I have a Comcast system and am going through a Bose amp for sound. The comcast box has an HDMI port which I've used for the Apple TV connection. Nothing works! Help.
have a Comcast system and am going through a Bose amp for sound. The comcast box has an HDMI port which I've used for the Apple TV connection. Nothing works! Help.
Thanks. Thought that would be the solution but for my wall mounted TV it's going to be a problem but many thanks for your reply.....
Similar Messages
-
HI THERE,
CAN SOMEONE PLEASE HELP ME? I HAVE BEEN TRYING TO RESTORE MY IPHONE4 FROM IOS 4.3.3 TO 5.1.1 FOR THE LAST 6 HOURS AND EVERYTHING GOES THROUGH OK UNTIL IT GETS TO THE RESTORING IPHONE SOFTWARE, IT LOADS 1/2 THEN FREEZES. IVE LEFT IT LIKE THAT FOR AT 30MINS AND NOTHING HAPPENS. IVE TAKEN THE CORD OUT AND HAD TO TURN PHONE OFF AND RESTART, THEN LOAD IT BACK UP TO ITUNES ALL OVER AGAIN. MANY TIMES!!!!! IVE CHANGED CORD AND USB STILL NOTHING? IVE GOTTEN TO THE POINT WHERE I MAY HAVE RUINED IT ALTOGETHER AND NEED TO BUY A NEW PHONE? PLEASE I HOPE SOMEONE OUT THERE CAN HELP?:
MANY THANKSYou may not get a response as you are shouting at everyone.
All caps indicates shouting, is considered rude, and is difficult to read.
Many will not read such posts.
Try turning off you caps lock and asking again. -
I have a sony rx100 and my version of lightroom (4) will not recognize the raw (.ARW) files. Please help!
I have version 4.4.1 on my computer now, which is functioning properly - but does not read the .ARW files. When I download the link you sent and try to open it, it pops up as version 5 and I get this image (attached). This is my first time in one of these threads, not sure if i have to reply to each of you individually?
DdeGannes, could you please tell me how to recover the serial number from my operating system?
Thank you SO much everyone! -
My HD TV has two HDMI inputs which are being used by a home theater system and my RCN cable box. i want to be able to use my appleTV as well as those but do not have another HDMI input. How can i connect it so that i can use any 1 of the 3 at any time?
Get an HDMI switcher. Plug in the ATV directly to the TV and then use the switcher on the other input.
Example
http://www.amazon.com/Ultra-High-Performance-Switcher-Switch/dp/B0015YWKYY/ref=s r_1_1?ie=UTF8&qid=1316918064&sr=8-1 -
In a search I changed the Brazilan store to the Canadian store and now I cannot get back, and Bcause of that I cannot buy anythin at the apple Store. Can someone help me please?
Click here and follow the instructions to change the iTunes Store country.
(86100) -
I want to plug my Air into my TV. I have the latest HDMI adapter with sound. My TV has a HDMI port. Is there a setting in my Air that tells the computer to interface with my TV? I can't find it.
Apple menu>System Preferences>Sound>Output, make sure the TV is selected as the device
-
My iphone 4s crashed today and will not go back on. I see the apple logo, but nothing else will happen.
Hello jaicob1990,
Try the steps in the article below; it will give you multiple options on how to resolve the issue.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
i need my ipod but i have been up for hours looking up what to do and trying to fix it but i dont know waht to do it just gets stuck on the apple screen. PLEASE HELP!!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
We just purchased the Apple TV 2 and our TV doesn't have Hdmi port, but out cable box does. Can we hook it up to the cable box?
Is so, how we keep trying and nothing is happeningYou can't connect the Apple TV to the cable box either using HDMI or something else. The Apple TV is for use with HDMI only, although some users have found workarounds which may or may not work for you.
DVI
Some users with DVI have managed to get their TV's to work with DVI-HDMI cables. DVI carries no audio, so alternative connections need to be explored to enable audio. DVI doesn't necessarily support HDCP as well as other standards used by HDMI (which may or may not be an issue)
Analogue
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p (Apple TV 2), 720p/1080p (Apple TV 3)
DAC
DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances) -
I have tried loading 3 different cds that I recently purchased into Itunes. I click the import cd button and Itunes goes through the motion of copying and importing the cds, but the songs are not in my music library. I have searched everywhere to find where these cds might be, but to no avail. Could really use some help here. Never used to have this problem.
Are they in the relevant artist & album folders when you look via Windows Explorer. If so something may have gone wrong with the index of the Music playlist. Download the current iTunes Free Single of the Week. I know it sounds odd, but it should fix the problem.
If that doesn't work close iTunes and delete the hidden file sentinel from inside the main iTunes folder, then start iTunes again. It should run a consistency check when it starts up.
tt2 -
HI I HAVE AUTHORIZATION 5 SYSTEM AND NOW IM NOT HAVING THAT 5 SYSTEM NOW IM NOT ABALE TO AUTHORIZATION MY SYSTEM ITS SHOWING U HAVE AUTHORIZATION 5 SYSTEM AND I DON’T HAVE THAT 5 SYSTEM PLS CAN U HELP ME IN THIS IM NOT ABLE TO DOWNLODE ANY THING PLS DO THE NEED FULL
When you post again, don't do it in caps.
They are considered shouting and are much more difficult to read.
Allan -
I have One Sender system and two receivers system scenario. Pls help
Hello,
I have One Sender system and two receivers system scenario.
My sender is RFC (sync) in nature.
My one receiver is RFC (sync) in nature.
My second receiver is RFC (sync) in nature.
How to proceed with this.
If my second receiver is async then how to proceed with this.
RegardsHi Rick !
Depending on your requierements, you can create a BPM that
1) receives request from sender
2) sends request to receiver 1 / receives response from receiver 1
3) sends request to receiver 2 / receives response from receiver 2
4) do some processing with both responses
5) sends response to sender.
If your second receiver is async, just use an async send step in step 3. As far as I know, you cannot use multimapping with sync scenarios.
Regards,
Matias.
ps: please award points if helpful -
I have an iPod Touch and am going on a cruise where I have been told that Safari won't work on the ship so I need to download Firefox. My iPod said that Safari cna't download it from the Firefox website. I found "Mercury Web Browser" Firefox, in the app store (free) and am wondering if that is what I need? Help, I'm leaving on Sept. 3/12. Thanks.
- I never heard that but it may be true. It could be that for some reason Safari can't be used to log into the network. Once logged in, Safari should work fine
- However, I see nothing that say the Mercury Web Browser is Firefox. I would contact the cruise line and ask if and how you use the ship's['s wifi for an iPhone or iPad (it will apply to iPod touch) -
Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers! Everything is connected but I get an "idle" message in the queue. I have "Reset printer system" and re-added these printers. No luck. Help?
Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html -
Trying to update iphone to 5.0 and after going through the entire download, I get the message that "the Network Connection timed out". Check my network settings. Help!
I have been having this problem for many many months. I switched off my firewall and windows firewall and i am still having the same problems.
Apple store were not helpful in anyway and im at my wits end :-(
Any help welcome
Maybe you are looking for
-
STS does not work after update
Hi. We have problem with STS after update. SAPKA70022 - ABA Support Package 22 for 7.00 SAPKA70023 - ABA Support Package 23 for 7.00 SAPKB70022 - Basis Support Package 22 for 7.00 SAPKB70023 - Basis Support Package 23 for 7.00 SAPKW70024 - BW Support
-
Stuck in recovery following failed update
I've had a quick search of the forum and haven't seen my exact problem listed, apologies if it's been asked and answered. I've had the iPhone for about a month and regularly sync everything and back it up with itunes. I said yes to the iPhone update
-
Anyone else having trouble with iWork-documents in the cloud today? I cannot connect to the thru my iOS-devices, neither upload new from my mac.
-
I writing a motion detection script which works fine but there is a small amount of camera movement between frames and I need to automatically align the new frame with the old one to ensure the motion detection works well (the object I'm tracking is
-
Photo's does not support Olympus ORF raw files. At least not the latest M5 MkII camera raw files. Its a brand new program why is it not up to date with Oly raw files.