I have a camera kit for my ipad 1 but when i put sd card does not recognize anything, do I need an app? thanks for your help

I have camera kit but unable to use with sd card from my digital camera. Anytime I plug it in nothing happens. Do I need an app? thanks for your help

I have the same issue also...Kind of regretting upgrading to ios5... my CKK for my sd card no longer brings the pictures into the Ipad 2 ..It just gets a camera  Show on the top but no piks coming across or showing to import into the IPAD...I thought that the Sd card was shot or the CKK had dirt on the connectors...
Also no more lyrics show in the Music App....

Similar Messages

  • I have a avchd file approx 15min in lenght on a sdhc card. My camera says there is one file. When I put the card in the PC ( Win8.1), the PC says there are 2 files,

    I have a avchd file approx 15min in length on a sdhc card. My camera says there is one file. When I put the card in the PC ( Win8.1), the PC says there are 2 files, one is 11mins approx and the other is 4mins long approx. If I bring these files into premier CS6 they are both identical length of 15mins What is going on here??

    Hi and thanks... kinda getting there but still unsure WTF. I have found that the files are split at 197gb (consistent with other uses on the web), however when I import them into premier cs6 they are 15mins and 29secs, on the SDHC card the file size is 197gbfor the larger, then the shorter one is 634mb. BUT when I import both files into premier cs6 they are identical size and length both are 15.29.19 or 15mins 29sec and 19frames. I have put the card in the camera and run that as an external and it sees the files as 2 split files while if I view the files straight off the camera there is only 1 file. Why it says there are 2 files of different sizes and premier imports them as 2 identical files is a mystery to me! I have also gone back and looked at some archived  footage on another card and yes there was one split file when the size exceeded 197gb but of course when I imported that footage nothing was missing because cs6 imported the file as a complete 'take' of the whole length

  • Hello, I was going to have my presentation on my macbook air. But when I putted it up on the big screen it wasn't a normal presentation. There was two pages at the time and a timer came up. How can I fix this as fast as posible? Thank's in advance.

    Hello, I was going to have my presentation on my MacBook Air. But when I putted it up on the big screen it wasn't a normal presentation. There was two pages at the time and a timer came up. How can I fix this as fast as posible? Thank's in advance.

    Your MacBook is using the big screen as the Presenter Display, and the MacBook Air display as the Show display. Tap the 'x' key to swap them during the show.
    Here is more information about using the Presenter Display.

  • I downloaded Magzter app button iPad 2 but when I buy magazines it is not getting downloaded but the same is getting downloaded in my iPod. Pl help. Magzter support is unable to help.

    I downloaded Magzter app button iPad 2 but when I buy magazines it is not getting downloaded but the same is getting downloaded in my iPod. Pl help. Magzter support is unable to help.

    You will not be able to see what version you are running until the iPad is activated. It will be in Settings>General>About >Version when you can get to the settings app.
    The slider bar that you are describing sounds like the screen lock side switch and that has no bearing on setting up the iPad or connecting to WiFi.
    Why don't you try rebooting your router? Unplug it for about 30 seconds and then plug it in again and see if the iPad will recognize and join the network.

  • HT1199 I have a desktop mac operating on Mac OSx 10.4.11 and the system does not recognize my iphone and I am unable to upgrade to the newest itunes version. What do I need to do?

    I have a desktop mac operating on Mac OSx 10.4.11 and the system does not recognize my iphone and I am unable to upgrade to the newest itunes version. What do I need to do?

    Backup first
    It is always best to have a full bootable backup before you upgrade. If you fail to do this you will be unable to return to this OS if you decide you don't like the new OS. Also there is a slight chance that an install could lose everything on the Mac. The backup must be to an external hard disk. Preferably use Carbon Copy Cloner to make a bootable backup of the whole disk.
    Erase before the install
    Once you have a bootable backup on an external disk it is best to erase the internal disk with the new installer DVD before you install.
    During the install
    Preferably do not import any data or preferences from earlier OSs during the install process as this can reintroduce bugs.
    OS numbers and names
    OS X 10.4.x - Tiger
    OS X 10.5.x - Leopard
    OS X 10.6.x - Snow Leopard
    OS X 10.7.x - Lion
    OS X 10.8.x - Mountain Lion
    More about Macs
    The Apple History site has specifications for every Mac ever produced: http://www.apple-history.com/
    Upgrade to Leopard
    Those wishing to upgrade to Leopard should be aware that install disks can be expensive unless you contact Apple. Details: http://lowendmac.com/deals/best-os-x-leopard-prices.html Standard Leopard installers impose several hardware limitations including speed and RAM size but all these restrictions can be overcome. Google for details. Leopard works well at 500 MHz with 1 GB of RAM and many happy users have less than this.
    Upgrade beyond Leopard
    OSs beyond OS X 10.5.8 require an Intel processor. If in doubt check this: Click the apple at the top left of your screen and select 'About this Mac'. This will give you your OS number. Then click 'More Info' to see which processor you have. If it says PowerPC you cannot upgrade to Snow Leopard and above. If you have an Intel Mac it is well worth upgrading to Snow Leopard now and then considering other options after that. You can buy Snow Leopard here: http://store.apple.com/us/product/MC573Z/A
    Upgrade beyond Snow Leopard
    Information about upgrading Snow Leopard to Lion or Mountain Lion: http://store.apple.com/us/product/MD256Z/A
    Important
    Check that your Mac complies with any requirements. If you are not in the US you should use the Change Country link at the bottom of Apple pages.

  • I have the apple usb stick to install lion but when I put it into the usb port it does not appear in finder?  How do I get access to it to install?

    I have the apple usb stick to install lion but when I put it into the usb port it does not appear in finder?  How do I get access to it to install?

    Try one of your other USB ports. Be sure to insert it with the plated fingers pointing upwards.

  • I have an iphone 3g which brought him use me when I brought it worked fine, I updated the system to 4.3.3 and no longer recognizes any network operator, look at the baseband and 5.16.02 and says it is it does not recognize anything I can do? the operator

    I have an iphone 3g which brought him use me when I brought it worked fine, I updated the system to 4.3.3 and no longer recognizes any network operator, look at the baseband and 5.16.02 and says it is it does not recognize anything I can do? the operator to buy my iphone was a 4 but it was stolen, I thought I could use this but aparentementeno, I can do to make it recognize my carrier? thanks

    Looks like you have relocked a hacked phone when you updated.  The only way to fix it would be if you could figure out the original carrier and see if they would unlock it.

  • How can I format an SD card on my mac?  I have tried the erase thing but when I put the card into my 35mm camera it says that the card has to be formatted.

    I just purchased two new SanDisk 8gb SD cards for my trail cameras.  When I put the cards into the trail cameras, the cameras will take pictures but it won't store them on the cards.  When I put the cards into my 35mm camera the camera tells me that the cards need to be formatted.  I have went through the steps in the disk utilities and erased the cards, which I assume is the same as formatting them??  I have tried this for hours and have had no luck getting these things to work at all.  It was awful disgusting when I checked my two trail cameras the first time and found out that they had taken close to 75 pictures but the cards were empty.  When I bought my 35mm camera several years ago, I bought a couple of Kodak SD cards and used them right out of the package and never had to do any of this formatting thing.  I don't understand what is going on and could sure use some help with this.  Thanks for any information anyone can give me with this problem.  I would love to have seen what animals set my cameras off 75 times in the last few days.  Thanks again.
    Respectully
    Jim

    AFAIK cameras offer their own built-in format utility for inserted SD cards.  You should use that.  Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly.  Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
    Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan.  I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole.

  • HT1688 camera on 4s , i have downloaded all pics and their is still 129 pics that the lap top does not recognize? how can i download these pics?

    i have just downloaded 407pics from my 4s. i turned off phone then turn on after 3-4 min. I looked at Camera to ensure that all pices were gone and their is still 129 photos and 29 videos ( no Album) . when i then plugged the Phone back in to download these pics the lap top does not recognize any pics left on the phone?
    Help!!!

    Your photos will not be touched, but your computer might recognize the photos again after that.
    copied from this article:
    A new one will be recreated the next time you sync Photos with your iPhone, iPad, or iPod. Deleting this folder will not remove the original images from your library.
    You can also try another way to import your photos:
    iOS: Importing personal photos and videos from iOS devices to your computer

  • HT1937 I have already unlock iphone4 from the apple website but when I install SIM card than no service display

    My brother send iPhone from USA to India
    iPhone 4 already unlocked from the apple website
    Not  using jailbreak system
    But when I install SIM card it displays no service
    What I have to do for this solution

    Gauravpatel00045 wrote:
    My brother send iPhone from USA to India
    iPhone 4 already unlocked from the apple website
    ONLY the Carrier that the Phone is locked to can Unlock it.
    Gauravpatel00045 wrote:
    ... when I install SIM card it displays no service
    What I have to do for this solution
    Please see the More Like This section on the right.

  • I thought I would be able to scan barcodes with my iPad 2 but it won't because it does not have an auto-focus camera. Can the camera be upgraded? can a peripheral cam be plugged in?

    I thought I would be able to scan bar codes with my iPad 2 but cannot because it only has a fixed-lens camera. Bar code scanning apps require auto-focus cameras. Can I upgrade the camera within the iPad2 to auto-focus? If not, can I add a peripheral auto-focus camera and plug it in the the usb port?

    Your not able to upgrade the  camera, it's not really there for photos . Also there is no USB port on the iPad just a cable that connects to you computer.

  • After downloading IOS 5.1.1 new iPad only shows connect to iTunes screen- computer does not recognize iPad now

    Against my better judgement, I let iTunes update my ipad with the 5.1.1 IOS.  After the download was complete, the iPad showed the Connect to Itunes screen and the device wasn't showing in my iTunes so I unplugged the USB.  Now the iPad is stuck on the Connect to iTunes screen.  I have tried doing the system restore trick, and that looks like it works when the Apple logo shows up, but right after that it goes back to the Connect to iTunes screen.  I tried just plugging it back into my computer and connecting it to iTunes but now neither iTunes nor my computer recognizes the device.  The iPad will not go to any other screen and will not even power off, just stays on the Connect to iTunes screen.  I live 300+ miles from the nearest Apple store so going in is not really an option.  I would appreciate any help that would keep me from throwing this thing against the wall. 

    Dear Diavonex,
    I have a similar issue, I tried doing the restore, but now the computer is unable to recognize the ipad. Itunes does not detect the ipad. The ipad works but not able to sync with the computer.
    Checking on the device manager of windows 7, it shows that there is an unknown device with no driver for it. How to get a driver for the same? Any suggestions?

  • I closed the address, search and other bars, ..all I have showing up top is the tabs bar, and right clicking anywhere up top does not give me the option of reopening these other bars. Help!

    sorry, meant to say that right clicking up top..everywhere I try..does NOT give me the option of reopening the address..and other...bars.

    If you press Ctrl+n to open a new window, does it have all the menus and toolbars?
    If you restart Firefox, does the display return to normal?
    If those don't work, you could try Firefox's Safe Mode. This will let you temporarily disable add-ons to work around any problem there.
    You might want to back up Firefox before using Safe Mode. For help with that, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
    Next, try starting Firefox in Firefox
    [http://support.mozilla.com/kb/Safe+Mode Safe Mode]. Be careful not to "reset" anything permanently if you didn't back up.
    Does that restore your menus and toolbars?

  • I have an old ipod shuffle and I cannot get it to sync because it does not show up in my devices list...? HELP!!!

    I cannot get my old ipod shuffle to sync because it does not show up in my devices list!!! I have tried letting it die and then plugging it in and still no success!! HELP!!!

    To sync via wifi you first have to connect to computer via USB and check the box in the Summary pane for the iPod in iTunes that sync via wifi.
    Note you can only sync with one computer. If you change syncing computers you have to restore the iPod on the second computer.

  • I have updated iphone 4 to iOS 6 now itunes 10.7 on windows 7 does not recognize it

    Hi I have updated iphone 4 to iOS 6 and also updated itunes to 10.7, now when I connect my device via usb it does not appear in itunes. I have followed all the advice in troubleshooter including uninstalling and reinstalling itunes but it still doesn't appear. Please can anyone help with this? I am not really very tech minded so a simple solution would help!! thankyou

    Thank you. I ended up performing the Restore after I did an Update, and performing the restore solved the problem----I now have a functioning iPhone with all of my data, pics, and apps on it. Fortunately I made sure that I backed up my iPhone before I tried to update to iOS6. Man, what a headache though, and it sounds like I had it easy compared to some other horror stories I've read. I won't update my iOS on my iPhone again; i've learned my lesson. It remains to be seen whether iOS6 will be worth it :-)

Maybe you are looking for