I have a 2009 Macbook Pro and the charger stopped working. Will this charger work for it, or do i have to find an old 1 online?
I've looked into the replacement program and i don't qualify.
http://store.apple.com/nz/product/MC461X/A/apple-60w-magsafe-power-adaptor-for-m acbook-and-13-inch-macbook-pro
Wil this work for an older macbook pro?
Welcome to the Apple Support Communities
That charger is perfect for your MacBook Pro, so you can buy it and use it with your computer. If you want, you can buy the 85W one, that provides more power and makes the battery charge faster, at least for the 15 and 17-inch MacBook Pro
Similar Messages
-
I have a 2009 macbook pro and my email account is doubling every message I get. I've had it for about 3 weeks and this just started. Any help? Every time I get one email, I get 2 copies of the same message.
This discussion may prove useful:
http://forums.macrumors.com/showthread.php?t=88279 -
I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. the same thing happens when just trying to save my pictures from iphoto to a flash drive. suggestions to complete backup please?
Sounds like you'll need to access that drive while it is not booted. You need to replace it anyway, so do that, then one way or another (ext enclusure, et), access it and copy files.
If you keep trying to boot it, you might kill it for good and not get your files, so just swap it out first. -
I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. How can I resolve this issue?
I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. There are a number of issues I have run across:
If I have four tabs open on Safari then I start to get a flickering on the screen from the GPU refreshing
When I leave the computer alone for more than 20 mins the screen saver should start -- what happens is that the screen goes to black. When I move the cursor I do not get the login screen. I have to reboot
FireFox Web browser will not run
I get issues with the computer running very slowly
I have already turned off the transparency option in settings. Any ideas??
Cheers
Matt
MacBook Pro, OS X Yosemite (10.10), GPU / Video Card with YosemiteDo you have more than one OS on the Mac?
You may want to look at something like http://bjango.com/mac/istatmenus/. This has a Free Trial window, but it is a commercial application. If there are any heat/sensor issues, this may help.
A SMC Reset or PRAM/NVRAM reset may also help.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Startup key combinations for Intel-based Macs - Apple Support -
I have a new mac book pro and the os x mavericks says I don't have this and it won't install. What do I do? Thank you.
If you have a new MacBook Pro, it should already have Mavericks (10.9). To verify, click the Apple logo in the top left corner and select "About this Mac". What does it state for version?
-
I have a 2011 MacBook Pro and the battery has died what kind of battery do I need?
What kind or battery does my late model 2011 MacBook Pro need?
The one that your Apple Store or your Apple Authorized Service Provider will install. MBPs from 2010 on forward do not come with user-replaceable batteries and special tools are needed to remove the one within. Plus whatever one you get outside of the official channel will cost the same if new, so there is no sense in going solo on this.
-
I have a 2009 Macbook pro and I'm looking into updating my hard drive. 7mm or 9.5mm?
I have narrowed down my search to these 3 drives:
500GB 2.5" HGST Travelstar Z7K500 7200RPM SATA 3Gb/s 7mm Notebook Drive 32MB Cache
500GB 2.5" Seagate Momentus 7200.5 7200RPM SATA 9.5mm Notebook HD 16MB Cache
500GB 2.5" Western Digital 'Scorpio BLACK' 7200RPM SATA 9.5mm Notebook HD 16MB Cache 5yr WD Warranty
But I have no clue what height drive I have. I've looked and I can't find any details of the drive. Can somebody help me out? pleaseee and many thanks!mac notebook hard drives are 9.5mm.
-
I have been trying all different updates but nothing is working and i dont know what else to do. I'm running mac OS X 10.5.8 . Can anybody help me try to update my computer.
How far up the foodchain do you want to go? Up to the Hillside Cat? Can your Mac deal with it? Cause it needs at least 4GB RAM, preferably 8GB.
So, the road begins with you calling Apple and requesting a Snow Leopard install DVD. Only way to get it. Costs $20 and a few nickles for shipping. With that cat installed, you get the App Store. Then you get to decide whether you want to reach the summit and get the Mountain Cat, for another $20. -
I tried googling several solutions, but so far nothing seems to work. Everytime i start up my laptop i press CMND+R to make it go to the repair disk utility but instead it takes me as if i have to install lion when i had Snow Leopard 10.6.8. When i do go to the repair disk utility, on the eft hand side shows two hardrives one is Untitled and another is Hitachi, i tried downloading snow leopard 10.6.8 onto a Re-writable disc using my windows computer. When i insterted it onto the disc drive it came out under SUPER DRIVE and everytime i double click on the CD it says something about attaching images/ I also forgot to mention that the MAC OSX 10.6.8 Update shows on the left hand side on the bottom in DMG format. I dont know what else to do, please help?
DestroyGalaxies wrote:
a flashing folder came on with a question mark in the middle of it
This is the firmware telling you it can't find a bootable OS X volume.
Usually to solve this all you do is hold the option key down on the built in keyboard while booting the computer, this enters Startup Manager and then you choose OS X to boot, then in System Preferences > Startup Disk you change it to the boot volume and it tells the firmware.
Everytime i start up my laptop i press CMND+R to make it go to the repair disk utility but instead it takes me as if i have to install lion when i had Snow Leopard 10.6.8.
What you have is a 10.7 or 10.8 Recovery HD from when 10.7 or 10. was on the machine previously.
The Macintosh HD partition only was erased and 10.6 installed on it, without erasing the entire drive like what should have occured to remove the Recovery HD partition.
So you have a mucked up machine.
i tried downloading snow leopard 10.6.8 onto a Re-writable disc using my windows computer.
Well there goes your problem there, your downloading illegal copies of Snow Leopard from a untrusted location.
10.6 is not available for download, except from pirate sites. You likely have malware or a compromised system.
I dont know what else to do, please help?
What you need to do is call Apple via phone, tell them the make of your machine and order the appropriate 10.6 disks, they are inexpensive now. Some machines that came with 10.6.3+ origianlly need machine specific disks, other wise pre-10.6.3 Intel Macs can use the 10.6.3 white retail disks.
Once you have the disks, you need to backup your personal information off the computer to a external storage drive using the emergency quick copy method, then disconnect it to prevent mistakes.
Most commonly used backup methods
Next follow this proceedure and make sure to select the ENTIRE drive on the far left with the drive makers name and size, this will erase the entire drive, then install 10.6 from the disk
How to erase and install Snow Leopard 10.6
When finished setup the machine and log onto the Internet and use Software Update to get current on 10.6.8
Don't use pirated software, it's likely been compromised in some fashion. -
I have a 2006 MacBook Pro and the first apple screen loads but when at login the users won't show.
What can I do
Hey there Pinestreet87,
It sounds like your computer seems to boot but will not show your users so you cannot log in.
I suggest these steps from the article named:
Try a Safe Boot
If you're using Mac OS X 10.2 or later, you can start up your computer in Safe Mode, which includes an automatic disk check and repair. If you're using Mac OS X 10.1.5 or earlier, skip to the next section. A Safe Boot, which starts up your computer into Safe Mode, may allow you to start up your computer successfully using a reduced version of the system software. To do this, follow these steps:
Start up in Safe Mode.
After the system has fully started up, restart your computer again normally.
If the computer successfully restarts, you do not need to do any more troubleshooting. If the issue persists, try Disk Utility.
Try Disk Utility
Start from the Recovery System or Internet Recovery (OS X Lion or Mountain Lion).
If your computer shipped with a Mac OS X Install disc, insert the installation disc, and restart the computer while holding the C key.
If using a Recovery partition or Internet Recovery (OS X Lion and later): When your computer finishes starting up, choose Disk Utility from the Utilities window.
If using an installation disc: Choose Disk Utility from the Installer menu.
Important: If you started from an installation disc, do not click Continue in the first screen of the Installer. If you do, you must start from the disc again to access Disk Utility.
Click the First Aid tab.
Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
Select your OS X volume.
Click Repair. Disk Utility checks and repairs the disk.
Tip: With Mac OS X v10.6 and earlier, always start up your computer from an Install or Restore disc when using Disk Utility to verify or repair your startup volume. Otherwise, you might see some disk error messages.
Use fsck if necessary
fsck is a command-line utility that may be able to verify and repair a disk. If you can successfully start up in Safe Mode or use Disk Utility while started up from a disc, you don't need to use fsck. Here are some situations in which fsck may be necessary.
From: Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
Thank you for using Apple Support Communities.
Regards,
Sterling -
I have Late 2011 Macbook Pro and zxcv keys are not working?
I have late 2011 Macbook Pro and the zxcv keys are no longer working. Once I connect USB keyboard I can utilize these keys. Do anyone have solution?
How did you try to use Acitivty Monitor?
Open Activity Monitor, choose "All processes" from the list, and sort processes by CPU usage. More likely than not, there will be task using up good bit of CPU.
You could also try resetting SMC:
http://support.apple.com/kb/HT3964 -
I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?
Run MDP to HDMI for picture. Use a cable like this to run sound from your audio out on your Mac to your TV's audio in. That's about all you can do.
-
I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either it says that i have a newer bootcamp version. I tried a few tricks but they didnot work. I hope to be helped
Welcome to Apple Support Communities
You can install a 64-bit Windows 7 or Vista version in your Mac. Make sure you downloaded these drivers > http://support.apple.com/kb/DL1630 Also, if you have the Snow Leopard DVD you used to upgrade your Mac or the OS X DVD that came with your Mac, you can use it to install the Boot Camp drivers -
I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you advise? During installation emptied cache, etc. Backed up using time machine, fortunately.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
I have a 2009 macbook pro with os x10.9.2 and can't find drivers for windows
i have a 2009 macbook pro with os x10.9.2 and can't find drivers for windows. i trying to install windows using bootcamp but does not allows me to download the drivers..
From the system requirements page: http://support.apple.com/kb/HT5634 for your computer
MacBook Pro
(13-inch, Mid 2009)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, 2.53 GHz, Mid 2009)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2009)
4
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2009)
4
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Early 2009)
4
4
DVD
DVD
DVD
The drivers are located on the OS DVD that came with your computer.
Maybe you are looking for
-
i tried to restore it to it's original settings but when i tried to reinstall it, it would say that i hadn't bought it. so then i bought the lion os and the code took forever to come but now i cannot find anywhere that i can input it. i cannot access
-
How do i get my music from my phone onto my itunes on a computer?
How do i get my music from my iphone onto my itunes on a computer?
-
IPod Touch screen has gone white with grey lines
I have had my iPod Touch for a year and a half, so unfortunately it is out of warranty. About two months ago it started behaving strangely. Every other time I turned it on there would be a white screen which after a few seconds would get slightly dar
-
Have sound but no picture....until I unplug it
Since having the TV service hooked up about 3 weeks ago, I have had to reset my stb by unplugging it because at least a dozen times I have turned the TV on to find that I have sound but no video. I have my TV up via HDMI for the video and my sound i
-
Problems printing with Mountain Lion and Epson WorkForce 645.
Ever since I installed Mountain Lion I've been having problems printing on my Epson WorkForce 645. My initial problems started while trying to print from Google Chrome. The printer would always jam once I tried to print from the browser. I would ha