I have a 4th gen nano that is loaded with my music library via a prior addition of Windows. I now have Windows 7 and when I access I-Tunes and plug in my ipod I get a list of my music but cannot play it. Open to suggests on how to solve this problem.
I have a 4th gen nano that is loaded with my music library via a prior addition of Windows. I now have Windows 7 and when I access I-tunes and plug in my Ipod I get a list of my music but cannot play it. Open to suggestions on how to solve this this problem.
You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.
Similar Messages
-
I have an imac osx 10.5.2 from about five years ago and recently my flash player stopped operating/responding. Does anyone know if I have to install a new flash player? I have attempted it several times and it won't let me. I would appreciate any suggestions on how to solve this problem. Do I need a new operating system?
Why have you not updated to 10.5.8?
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later: -
I have 4th gen nano that won't sync to my new laptop windows 7 I transfer everything off of my old pc onto my new one so all of my music was in my itunes library and it still is but when I go to sync new songs it keeps asking me to authorize my computer and it is already authorize just don't know what to do anymore. Should i deauthorize the 2 computers that it is saying that are authorize and start over? Please help
See here: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
B-rock -
In Chile with NEW 4th Gen Nano that won't charge
I am visiting in Chile with my family and we have two NEW 4th Gen Nanos that won't stay on after being unplugged from the computer. My daughter has a 1 year old MacBook and I have a HP PC with Vista. She had a 3rd generation Nano that worked fine on her USB port and all my PC's USB ports are 2.0 compatible. Help???
See here: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
B-rock -
I have tried EVERY suggestion Adobe has made and no matter what, I get the black "Adobe Reader Installer" screen EVERY TIME!! Any suggestions to help me overcome this problem would be appreciated. BTW: I have a Windows 7 Home OS. I prefer FireFox. I have successfully downloaded Adobe Reader using all the major browsers, however it does NOT matter, I am NOT able to actually install Adobe Reader, every time all I get is the black pop-up "Adobe Reader Installer" screen!!!
PS.... I had a previous version on my computer that needed to be updated.... so I uninstalled it because I was having trouble installing the new version.... so even that did not help!!
-
My computer sees the auto duplexer on my Epson Stylus PX720WD but iworks says it is not installed. I have contacted Epson and I have the impression that they don't know how to solve this problem. Anyone got any ideas?
If you print to PDF first, and then print it from Preview does it work?
-
when starting imovie I get an error missing quicktime components. To solve the problem I have upgraded to latest version but it didn't help. I want to either solve this problem or get a refund for the useless upgrade.
Mac OS X 10.6 includes QuickTime versions 10.0 and 7.6.3. The QuickTime 7 player will only be present if a QuickTime Pro key was present at the time of installation, or if specified as part of a custom install, or individually downloaded:
http://support.apple.com/kb/dl923
Snow Leopard update 10.6.4 included an update to 7.6.6 (if installed). You can install it from the above link even though it says for 10.6.3. It's the same version of QuickTime Player 7.6.6.
(Only QuickTime Player 7.6.3 or 7.6.6 can be updated to "Pro".)
iMovie does not, AFAIK, use QT 10. -
In most of my email attachment the logo ( Mimi attachment ) show and I can not open that attachment , why and how to solve this problem ???
iPad 2, iOS 7When did this start? What was the last thing you changed before problem started?
Have you tried sending the attachment from a different account. Have a friend send you an attachment. Get a gmail account.
Send the email with attachments to two different accounts one to your ipad and the other to a gmail account in a web browser and not on an iPad. See if you can read the ones to the gmail account.
You did reboot your ipad?
Standard stuff for ipad.
http://www.my-iguru.com/ipad/ipad-hints-tips/ipad-viewing-saving-email-attachmen ts.php -
I am no longer able to double click on a file and have it open. Any suggestions on how to resolve this problem?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!
Go to Settings/General/Reset - Erase all content and settings. the connecto to iTunes and restore as a New phone. Do not restore any backup. If the problem persists you have a hardware problem. Take it to Apple for exchange.
This assumes that the phone is not hacked or jailbroken. If it is you will have to go elsewhere on the internet for help. -
I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?
Hi jstutsman,
If you are having issues with your iPod nano not being recognized in iTunes after a recent update, you may find the steps and links listed in the following article helpful:
iPod not appearing in iTunes - Apple Support
Regards,
- Brenden -
I have a problem in my iphone 4 with wi-fi after update to IOS6 please can help my how can solve this problem?
Nope
One needs to press the home and sleep / wake keys together for the phone to reset
The other thing I could recommend
Let the battery run out and the phone completely "die"
It may take a day or two with it not being used
Then plug it in to charge and see if there is any change in behavior
If you cannot get this to work - you may need to bring it to an Apple store -
My iPhone is a iPhone 3GS. For some reason, the ringer becomes silent although I have put the ringer on full volume. Would someone kindly teach me how to solve this problem? Many thanks!!
Just to make sure... you have the phone in ringer mode right? Sometimes the switch on the side gets bumped (especially if you don't have a case on the iPhone) and goes into silent. If you see a orange line on the switch - it's on silent.
If the switch is fine (and isn't loose or anything) try restoring the iPhone in iTunes. -
When I try to sign on to Mac App Store I get the message "Your device or computer cannot be verified" Yet I can sign on in iTunes no problem. I've tried all the suggestions from App Support but no luck. What am I doing wrong?
What troubleshooting techniques have you tried? Have you restarted the app? Have you restarted your computer?
One idea is to Trash this file; Mac HD/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist and restart. -
Ipod touch 3rd generation is not charging in Bose Docking station. How to solve this problem ?
My ipod touch 3rd generation is not charging in the Bose Docking station (manufactured 2005). How to solve this problem ? SOftware required or hardware adapter required ? Thanx
- Is the iPod fully seated in the dock?
- Does Bose say the dock is compatible with your model iPod and it iOS.
- Did it every work?
- Some users have reported that their iPod did not fully work with their dock after updating the iOS on the iPod.
There or no setting for docks.
Maybe you are looking for
-
Table type with include structure
Hi All, How to declare a table type with include structure i am declaraing it in the following way its giving epc check of obselete statement, could any one tell me how to declare a table type and internal table for the following code. DATA:BEGIN OF
-
Refresh Standard Business Area - Now have multiple flexfield segments
Hi, Having a problem with one of the business area's not showing the correct folders in a UAT environment, so i refreshed the Business Area (right click -> refresh). We have 2 chart of accounts, 2 sets of books, 2 operating units etc, and now its add
-
How do i save an imovie so that i can be able to edit it after i reinstall my OSX
I really need to save this imovie that i have created into my hard disk but i also want to be able to edit it after i reinstall my OSX thing as everything will be earased from my laptop. Please help this imovie means so much to me
-
Combo Box navigation and update
i need a frame which will popup up the value from database into comboBoxControl and using the navigationBar to navigate the data. But when i click the insert , it will allow me to select the same data from the database. Which item in the property sho
-
Finding java.util.MissingResourceException exception
I want to access the parameters which are set in the '.properties' file using "ResourceBundle" . I am accessing this in '.jsp' file but I am finding the exception as - 'Exception while Downloadingdoc:java.util.MissingResourceException: Can't find bun