I have a 3rd generation iPad running iOS7.0.2, and since updating to iOS7, it will not mirror to an AppleTV.  The devices will connect, but the video monitors show only a blank screen.  The AppleTV's work fine with various other iOS & OSX devices. Ideas?

I have three AppleTV's where I work.  I have two at home.  I have an iPhone 4S running iOS7.0.2 which mirrors smoothly via AirPlay.  I have a 2011 MacBook Pro and a 2011 iMac, both running Mountain Lion, both of which mirror smoothly through AirPlay.  I have a 3rd generation iPad running iOS7.0.2, and since updating to iOS7, it will not mirror.  The iPad will connect to the AppleTV, but the TV's and projectors only show a black screen when connected: the iPad screen looks as it should, except that the transitions become jumpy when connected via AirPlay.  This is true on both networks: at home and at work.  Another gentleman using the network where I work has the most recent iPad, also running iOS7.0.2, and he is having the same problem.  I have tried to "Reset All Settings."  I have tried to "Restore."  Does anyone have any suggestions?  Has anyone else experience difficulty mirroring the iPad through AirPlay since the release of iOS7.0.2?

No problems exists with the router (on either network described above) or the multiple AppleTV's which are able to mirror multiple other OSX & iOS devices seamlessly. The problem is strictly with the iPad and iOS7.
The following information was helpful:
Big Apple fan
Re: AirPlay with AirServer connectivity problem
Oct 14, 2013 9:43 AM (in response to ceb2652)
This is an iOS 7 AirPlay mirroring bug...
To make matters worse, the iPad automatically drops its mirroring session 45 seconds after it auto-locks.
3-4 mirroring sessions is all it takes for the iPad mirroring to freeze up.
After this happens, mirroring to an Apple TV only projects a blank screen.
Once the mirroring is hung, the only way to fix it is to restart the iPad.
Apple please fix this iOS 7 issue!

Similar Messages

  • "Window" drop-down shows no windows, if it's the 'primary' window; works fine with all other windows.

    The first time I opened Firefox after the 'upgrade' to 34.0.5, it restored all of my windows and tabs from the previous session, as it should. But the Window drop-down showed only "Minimize" and "Zoom", and didn't list any windows, not even the one I was in (I'll call it the 'primary', since it's the one that was listed first). If all of the windows were minimized, I would have nothing, but once I made a new window, all of the windows would show up in the Window drop-down. After some trial-and-error, it appears to happen *only* when the active window is the 'primary', it works fine when any other window is active.
    How can this be fixed?

    As I stated I already did this and it was not helpful. The drive is not near capacity, but I could not give you an exact answer on how full it is. I know my data is still there as I can see items but just cannot access any windows or menu items as no text is displayed.

  • HT4437 Would I be able to use Air Play, Apple TV, and an iPad running iOS7 in order to mirror an iPad running the Safari web browser onto an HDTV?

    Would I be able to use Air Play, Apple TV, and an iPad running iOS7 in order to mirror an iPad running the Safari web browser onto an HDTV?

    Yes.
    Basic AirPlay: Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
    Mirroring: When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), swipe from the bottom of the screen, tap the AirPlay icon and choose your Apple TV from the list of devices (iOS 7 or better) or double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices (pre-iOS7)

  • My charger just stopped working. The cord has no visible damage and the plug box works fine with other phone cords. I've had my phone

    My charger just stopped working. The cord has no visible damage and the plug box works fine with other phone cords. I've had my phone for less than four months now. Will Apple provide a new charger if theirs is faulty? I have not dropped it in water or anything. It was a normal day and I had 20% battery and I tried to charge my phone and it wouldn't charge. The charging pug box works fine with other phone USB cords so I know its something to do with the charging cord.

    Eklms wrote:
    My charger just stopped working. The cord has no visible damage and the plug box works fine with other phone cords. I've had my phone for less than four months now. Will Apple provide a new charger if theirs is faulty?
    Yes.
    Everything is included in the warranty.

  • Cant open web pages when connected to the internet via Telstra's Pre Paid WiFi has anyone else had the same issues works fine with BigPond WiFi

    Cant open web pages when connected to the internet via Telstra's Pre Paid WiFi (this connection is working on other devices) has anyone else had the same issues, works fine with BigPond Wifi

    and now, when i tried to check again my network preference below the airport tab is showing a message that
    "my airport does not have an IP address and cannot connect to the internet!"
    then after seconds it will goes back to the first message that
    "airport has the self assigned IP address etc....."
    i don't know whats going on now!
    airport tab is not showing green color anyway! i'ts always in yellow!
    i tried turning it on and off but nothing happen! HEEELLLLPP!!!!

  • My up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

    my up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

    No need to worry about the disk version. You would just have to install an update anyway as soon as it was installed. Download from the link provided below and use the serial number you have to activate.
    Product updates

  • I updated the epson printer drivers like it asked, only to find out that my epson 1400 is not compatible on 10.8, the original driver worked fine, but now it prints terrible, how do I re-install back to original?

    I updated the epson printer drivers like it asked, only to find out that my epson 1400 is not compatible on 10.8, the original driver worked fine, but now it prints terrible, how do I re-install back to original?

    Do you have a TM backup or a clone? If so, erase the drive and restore with TM or clone back.
    If not you'll have to reformat and re-install the OS that shipped with your Mac. If it shipped with Lion or ML you can do the restore from your Recovery Volume
    EDIT: I assume you are saying that you just installed 10.8?

  • Why does my 3rd generation iPad freeze on an app and then go to the home screen immediately?

    Well, my new iPad closes the application and goes to the homes careen. This has been happening on my iPad 2 recently but then I bought the 3rd generation iPad and it does the same thing but more often, Can somebody tell me if this is normal and if it isn't can I send it back and get a new one? And if I get a new one will it do the same thing? Thank you sooo much!

    If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in apps, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.

  • I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off.  How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

    I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off.  How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM.  My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore.  Connected those drives to TM via firewire and could see the drives and access them.
    Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed.  I heard that bridging slows down everything and then there can be port issues with mail etc.  I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads.  Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system.  I really didn't want to monkey around too much with my system.  But are there other options to connect the new TC.  Can't find info anywhere for this and called apple who gave me the info above.  after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light  or repair it in disk utility if it should become corrupted.
    For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working.  Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
    Now a rant.  I can't believe in this wireless age that Apple would make a product that cant join a wireless net work.  The apple rep said i could return it and look for the previous TC that would join an existing wireless network.  Are we going backwards?
    Thanks!
    lennydas

    Ok... it is getting a bit clearer but there are still some questions.
    I connect to the internet via airport only and it is pretty fast.
    I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
    Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed.  I heard that bridging slows down everything and then there can be port issues with mail etc.
    I think this is mistaken.
    Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
    If the computer is close it will be faster than the FIOS.
    You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
    I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC.  the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
    Thanks again!
    You cannot extend to a non-apple wireless router.
    You cannot use join a wireless network because when you do the ethernet ports will be cut off.
    But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
    Join in the express is the only apple router that still allows an ethernet connection.
    For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

  • I have loaded the new Flash version into Firfox several times, but none of my sites recognize it when using Firefox. It works fine on all other browsers, but I would prefer to use Firfox if this problem can be solved.

    I use Firefox 4.0.1 on a Mac running Os X10.5.8. When I try to run Facebook or other sites that are heavy users of Flash I get a message that the new version of Flash must be loaded. I have loaded the latest version several times, but still get the message and these sites will not run on Firefox. The sites run fine with Safari or Chrome but I prefer to use Firefox if it can be made to run these sites. Thank you for any suggestions you have to help fix this problem.

    Apparently it's related to the Firefox plug in.
    This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
    1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
    2. Select to "Options
    3. Select "Applications"
    4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
    5. Open a test PDF. It should open in it's own window now.
    Again, not a complete solution but something that'll at least let you scroll with PDFs open.
    More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033

  • I am trying to log in to face time with my normal apple ID but it keeps telling me that it cannot log in yet it works fine with itunes etc?  any suggestions

    I am having trouble loging in to FAcetime with my normal apple ID, it says its not connected but the id works with itunes etc.  any suggestions???

    I seem to be having the same issue, however, no browser has worked for me.
    I have tried on my windows pc, Firefox, IE, Chrome and Safari. As well as using the command prompt to force open the link with this command: iTunes.exe /url "itmss://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/longUrlHandler?cacheK ey=MZFinancelinkAccountPageb95c64b3df2e3a30a8d94ee87dbeb12f&ign-mscache=1&ign-ms r=http%3A%2F%2Fwww.disneymoviesanywhere.com%2Fsetting%2Faccount%2Fsync-account%2 F"
    When this all failed I went to my parent's iMac and logged into my itunes account there and used Safari on their machine but I got an error saying that the itunes store wasn't avaliable. I authorized that computer as well.
    I'm at wits end here. I really just want to make this work
    Edit: Thae farthest I have gotten it to go is to open itunes. It loads to the store then just does nothing. No prompt to link accounts.

  • We recently purchased the iphone5 (2) and are having problems with sound coming thru the earbuds when we plug them in to the iphones.  works fine with the ipad.  help please

    recently purchased the iphone5 (2 of them) and are having problems with the earpods.  no sound when plugged in to the iphone.  both phones.  works with the ipad.  help please

    Hi P5052,
    Welcome to the Support Communities ... and congratulations on the purchase of your iPhone 5's!
    It is very unusual that neither phone is working with the new earpods. 
    Have you tried a different headphone just to see if the issue is with the earpods or the iPhones?
    The article below will give you the basic troubleshooting steps for this issue.
    Click on the link below to see more details and screenshots. 
    I've quoted some helpful highlights for you:
    iPhone: Can't hear through the receiver or speakers
    Symptoms
    When someone calls, I can't hear them through the receiver or speaker phone, and I can't hear music through the speaker. I also can't be heard by someone who is calling me.
    Note: iPhone has one speaker, which is adjacent to the dock connector. On iPhone 4 or later models, the speaker is to the right of the dock connector. On earlier iPhone models, the speaker is to the left of the dock connector.
    Resolution
    Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    Make sure the Ring/Silent switch is not switched to silent.
    While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
    Restart the iPhone.
    If restarting the iPhone doesn't resolve the issue, try restoring the device.
    If the issue persists, go to the Service Answer Center - iPhone for information on service.
    Hope this helps!
    - Judy
    <Edited by Host>

  • TS2756 I have always been able to tether my Windows PC to my iPhone 5 Internet. Lately, it connects but will not connect to the Internet. The Internet is working fine on my phone. iOS 7.0.4 Any ideas?

    I have tried resetting network settings, resetting the phone and the PC, uninstalling iTunes, turning off the firewall and has no luck

    Do this. Go to Apple menu / System Preferences / Network.
    In the left column, click Wi-Fi. Next click Assist me, then Assistant. Follow the on screen instructions.

  • Hi everyone, I have a  4s which I love to bits, but I am having problem with the camera it works fine with no flash but as soon as flash is turned on it does go like a white blurry dark picture, I have warranty till end of feb but no box am I covered stil

    Please if any one can help be grateful

    Take the plastic protective sheet off the back of the iPhone.
    The plastic is diffusing the flash so that it shines directly back into the lens washing out the picture.
    Also if you have not removed the plastic protective sheet from the front, you want to do that as well, since the front sheet covers the microphone as ear speaker making it difficult to hear.
    All of this happened to my wife :)

  • HT4367 Anybody has a solution for network time and day set up for apple tv 3?I also have difficulty about my apple id and password with the apple tv. My password/apple id  works fine with my other gadgets. Thanks. Ugur Erkmen

    My problem started after the itunes update.i  reset the apple tv.Now I cannot sign to itunes and i cannot reset the network time and day.

    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Maybe you are looking for

  • "Failed to open report" error while running reports

    We have a web application develeoped in ASP.Net, SQL Server 2005 , Crystal Reports 10.0. Sometimes if a large number of users run reports from their individual nodes they receive an error  "Failed to open report ", if we restart the IIS they are able

  • Help Please! Syncing from my ipod touch

    I've connected my ipod to my computer as per and it's synced all the purchases i've made on my ipod to my computer, but just at the end it gives an error message and lo and behold i've lost about 1000 songs. Not sure where, or which ones, but my numb

  • Improper message in iview when "Check in Now " fails in edit locally

    Hi We have implemented our own repository manager. I am facing a problem while Checking in a document after edit locally. Usually edit locally undergo followings set of activities. 1.     Get the content of file using Content manager implementation a

  • File upload fails if name of the file is in Japanese

    Hi all, I posted this message before, but could not get any response. So posting again. In my JSP app, I am using the latest MultipartRequest class to develop the file upload functinality through a form. Till now I was using MultipartRequest old rele

  • Can't get JSF scriplet value.

    Hi all... I have a problem here when i'm applying EJB with JSF. Here is my code. EJB project package com.ejb; import javax.ejb.Remote; @Remote public interface daoCalculator {      String getMessage(); package com.ejb; import javax.ejb.Stateful; impo