I have a 2012 MacBook Pro running OSX 10.8.5. I am noticing that when I try to drag an icon accross the screen it tends to stick for 5 to 10 seconds. Just did a reformat and reinstall of OS but no change. Any ideas?

when I try to drag icons accross the screen thet are sticking for up to 10 seconds. I have just done a recovery (reformatted and reinstalled the OSX 10.8.5 but no change. The activity monitor shows nothing out of the ordinary. I have a MacBook Pro 2012. I am having perfomance isues with ProTools and I'm wondering if the 2 are connected. I installes TechTools 7 and ran tests on everything and it says all is good. Any idea's? Thanks!
                                                                                                                                                           Jim

If you haven't already done so, eject the card by dragging its icon to the Eject icon in the Dock (where the Trash icon usually is.) Make sure the write-lock switch on the card is in the unlocked position. Then reinsert the card and test.
If there's no change, and the same happens with more than one card, the card reader is stuck in write-locked mode. I don't generally advise do-it-yourself hardware repair, but one ASC member managed to fix this problem. I haven't tried the fix myself and I can't offer any guidance beyond what's in that discussion. If you cause damage, don't expect your warranty to cover it. I suggest you instead make a "Genius" appointment at an Apple Store.

Similar Messages

  • I have a 2010 macbook pro running OSX 10.6.8 and I would like to interface my macbook to a HD tv. I purchased a interface cable but cannot seem to communicate with the TV. Do you have any instructions or tips that I can use to accomplish this task? Do I

    I have a 2010 macbook pro running osx 10.6.8 and would like to interface my mac to my HD tv. Are any instructions available to reliably make this connection and if so what is needed on my part. Is the software compatible or do I have to upgrade to a later version OS. Thank You,
    Gene

    I purchased a mini to HDMI cable and tried to connect to the TV but the TV is not recognizing the computer. I attempted to set sound and display settings under the "my Preferences" utility with no success.  Again, I'm not sure if I need to upgrade my OS software Any Suggestions?

  • I have a 2012 MacBook pro running Yosemite that will not power up. Any advice?

    I Am unable to power up my macbook pro. It has been working fine up to this afternoon. I was using it, stepped away and when I returned it was off and I am not able to get it to turn on. I have tried switching power sources but nothing seems to work. I would appreciate any advice

    Hello Jlearoyd and welcome to Apple Support Communities,
    First try resetting SMC,
    Reset SMC
    http://support.apple.com/en-us/HT201295

  • HT1338 I have an older macbook pro running OSX 10.6.8. Should I upgrade the OS?

    SHOULD I UPGRADE FROM 10.6.8?

    10.7 or above will not run your PPC based programs, so that's a cost.
    10.7 or above will need 4GB or more RAM, so that's a cost.
    10.7 or above is slower than 10.6, so that's a cost in performance
    If your machine is out of AppleCare, then if 10.7/10.8 hoses your machine somehow (like it did mine), then your screwed and have to buy a new one.
    If the machine originally came with 10.4 or 10.5, then you certainly don't want to upgrade past 10.6.8 and slow it down, just run it until the wheels fall off.
    I only advise Early 2011 machines and later to upgrade to 10.8, then only under AppleCare.
    Apple is issuing security updates for 10.6, installed anti-virus, and it has about 30% version market share, so your safe for now.
    Harden your Mac against malware attacks
    Security Issues Warning List
    Read for maximizing your Snow Leopards performance/repair etc
    Why is my computer slow?
    For Snow Leopard Speed Freaks
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • Have a macbook pro running osx lion, connected a kindle fire using micro usb to transfer pictures and the disk icon won't show up on the desktop.  When I ran disk utilities the kindle does show up there.  Any thoughts as to why it's not recognizing?

    Have a macbook pro running osx lion.  Connected a Kindle Fire using micro usb and the disk icon doesn't show up on the desktop.  Also sometimes get a message sayiing computer doesn't recognize device.  When I opened disk utilities the Kindle disk does show up there.  What am I missing?

    cashworth wrote:
    Kindle is connected directly, not thru a hub.  Also called Amazon Kindle support, tech was baffled when I told her I was using a Mac.  She said, "I'm not really familiar with apple products." 
    Precisely why it's not an iPad, and why it doesn't cost very much.  An Apple rep would tell you how to connect an iPad to every computer.
    Go here:  http://www.amazon.com/gp/help/customer/display.html/ref=sv_kinh_9?ie=UTF8&nodeId =200127470

  • HT3625 I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running  mountain Lion 10.8.2

    I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running  mountain Lion 10.8.2

    Because line-in has been removed.
    It does allow for an Apple headset with mic., but I don't know if it would work with third-party ones.
    You'll need to use a Griffin iMic or similar to use line-in via a USB port.
    The same goes for the 15" retina, the newest MBA and the new iMac (whenever it finally arrives).

  • I have a new Macbook Pro running Mavericks and safari consistently freezes. It takes several 'return/enter' presses to get to the page I requested. I have seen other comments and replies on how to fix (clear cache, clear extensions/plug-ins), to no avail.

    I have a new macbook pro running mavericks and only using Safari as my browser.  75% of my url requests are 'hung up' and freeze.  I have seen other posts and have tried to clear cache, reset safari, remove extensions, but to no avail.
    Any recommendations?

    If it works in a new user account, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About

  • I suddenly cannot open facebook on my macbook pro running OSX 10.8.4. I am traveling in Vietnam, if that means anything. . .

    Hi. I've been traveling, using facbook on iphone and my macbook. Suddenly I cannot access Facebook. I prefer to use Safari as my broser, but I downloaded Mozilla tonight to just see if it was a browser issue. The problem carries over into Mozilla Firefox. Both say they can't find the server. However, I can access facebook through my iPhone.
    Can anyone help me so I can use facebook through my computer--I'd like to use it on my computer. I use Macbook Pro running OSX 10.8.4. iPhone is iPhone 5 running 6.1.4.
    Thanks,
    EST

    Try enabling the Personal Hotspot on the iPhone and connecting the Mac to the Internet thru it. If Facebook works ok then, that would mean the ISP is either blocking or having connection problems whereas the phone carrier is not.
    Be mindful that carrier data charges can be outrageous so use this as a test first.

  • I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. How can I resolve this issue?

    I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. There are a number of issues I have run across:
    If I have four tabs open on Safari then I start to get a flickering on the screen from the GPU refreshing
    When I leave the computer alone for more than 20 mins the screen saver should start -- what happens is that the screen goes to black. When I move the cursor I do not get the login screen. I have to reboot
    FireFox Web browser will not run
    I get issues with the computer running very slowly
    I have already turned off the transparency option in settings. Any ideas??
    Cheers
    Matt
    MacBook Pro, OS X Yosemite (10.10), GPU / Video Card with Yosemite

    Do you have more than one OS on the Mac?
    You may want to look at something like http://bjango.com/mac/istatmenus/. This has a Free Trial window, but it is a commercial application. If there are any heat/sensor issues, this may help.
    A SMC Reset or PRAM/NVRAM reset may also help.
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    Startup key combinations for Intel-based Macs - Apple Support

  • When printing from aperture my margins are unequal, even if i set my margins they come out bigger one side  and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000

    when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side  and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
    please can anbody help or advise?

    You didn't mention any color calibration being done on your monitor.  This is an essential part of any color-correct workflow.  What are you using to calibrate your monitor (and your printer)?
    Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer.  The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
    I don't know what you mean when you say "I choose a high standard print option".
    Have you read the User Manual chapter on printing?
    Printing Your Images
    There is also a good appendix on calibration:
    Calibrating Your Aperture System

  • My roland Ua-25ex usb audio interface audio input no recognised by macbook pro running osx 10.

    my roland Ua-25ex usb audio interface audio input not recognised by macbook pro running osx 10. ...the audio outputs are ok but the (audio in) input preference  for the UA-25ex is greyed out and the sliders for input volume etc  are disabled ... and I can only record voice by using the macbook pros onboad microphone not the usb interface 

    Logic Users
    Looooong Tutorial for beginners
    MacPro Videos on Logic
    i have all the logics but i don't know them deeply.
    i like some of the music files/loops you get bundled with it, there's plenty to get started.

  • Is it possible to downland itunes 10.6.3  I  have an old Macbook pro with OSX 10.5.8 and lost my itunes and cannot seem to download a version compatible with the computer

    is it possible to downland itunes 10.6.3  I  have an old Macbook pro with OSX 10.5.8 and lost my itunes and cannot seem to download a version compatible with the computer?

    Click here.
    (69952)

  • My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8.

    My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8. I have tried updating to mavericks through the mac app store but after it downloading for a day i got an error message saying there was a problem with the download. The same thing happens if i try to update itunes or the mac app store. After research, i have also tried repairing disk permissions, but every time they do get repaired the 'repair' button still appears, i'm not sure if it's because it was unable to repair the initial problems or if it just keeps detecting new ones.

    2 GBs is a minimum in which you can do many things, but not concurrently. Be very careful to not install third-party add-ons, limit the number of applications you choose to enter in Login Items, run as few applications concurrently as you demand.
    I would consider adding more RAM to your computer. Your model supports 8 GBs, so I would install that.

  • HT1338 I have a 2009 MacBook Pro running OS X 10.5.8. How do I upgrade to 10.6 or later??

    I have a 2009 MacBook Pro running OS X 10.5.8.
    How do I upgrade to 10.6 or later??

    Click here and buy it on DVD.
    (75849)

  • I have a new macbook pro running lion and want to update the software on my ipod touch. My old macbook ran 10.4.11 and won't update - but the new computer says I have to update on the computer I normally sync on or my music will be lost. Solution?

    I have a new macbook pro running lion and want to update to ios 5 on my ipod touch.  My old macbook only has 10.4.11 and can't be updated to lion - and won't update my ipod touch to ios 5.  But the message on my new macbook pro says I have to update on the computer I normally use for syncing or my music will be lost.  Is there any solution for this?

    try exporting your iTunes libary from the old computer to the new one
    take a look at this from apple
    http://support.apple.com/kb/HT4527
    I am not sure you have home shareing with 10.4.11 but if you do it works very nicely
    Mike

Maybe you are looking for