru the mini port adapter and hdmi cable, but i cant get audio?

If you Macbook Pro is a 2009 model the mini display port does not carry audio. You must use a separate audio cable from your computer's audio out to your TV's audio in.

My 3 year-old macbook pro is very slow. I have run disk utility and virus scan with no improvement. The "beach ball" will spin for minutes at a time when opening, closing or changing windows. Apple Store looked at it a few months ago with no help.

my 3 year-old macbook pro is very slow. I have run disk utility and virus scan with no improvement. The "beach ball" will spin for minutes at a time when opening, closing or changing windows. Apple Store looked at it a few months ago with no help. What can I do?

Under CPU: 3.5% user; 5% system; 91% idle; 441 threads; 90 processes.
Under System: out of 2GB - 54.7MB free; 530MB wired; 603MB active; 862MB inactive; 1.95GB used.
Is too much of the system memory tied up? If so, what can I do to free some up?

I am going to replace my 3 year old MacBook Pro with a new MacBook Pro Retina display machine. I have been told by Apple that I can use the Migration Assistant ON MY WIRELESS NETWORK (no cables) to transfer data... I've read this can take AGES.. True?

I am planning to replace my 3+ year old MacBook Pro with a new MacBook Pro, Retina display... I have been told by "chat" on the Apple site that I can transfer my data wirelessly... on my network.. Is is a good option? I don't want to invest in cables if I can help it... since the old machine has firewire and the new one has thunderbolt! Will the wireless transfer take forever... as in 30-50 hours??? I've been hearing these horror stories...

Ralph Landry1 wrote:
Recently did one MacBook Pro to another for my daughter...almost full 500 GB HD estimate wireless was 48 hours, wired took a little over an hour.
Wow, shocking in comparison. You have the patience of a Saint !

I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected

Similar Messages

Maybe you are looking for