I have a brand new airport extreme. I just ordered a WD My Book Studio 2TB Mac External Hard Drive Storage USB 3.0 Can I partition this and use one 1tb as a time capsule and 1tb on my desktop of my mac as a wireless hard drive? If so how?

How would I do this?

To partition the WD My Book, you could temporarily connect it to your MacBook Pro via USB. Then use the Disk Utility to partition it into two separate partitions of whatever size you choose for each.
Once partitioned and formatted (I would recommend HFS+), you can then disconnect the drive from the MacBook Pro and attach it to the new AirPort Extreme. The Extreme should now "see" the drive as two separate drives. You would then use the AirPort Utility to share out both drives.
For Time Machine, you would just need to select the appropriate shared drive.

Similar Messages

Just bought a brand new Airport Extreme and having trouble with it being recognized. I have a Mac version 10.5.8. Is my computer compatible? I have the Airport Express now and it works fine.

Just bought a brand new airport extreme and having trouble with it being recognized. My mac is version 10.5.8. What should I do?

The new AirPort Extreme needs the 6.x version of AirPort Utility, which comes packed in with Lion 10.7.5 or Mountain Lion 10.8.x......or......you can also configure the device using an iPhone or iPad running a recent iOS.
From Apple's Specifications:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
A few options.....
Borrow another Mac running Lion or Mountain Lion for 10-15 minutes and set it up. The Mac running 10.5.8 will be able to connect to the wireless....but it will not be able to make any changes to the configuration of the Extreme.
Update to Lion or Mountain Lion.....but check first to make sure that your Mac will support the operating system first.
Use....or borrow an iPhone or iPad to set up the Extreme

Brand New Airport Extreme Doesn't Wake the iMac

I have been having MASSIVE problems with Back To My Mac, so I figured the Airport Extreme was the problem, since it was two years old. I replaced it with a brand new one. Now I have two problems: Back To My Mac still doesn't work, and the brand new Airport Extreme cannot wake the iMac.
The iMac has "wake on network access" enabled. The two-year-old Airport Extreme was able to wake the iMac.
What do I need to do to enable this feature on the new Airport Extreme?

No, that doesn't address the problem. The two-year-old Airport Extreme could wake the iMac with either a wireless or an ethernet connection. According to Apple's documentation, if the preferences say "wake on network access" it means both should work, and they used to.
The brand-new Airport Extreme cannot wake the iMac at all. When I installed it, I used the new Airport Utility to copy the settings from the old one. Could it be that some setting necessary for waking the iMac was set incorrectly by this process? If so, how do I correct it?

Brand new Airport Extreme Base Station flashing Amber light

hi
I know this question had been addressed before , but i couldnt find satisfying answer yet
I bought this Brand new airport extreme base station, I hooked up my ethernet cable into WAN Port as per the manual.
I installed airport utility 5.1 on my windows xp SP 2 laptop
and then I powered on the base station
The light in front was Solid Amber and then it turned Flashig Amber .
I tried resetting the base station and Cable modem. but no luck with Flashing Amber Light
Any Help for beginner Apple user?
thanks
Airport Extreme Base Station ( 802.11n) Windows XP SP2

Here is another post that addresses your question:
http://discussions.apple.com/thread.jspa?threadID=1005682&tstart=15

I have a brand new iphone 5 it just stopped working after i updated to the 7.6 help?

i have a brand new iphone 5 it just stopped working after i updated to the 7.6 help?

Connect it to iTunes on your computer and Restore it. See: http://support.apple.com/kb/HT1808

Brand New Airport Extreme and Motorola Surfboard 5101 Connection Dropping

I'm going to add to the chorus and point out that my brand spanking new Airport Extreme continually loses internet connectivity with my Motorola Surfboard 5101 modem (this is used on a Time Warner connection).
Disconnecting the Airport and connecting directly to the modem via ethernet cable works flawlessly as does using my old Linksys router. With the Airport Extreme it will work for a number of hours and then drop the internet connection. Airport Utility shows the Airport Extreme as having a green light while the internet connection has the amber "disconnected" light, but, as I said, cutting the Airport out of the connection leaves my internet connection stable and flawless so it seems the problem is either the Airport or the combination of the two.
So, is the only solution to replace the cable modem with one that works with the Airport? If so, how do I know what will work and what won't?
Should I return the Airport? Get a completely different 802.11ac capable router (which one)? Perhaps there is some arcae setting buried deep in the bowels of one device or the other that needs setting?

It's ok, I got. You have to put in password "BT" Never had to do that before, but it works....maybe this helps someone else.

HT201371 I have a brand new 5S running ios 7.04. There's no "Edit" button on the screen, no apparent way to delete a non-working scan and the scan part does nothing. ios bug or ???

I have a brand new iPhone 5S running ios 7.04. I can't get the "Touch ID" to work and I'm convinced it's a software issue. I read Apple's post on the subject (iPhone 5s: Using Touch ID) and the screens they show in the article are NOT what I have on my phone. Mine has no "Edit" button and there appears to be no way to delete a failed scan. The rest of the OS seems to be okay - I've no idea what to do.

I'm not sure why you are not seeing the Edit button. I have it on mine. However, you should be able to delete the finger by swiping it from right to left and a red delete button should appear.

Brand new AirPort Extreme has only flashing amber light

Hi all,
I just brought home an airport Extreme Base Station 802.11n to get online with my snazzy new MacBook Pro. So, I hooked the router up to my cable modem as per instructions, and all I get is a flashing amber light. I've tried rebooting the modem, and still zip. There's nothing wrong with my internet connection ~ when I connect either the desktop or the laptop via Ethernet directly to the modem, I get on line immediately. But I just can't get the base station to connect with the modem. I've waded through the forum and haven't found an answer, and since Apple no longer provides a phone number in their manuals, I have no way to get an actual human to walk me through this. I don't know whether I'm missing some crucial step, or if I have a defective base station and am just spinning my wheels trying to get it to work. Any assistance would be MUCH appreciated!
Thanks, Kate

OK, I'm putting this back out to the group.
I've tried resetting the AEBS back to factory settings, I've unplugged and rebooted the modem & AEBS numerous times. I tried to install the 7.5 firmware, but my MacBook can't see the AEBS to perform the installation, and still, no internet connection and the persistent flashing amber light.
Comcast tells me they don't support routers, so they can't check to see if the AEBS is visible on their end ~ but I'd bet it isn't.
I'll try Apple's support line tomorrow, but in the meantime ~ has anyone else experienced this level of problem, or does it sound like I have a faulty unit?
Thanks!
Kate

Brand new airport extreme not found on utility on iPad

I Just purchased the AirPort Extreme. My first Apple router but all of our devices are apple products with the exception of our pc. Extreme is flashing Amber light and is not found in the airport utility app. I want to enjoy this apple product as much as the others but it's becoming difficul.

OK, thanks for clarifying that for me.
If you have the Setup Guide handy that came with your AirPort Extreme, please head for page 12 and locate the heading to......
Setting Up AirPort Extreme Using an iOS Device.........To Set It Up
The steps here are pretty clear, and we rarely get a question about this but, we'll go through this in case you might have missed something.
1. Tap Settings on the iPad home screen. Settings is the gear looking icon there. Then, tap WiFi. WiFi is on the left side of the screen.
2. Tap the name of the AirPort Extreme. AirPort Extreme is located just under the heading of SET UP NEW AIRPORT BASE STATION there.
In the example below from an iPhone screen, I am setting up a new AirPort Express. So, I would tap on AirPort Express. You will see AirPort Extreme on your iPad screen, so you would tap on AirPort Extreme.
When you do this, that will start up the setup wizard.
3. Follow the onscreen instructions to create a new network or extend an existing network. The setup wizard will analyze the network and suggest the correct setup for you.
Once the AirPort Extreme has been set up, then you can use AirPort Utility to edit or modify any of the settings that you might need to adjust.

Brand new Airport Extreme base station- erratic power on behaviour

It doesn't power on the 1st time on opening the box, bring back to distributor and power on flawlessly there.
Bring back home again, carefully check all power connections including back of airport, transformer and the wall power outlet.
Other equipments, computer, printer, switch, etc. sharing the same wall power outlet had no power problem.
Sometimes power on with light, sometime don't (no lights at all); when it power on, sometime its turn itself off without any notice.
Any help please.
Message was edited by: wulee

OK OK. Am I bad luck. try a few more times at different sites with different power socket, still no luck.
Try HK support, just ask u to reset, and reset, check connection, etc. without much real help to the issues.
Now the the transformer is certified dead, no more power up even after hours or rest.
Perhaps the transformer is not that compatible with the power supply.
I'm not quite satisfied with the post-sale service I obtained, as the product had not been functional since i bought it brand new Dec last year.
Anyway. I'd not recommended this product for use Hong Kong.

Where can I buy a power cord for my brand new Airport Extreme serial number C86MJ3E0FJ1R ?

I lost the power cord and don't know where to buy in the apple store.

Amazon
http://www.amazon.com/Genuine-EADP-20BB-supply-AirPort-Extreme/dp/B00AAQ3JE8/ref =pd_sim_sbs_e_1?ie=UTF8&refRID=07Z3H174172XDAET831A

Can I connect my new AirPort Extreme to a PC as the hub instead of a MAC?

Hi,
I bought a new 27" iMac today and an AirPort Extreme. However, my husband and I want to connect the AirPort Extreme to our cable modem and our PC laptop as the "hub," and then wirelessly link my iMac, my iPhone, my iPad, and our Apple TV to it. This is because of where our cable jack is located.
Is this possible? It seems not to be working when hooked to the PC??
Cab nan anyone help me?

Basically it is going to not be possible..
If you want to run the Airport Extreme a long distance from the cable modem.. then either buy an express and plug that in to the cable modem and wireless extend that to the TC..
Or buy a set of EOP adapters and use that in place of ethernet.. which is the one and only "RIGHT" way to do it.

Brand new Airport Extreme...has slow loading..

When I first got it , it was blazing fast...went out of town for two week and it has gotten slow....it just takes like 10 15 seconds to load the page....I went hard wire from the modem to my mac book pro and it was instant...so it has to be the airport....I have and express piggy backing from it but that didnt seems to affect it prior....any thoughts?

OK, I'm putting this back out to the group.
I've tried resetting the AEBS back to factory settings, I've unplugged and rebooted the modem & AEBS numerous times. I tried to install the 7.5 firmware, but my MacBook can't see the AEBS to perform the installation, and still, no internet connection and the persistent flashing amber light.
Comcast tells me they don't support routers, so they can't check to see if the AEBS is visible on their end ~ but I'd bet it isn't.
I'll try Apple's support line tomorrow, but in the meantime ~ has anyone else experienced this level of problem, or does it sound like I have a faulty unit?
Thanks!
Kate

Brand New AIRPORT Extreme base station

This new baby set up quickly and effortelessly, BUT, today I got a message from the good ole TIVO saying it would stop recording since it no longer had a connection to the net so I went into the settings and found the new network and hit enter and a message came up saying that WPA was not supported.
I then ran back to the router and jumped in trying to find some way to get WEP to show up for the tivo and wpa2 for our cpus, no luck. My old linksys wrt did it fine but now the extreme can not. Can someone point me in a direction where I may find help? I have scoured the sites and I am not finding anything that is working. Or, if this can't be done at the moment that would be great too.
Thanks
Mike

Sorry, I'm not following this.
Are you saying that you need to set up WPA2 and WEP simultaneously?
If the Tivo can only work with WEP, then you will need to choose that option in AirPort Utility and the computers will need to use WEP.
Can you post a bit more information?

BRAND NEW Airport Extreme Wont Connect to Internet

I'm trying to set up my AEBS and I run the wizard and everything checks out ok, then when the router restarts it says that I do not have a valid IP address and that it is looking for my PPPoE host.
I connect directly to my DSL modem via the Ethernet cable that WAS in my WAN port and it works fine, so I know my modem is fine.
Any suggestions?

Try changing from PPoE to "Ethernet" set Configure IPv4 to "DHCP"
This is done in AirPort Utility (manual setup)>Internet
Powerbook G4, MacBook Pro, Mac G5, Mac G4, Mac Mini Mac OS X (10.4.8)

I have a brand new airport extreme. I just ordered a WD My Book Studio 2TB Mac External Hard Drive Storage USB 3.0 Can I partition this and use one 1tb as a time capsule and 1tb on my desktop of my mac as a wireless hard drive? If so how?

Similar Messages

Maybe you are looking for