I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. Help
I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.
There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
Similar Messages
-
Trying to connect an XBOX 360 to my airport base station via ethernet cabl
Hello,
I have the older snow airport base station and was trying to connect my xbox 360 to it via an ethernet port. There are only 2 ethernet ports on the snow base station. one is being used by the cable coming from my dsl modem. the other free port i tried plugging into my xbox 360 to no avail. the xbox cant get an ip address. the open ethernet port on the base station is labeled with the circle logo. the one being used by my dsl modem has the two outer pointing arrows. I turned off the airport to my macbook and tried to connect my macbook to that port my xbox was in and it would not connect to the net either. Is it possible, i have the ports backwards. my wireless internet for all 3 mac computers works fine. Any help would be greatly appreciated!!!!
Thanks!!!
VinnyYes, you have the ports connected backwards.
The WAN port is labelled with the "circle of dots" icon, and must be connected to your DSL modem.
The LAN port is labelled with the "double-headed arrow" icon, and that is where you connect ethernet cabled devices on your LAN.
See Apple's article AirPort Base Station: About the WAN and LAN Ports
What is surprising is that you haven't previously run into all sorts of problems with your existing setup. Once you cable things properly, you will likely have to power down your DSL modem and Base Station for a while (sometimes just an instant, sometimes overnight). After waiting, plug the modem into power and wait a minute. Then plug the base station into power and wait for it to restart. -
i am not able to hear any sounds of games on the speaker. Though the sounds function on the head fones. The speaker works perfect in other applications except games.Have checked all the settings but not able to fix it.
Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound. Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and its the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
If that doesn't solve it then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I bought a $15 app GTA Vice City a while ago and I just started using it and it doesn't work. I checked all the requirements and my laptop meets all of them. I also have contacted Rockstar Games and they didn't help. Can I get my money back? Its frustruating.
Hi...
Apple's policy states that, "all sales are final" > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
But since you are not getting any help from the developer, you can use the email form to contact Apple and ask for a refund > Apple - Support - Mac App Store - Contact Support.
No guarantees. -
I just changed i Pads and i cloud was working great on all the devices I had it on including my PC now it just keeps asking me to verify my password and I know I have not made a mistake and I don't have ICloud on any of the devices at present help!!!!!
That has to be frustrating...
Frequently Asked Questions About Apple ID
If nothing at that link helped..
Contact iTunes Billing:
http://www.apple.com/support/itunes/
Click: iTunes Store Account & Billing / Billing Inquiries / Email Us -
My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume. I have been in system prefrences to check all the sound settings and everything is set properly. What do I need to do to fix this. Help!
Though I have doubts for success, you might try a SMC reset. It can do no harm. Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
http://support.apple.com/kb/HT3964
Ciao. -
Why are my Whatsapp photos not showing in the Camera Roll? I have checked all the settings and everything seems ok.
Have you enabled "Save incoming Media"
in your whastapp\Setting\Chat setting\Save Incoming Media? -
InfoPath form load rule is not checking all the rows in form library
Hi,
Requirement:
We have a form library named "HR Annual Review". In the InfoPath form we have two buttons "Save" and "Submit". User is allowed to Save multiple times and only once using Submit button. The file name of form library "HR
Annual Review" will be stored in the format “<username>+<mm>+<dd>+<yy>.xml”. Say for example, an user named Mike Walt submitted a form then the file name will be as “MikeWalt012314.xml”. If the same user (Mike Walt)
submits the form and tries to open the form for subsequent edit, then we need to show a view which has an error info saying “The Appraisal is already submitted for the current appraisal cycle”.
Solution we tried:
To achieve the above requirement, we tried using InfoPath Form Load and add a rule to check whether the combination of current user name and the year already exists in the filename column of the form library. But the rule we applied is not checking all the
rows in the form library. The rule is always checking the first row of the form library.
What we need:
We need the validation using InfoPath rule or some other way/solution to check whether the combination of current login username and current year file already exists in the form library.
Thanks in advance.
Srivignesh JHi Srivignesh,
Submit button Uses the Main Data connection to submit the data to the list. This is what you are using and naming the file in the format. You can create secondary data submit that will update the exiting item in the list. With this, you don't have to create
any rules to check all the rows which is also not possible in OOB InfoPath.
Once you have the two data connection, hide the toolbar from the form and display these two on the button. For The Submit button, apply the rule to hide the button if created by is not empty. For Save button, apply the rule to hide the button if Created
By is empty. This way, when a new form is created, you will see the Submit button, and when the user have to update the form, they will see Save button. Hope it help.s
Regards, Kapil ***Please mark answer as Helpful or Answered after consideration*** -
Formscentral is not working again. All the open forms become blank either in IE or Chrome. Please check.
Yes, we're still working on it. I will update the Announcement at the top of the forum as we have more of an update.
Thanks,
Josh -
When I tap the mail icon on my iPhone 4s, the menu of email servers pops up. I already have a me acct that I check all the time, no problem. So I choose iCloud, sign in and it tells me that I already have an acct….so why can't I get to my emails then? I've turned the phone off and on twice....that has fixed it in the past but not this time....
all fixed ha
-
When I send a email, the people get it with my daughters email as the one who sent it. I have checked all the settings ...help
Does your daughters email address show up as one of the options in the From line as discussed above? If so, try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe!
-
I have a MacBook Pro running OS X 10.7.5. I would like to sync my contacts from my iPad with my MAC. I've checked all the appropriate boxes in iCloud on both devices. What am I not doing or doing wrong?
Bobby D,
Thanks for the help. I learned quite a bit from your answer. Turns out I was looking in Outlook for the MAC instead of Address Book on my MAC which already had all my contacts. Once I imported them to Outlook, problem solved. It will be interesting to see if when I add a new contact it updates Outlook.
Thanks again,
rpayne556 -
My phone randomly doesn't ring when people call and not sound the text alert. I checked all the settings and them seem to be correct. Sometimes it rings, many times it doesn't. I have missed several calls. Same with texts. Anyone know how to fix this?
Symptoms
No ringer sound
Go to Settings > Sounds > Ringtone and select a ringtone. Does the device ring? (YES: Issue resolved) (NO: Go to step 2)
Go to Settings> General> Reset> Erase All Content and Settings. Warning: This will delete all user data on the device. Verify that you have a backup before proceeding. Go to Settings > Sounds > Ringtone and select a ringtone. Does the device ring? (YES: Issue resolved) (NO: Go to step 3)
Restore device using latest version of iTunes. Go to Settings > Sounds > Ringtone and select a ringtone. Does the device ring? (YES: Issue resolved) (NO: Contact Apple for service options) -
Hello
After upgrading iPhoto 9.1.2 when you synchronize the iphone / iphoto ipad events are not copied correctly (this option checked all the photos on itunes).I found this other thread discussing this topic, no fix, I will revert to 9.1.1 from Time Machine and wait for a new update.
https://discussions.apple.com/thread/3023160? -
My IPad sound keeps turning off. I have checked all the settings nd they are ok. I have to reset it all the time. It is very frustrating as I use it as an alarm, need I say I've waken late a few times.
I'm having the same problem?
Maybe you are looking for
-
How can I tell what control the modulation wheel is assigned to?
Hello, I understand how to reassign the Mod Wheel and other controls with Command-L. However, once I deleted my learned assignments I realized that the modulation wheel had not been working as it should with the thousands of other presets. Apparently
-
I'm having his error come up whenever I try to uninstall bootcamp 1.4 /windows xp Boot Camp Assistant Beta Has Expired I want to get rid of boot camp all together so how do I get around this?
-
Itunes 10.5 mobile device helper has been stopped
Hi guys, I got a problem with my itunes, after it upgraded, the mobile device helper will stopped when itunes is open. And when I tried to connect the iphone 4s, it stop responds. I have been reinstall itunes for 3 times, and I already installed the
-
Problem with track times and importing
Importing CDs onto my iTunes is usually OK, but on one CD a couple of tracks transfer to iTunes with incorrect playing time. Track 7 which is 2:54 shows on iTunes as 37:09; track 8 which is 3:25 shows on iTunes as 789:57:13 and will not play after be
-
How do I adjust Ken Burns Default when importing Clips?
Creating a slide show in iMovie and dragged a large number of jpeg photos in as clips. iMovie proceeded to render them all with the Ken Burns effect. Unfortunately, the end product displays the zoomed in close up. And it's zoomed to the max (5.00). C