I have a compilation problem with my mini iPod that is preventing my volume from increasing. I can't get the compilation code, please help me
MY mini iPod version number1.1.3 pc robs iPod ,4GB is having volume limit problem ,the volume is very low compare to how it was playing before I mistakenly touch the combination code. I have forgotten the combination code, please help me out.. I have tried to reset settings but it wouldn't work.
i can get the combination code please
Similar Messages
-
Firstly, I can't open iPhoto on my macbook as of a few days and could it have anything to do with a problem I have updating my iPhone's software as I've downloaded extra iCloud storage but I still can't get the iPhone to recognise the space for software
No. With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you see when iPhoto opens?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
For the iPhone issue ask in the iPhone forum.
OT -
I have an MS word doc saved from a Macbook Pro on m flash drive. Now i want to print
th same doc from an IBM Compatible laptop. Problem is, I can't access the file. Please help.I suggest you post your question on Microsofts own forums for their Mac products as it's their software you're having issues with:
http://answers.microsoft.com/en-us/mac -
My big old IPod is stuff with an error stating Disk mode at top with a big check mark in middle of screen and an OK to disconnect at the bottom. Please help I have a lot of reggae music I can't lose.
Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-) -
if i have an Apple account with monay in it and i want to creat a new account can i transfer the money from the old account to the new account ?
If the money contains a completely unspent balance from an iTunes gift card, the iTunes Store staff can put that money back onto the card.
(89393) -
I have a new ipad and a iphone 5 which are under same Apple ID. I lso have a macbook that uses an older apple ID. How can I get the macbook to have same Apple ID as the other 2 devices
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
i have about 800 more songs on my nano than itunes, due to a crash. How can I get the songs onto itunes from the ipod, or at least get the new music ive gotten since the crash onto my ipod without deleting all the other songs when it syncs?
It has always been very basic to always maintain a backup copy of your computer for just such an occasion. Use your backup copy to put everything back.
If you have failed to bakup, then you can transfer itunes purchases from an ipod: File>Transfer Purchases -
How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your reply. Thanks!
It's good to read Antoniad's post. It reassures me that I can use my new iPad as an international communication device which is the reason I purchased the thing. However, I called Verizon today (my provider of cellular data) who told me that I can't just pop in a SIM card as you suggested. He also said that he was from the "Pre-Pay" division of Verizon and he was certain that I couldn't do what I planned to do. I was extremely disappointed as I had called Apple prior to buying the iPad and I read the algorhythm on the website for choosing an iPad before purchasing. Those sources were quite specific and the information seemed clear. I would be able to use my iPad to communicate through cellular connections while traveling on the road, literally, abroad. I was told that I could pop in a data card wherever I was, just as you indicated in your message above, and voila I was good to go. The Verizon rep definitively rained on that parade, but said that I might be able to do this if I have a "Post-Pay" account, a different area of Verizon. I haven't had the chance to talk to this division yet, so I looked to Apple's Support for answers. Maybe I will find out that I can use my iPad as an international communication device while traveling on the road afterall, however, it appears I may need a different type of account (Post-Pay), something I was never warned about. Can I switch to this kind of account? I don't know. I have to find out. If you have any information about this issue, it would be good to share since I strongly suspect there are others who bought the iPad for the same purpose that I have.
-
great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp 3.0.4.
Here's what I get:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:11:24:7d:e7:1e
media: autoselect (none) status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::211:24ff:fe28:2e71%en1 prefixlen 64 scopeid 0x5
inet 169.254.115.141 netmask 0xffff0000 broadcast 169.254.255.255
ether 00:11:24:28:2e:71
media: autoselect status: active
supported media: autoselect
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
lladdr 00:11:24:ff:fe:7d:e7:1e
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex> -
I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp text, it wont let me. Just sounds the ding, alert, can still slightly navigate the program but can not use any other tools after clicking warp text. I just have to open task manager and close the program. not sure if I'm doing something wrong or maybe I just need to uninstall and re install. Having trouble finding out how to uninstall and reinstall because the program came pre installed on my desktop.
It actually sounds like the warp text window is opening off screen.
Resetting the photoshop elements 10 preferences should fix it.
*Press and hold the Shift+Ctrl+Alt keys just after you start the launch of the photoshop elements 10 editor
*Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop elements setting file
*Press Yes -
I have a adobe account. I lost my original acrobat 7 standard driver cd. How can I get the replacement cd.
Hello,
you could use Download Acrobat 7 and CS2 products >>> by reading "Read before you download a CS2 product "
Hans-Günter -
I have the 10.7.4 and I cannot get the Flash Player ,, please help me.
If you downloaded it, it's likely in your Downloads folder as a Disk Image .dmg. Just open it and intall Flash player and restart your browser. Everything should work.
Clinton -
I have entered the wrong numbers to put my phone in pass code lock. However, I didn't set the autolock....how can I get the pass code lock reset?
Your only choice is to place the phone in DFU mode (search Google for instructions) and restore as a new device. You will lose all your data.
-
Hello I have a customer Close iPhone 5S any cloud symbol purchased the device from one of my colleagues and the activation message please help me
<Personal Information Edited by Host>It's a bad idea to post your IMEI number and I've asked the Hosts to remove it.
If the previous owner of the phone has set the Activation Lock in iCloud, only he can unlock it either by giving you the ID and password, or by removing it from his list of devices - details here:
http://support.apple.com/kb/TS4515
Without his unlocking it for you, you cannot use the phone. -
HELLO, I UNLOCKED MY 3GS PHONE THEN RESTORED IT TO FACTORY DEFAULTS THROUGH ITUNES THEN COULD NOT REACTIVATE THE IPHONE, I TRIED SEVERAL TIMES USING WIFI AND ITUNES, IT CAN NOT DETECT THE SIM, SOMEONE PLEASE HELP ME WITH FOLLOW UP, THANKS
sir as ur reply i guess that my phone has locked again as i restored to factory defaults, now if i try with a att active sim then can i activate the iphone ? and i think i need to unlock again if i want to use sim other then att right ? pls reply me in details asap
Maybe you are looking for
-
How to install windows 8 using bootcamp with no optical drive
Hi, I have a mac book pro 17" late 2011 with Mountain Lion installed. I have previously installed a windows 7 using bootcamp without an optical drive by creating an install disk as part of boot camp option. I still don't have an optical drive. The ot
-
Keyword FIND problem in CS3 Bridge (Windows XP Professional)
Select a large group of photos. File > File Info. In File Info dialogue box, enter Europe in the keyword field. Next, select a sub-group, add the keyword as above Italy. For another sub-group add the word France, and for a third sub-group add the wor
-
Read Before Posting - Where to find Business Objects Java SDK Resources
Before posting you should look through the various resources below for the answers to your questions. A lot of the "how to" or "where can I find" questions are already answered in the material below. Search the Forums Use the search feature in these
-
Beginning today my new bookmarks are not being saved. I read several KB articles and have tried: - making sure the bookmarks file is not read-only - reset browser.places in about:config - renamed the places.sqlite and places.sqlite-journal, and resta
-
Hi Experts, We are currently Using the SRM 4.0 with support pack 9 currently. Till I recieved the requests from business for creation of SRM user access, so I am creating the SU01 data and intergrating to the Organization structure using Users_Gen.