I have a 5 year old MacBook running OS X v10.5.8 Of course Apple does not provide an OS update and then other software apps won't update because the OS is obsolete. Is there a way of upgrading the hardware so the software can be made current?
I have a 5 year old MacBook running OS X v10.5.8 Of course Apple does not provide an OS update and then other software apps won't update because the OS is obsolete. Is there a way of upgrading the hardware so the software can be made current?
10.6.8 Combo Updater
The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service. They have on-line instructions on how to replace the RAM. OWC has also tested RAM above what Apple states is the maximum. I now have 6GB installed on a early 2008 iMac supposedly limited to 4 GB and noticed an improvement.
Crucial
Other World Computing
Similar Messages
-
I have an 8 year old MacBook Air running OS X 10.6.8. Can it handle an upgrade to Lion and then to Snow Leopard or is hardware incapable. Additionally, I have a 3 year old Mac Mini running same OS X 10.6.8, with new solid state hard drive. Can I upgrade that one?
8 years old? Not likely. The first MBA was released in January 2008. It can be upgraded to Lion although it meets only the minimal specifications to run Lion. Snow Leopard would likely perform better than Lion on that hardware.
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
An Early 2009 Mac Mini is capable of running Mountain Lion.
Upgrading to Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
If you need to purchase Snow Leopard you can still purchase a copy from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
If you need to purchase Lion call 1-800-692-7753 or 1-800-676-2775. Ask for a Sales Representative. They will check your Apple ID, and email you a code and instructions. The cost is $29.99 (as it was before) plus tax. It's a download.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion. -
I am confused about Icloud. I have a 5 year old Macbook, a 2 year old macbook and a 5 year old mac mini. What exactly do I need to do to get all this connected via Icloud. I also have an Iphone 3G. Help please! Also, I still don't understand exactly what the benefits are. At the moment it seems a lot of hassle to change a system that's been working perfectly well and that I'm very happy with. I'm not at all sure whether the mac mini (1.66 GHz INtel Core Duo) can be brought up to the relevant spec to run ICloud. Any thoughts?
There are two aspects to iCloud. One is simply getting an account, or migrating a mobileme account to iCloud. The second part is using the various features of iCloud to sync contacts, calendars, use music match or photo sharing, and store iWorks documents.
First to get an iCloud account:
If you have a mobileme account, you can migrate by simply logging onto www.icloud.com (ignore any references to Lion and just click through to complete the migration). If you have OS X Lion or an iOS 5 mobile device, you can create an iCloud account on that device using any valid AppleID.
Once you have an account, you can use JUST the mail account if you wishi - it is a standard IMAP account so you would set it up like any other IMAP email account you have, in whatever client program you use to read email.
To use the OTHER feautes of iCloud, your computers will have to be running OS X Lion (10.7). Your iPhone 3G will never be able to use iCloud as it cannot run iOS 5 (you need a min. of an iPhone 3GS to run iOS 5).
The requirements for OS X Lion are here - http://www.apple.com/macosx/specs.html You need a min. of a Core 2 duo processor so you mini is not capable of running Lion.
So, in your case, the single reasons for iCloud would be if you have a mobileme account, then use the online www.icloud.com to migrate your account so you do not lose your @me.com email address. You can use iCloud email (without using any other iCloud features) by setting it up as IMAP mail with these settings - http://support.apple.com/kb/HT4864
If you want an iCloud account and do NOT already have a mobileme account, you will need to upgrade one machine at least to Lion in order to be able to create an iCloud account. -
I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT -
I have a one year old Macbook Air 13. I have a brand new 22" external monitor. In turning the Macbook and monitor on, the monitor displays very well, but within a few minutes it begins this incessant blinking (temporary black out of the screen that lasts anywhere from 1-5 seconds). This has been going on for a long time (it also happended with my older monitor which apparantly I threw out when I should have kept it thinking it was the problem). From reading various blogs in the Apple support community, this appears to be a widespread problem, but I don't find a solution, only a lot of speculation. I'm very surprised the Apple folks haven't figured this out. As a new Apple user, heretofor, I have been very impressed with the support and effort to get fixes out to users. This, however, has me frustrated to the point of junking my Mac and going back to a PC. I love the Macbook Air and most of the functionality, but I cannot function without an external monitor. Anybody have any ideas, please help. Frustrated, Jim
Your dsplay is getting extended onto the external monitor. Chcnage the setting to duplicate it or only display on the external monitor and you should be fine,
Let me know if this worked for you. -
Have a 2 year old macbook pro that won't turn on--logic board?
We have a 2 year old Macbook Pro that will not turn on. A computer repairman said it's probably the logic board. Does Apple warrant that or are we just out $1,700?
When you attach the power adapter, does the led light up? If so, what color?
What happens if you press the external battery check button?
Have you tried a SMC reset?
http://support.apple.com/kb/ht3964
Have you had it evaluated at an Apple store genius bar or an AASP?
Ciao. -
I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected, i have tried shutting down and restartinf while holding down the trackpad, as recommended on some forums but that has done nothing
It might be a huge coincidence but the drive was working fine before i installed lion?Installing Lion would not cause the superdrive to stop working. Are you unsure as to whether or no a cd/dvd is inside? Something may be broken inside and you should consider bringing it in for service.
-
I have a 2 year old macbook pro os x 10.5.8 want to upgrade to lion
I have a 2 year old macbook pro os x 10.5.8 want to upgrade to lion
Mountain Lion Requirements:
http://support.apple.com/kb/HT5444
App Compatibility:
http://roaringapps.com/
Check both above first. Then call Apple Sales & have them send you a retail Snow Leopard Disk(US $29)...there is no download. Update to 10.6.8, then go to Mountain Lion or Lion if you like(US $19).
Don't know if Apple is still selling Lion...you'll have to ask Apple sales when you call. You need Snow Leopard to get the Mac app store where you can then purchase Mountain Lion...Lion is no longer available in the store. -
Hi, I have a 3 year old Macbook Pro 13" and I accidentally cracked the outer screen of my mac book, however the LCD panel is fine and works well. Please advise what to do. I live in India and I have gone to authorised Apple technicians and they infomed me that I will have to replace the LCD panel as well even though it is not cracked, is this really true or can I just change the outer shell? Also they say that they cannot do it in India... can I do it myself at home?
Since it is 3 years old find a local repair shop that can replace the glass Only. you may have to send it out to a Non Local shop for that but there are some that specialize in doiing that on Mac notebooks.
Apple will ony replace the complete screen enclosure with all normal parts included, LCD, Camera, Aluminum housing and glass as one unit. Which is very expensive. Or you could just use it as a desktop system with external monitor and buy a new notebook. -
請求幫助，我有adobe正版軟體，但是序號不見了，有辦法查到之前的紀錄或求解決辦法嗎?
Request the help, I have the adobe the original software (Adobe Creative Suite 6 Design & Web Premium), but the ordinal number is missing, there is way checking before recording or begging the solution
Does anyone know how can I do? Please help,thank you very much.Hi there,
I'm not sure that I understand. Are you trying to find the order number or serial number for your Adobe software? If so, please see Find your serial number quickly - Adobe.
Best,
Sara -
Several html widgets I created contain the javascript libraries. Is there a way to create a common javascript library that can be accessed by all my widgets? I'm trying to reduce the size of the ibook I'm creating.
Seen this thread?
Can javascript libraries be shared across widgets? -
I have an iPhone 4, and I go to Settings, General, Software Update, and it says iOS 5.1.1 and I tap on the Install Now, and Agree, then i get the verifying update, and then it says "unable to install update, an error occured installing iOS 5.1.1
I have exactly the same problem. iPhone 4S, never been jailbroken. Not behind a firewall and it happens whether I am on my home compute (iTunes) or directly thru Settings_Update.
Looks like loads of people are having the same problem - and as far as I can see, Apple's sole reply is jailbreak or behind firewall/ security settings/anti-virus. None of those apply here! -
Can I updgrade an old Macbook to Mountain Lion so I can put stuff in iCloud? I am currently running Snow Leopard but I've been told this machine will not upgrade to Lion or Mountain Lion.
First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.
The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard. The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion. The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion. -
3 year old macbook running slow
I have had my macbook for three years now and recently it has started to run super slow. what can i do?
Macbook. Three years old. Starting to run slow.
My first guess is a failing hard drive. How much free space do you have? If you are out of space on your startup drive, that could cause problems too. The fix for both issues is a new hard drive. You will need a good backup. If you don't already have one, now is the time to get it. -
I have noticed that my computer is running super slow, even when I only have one application (like Chrome) running for a short amount of time.
First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the system log for messages that may indicate a hardware fault. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|nspace-h|n Cause: -' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.
Maybe you are looking for
-
Is there any standard setting of the shipment, where if I trigger shipment start button, system automatically trigger the vehicle status from available vehicle to vehicle movement is in progress. Currently we have manually status of the vehicle, and
-
I have the 1st generation mini and on a couple of occasions it will freeze up..it's usually on a song, or in the "Play list", etc. when it happens. In the past I have had to wait until it went dead, then when I plugged it into either the computer or
-
Can't Get speech recognition to work.
When i try to get speech recognition to work nothing happens. I have calibrated it, it regognises everything i said when i calibrated it. I know i am using the right microphone (internal) and it works because you can see. When i click on speech comma
-
Requirement is to display cross tab report in the format mentioned below Currency Denominations ----------------------------------1000-------500---------200--------100----- AED ---------------------------abc----------xya----------pqr-------www ------
-
Unable to create application -2147024891
<p>I am setting up Planning v4.1.1.1 on a windows server 2003machine and get errors when trying to create anapplication in the planning desktop. Theerror code I get is as follows:</p><p> </p><p>Unable to create application</p><p>Error Number: -21470