I have a Droid Ultra does anyone know of ear buds that have the inline mic with volume controls?
I am looking for ear buds that have an inline mic and volume controls...I have the Droid Ultra...can anyone recommend one?
Earbuds with Mic | urBeats | Beats by Dre
I use these and they are great. Read and see if this is what you were thinking of.
Good Luck
Similar Messages
-
I just bought an ipad3 and I was wondering if anyone knows how to have my reminders displayed in my calendar? If it not possible on the iPad , is it possible on the iphone4s? if not, than does anyone know of any apps that make it convenient to do so?
That's only for the iPhone 5. On the 4 and 4S, they can repair the back glass in store for $30. They will not replace the display on a 4 or 4S. They must replace the entire phone. Replacing the display on them requires disassembling the entire phone, which they will not do in store.
-
I have an iPhone 5 and if I make a call it goes blank hangs up on the people and then proceeds to facetime them automatically. Does anyone know how to fix this? It only started with ios7
Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Unfortunately, we may have to wait until Apple is more forthcoming with information.
http://www.apple.com/support/systemstatus/ -
I lost my old iphone and have a new 5s.. i need to sync to itunes. i had to donwload manually via tools but i didnt download all four files. now when i plug my phone into itunes it says there is an error bc i didnt download all the files. so when i go into itunes now and check for updates it says its up to date. the problem is with the phone support file i didnt download.
Does anyone know how to get back to the pop up that has the music player update and itunes update bc this is the only place i have seen "tools" to be able to manually update all four files....
***IF i completely uninstall itunes and reinstall will it still have all my songs, photos, apps etc... bc i need to sync my new phone to get all my stuff backthis is a follow up from the profane post earlier....
i have done this twice in two other posts..
here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me... -
Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?
I am acquiring images and data to a buffer on the edge of the while loop, and am finding that the crashing of the program is unpredictable, but almost always due to a memory saturation when the buffers gets too big.
I have attached the VI.
Thanks for the help
Attachments:
new_control_and_acquisition_program.vi 946 KBTake a look at this document that discusses how to monitor IMAQ memory usage:
http://digital.ni.com/public.nsf/websearch/8C6E405861C60DE786256DB400755957
Hope this helps -
Julie -
Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?
I am acquiring images and data to a buffer on the edge of the while loop, and am finding that the crashing of the program is unpredictable, but almost always due to a memory saturation when the buffers gets too big.
I have attached the VI.
Thanks for the help
Attachments:
new_control_and_acquisition_program.vi 946 KBgot these vi's off ni site a while ago - see if they help
Attachments:
Memory_Monitor.zip 132 KB -
Does anyone know if Numbers will work on the MacBook Air?
If you just downloaded "free" Numbers then yes you have the current version that runs on OS X v9.x
If you need a Mac data processor (not specifically Numbers) then Open Office.org, Neo Office.org both have spread sheet (aka "number like) apps included with them. They also are free. -
I am trying to view my pay stubs online but nothing happens when I click on the link. Does anyone know why, I never had a problem viewing them with my pc?
Nobody knows why because you have not provided sufficient information. Web site? Browser? How do you see your pay stubs online? Company web site? Unsecure?
-
I am a residential appraiser and recently purchased an ipad 4 to use for my home inspections. Some homes are foreclosed poperties without power and I am unable to get a good interior picture without a flash. Does anyone know of a flash attachment for the ipad 4? I found a flash attachment for the ipad 2, but it does not work with the ipad 4.
I'm sorry to hear that.
I'm not affiliated w/ the developer, just a happy user that gave up fighting the apple podcast app a while ago. I used to have a bunch of smart playlists in itunes for my podcasts, and come home every day and pathologically synced my phone as soon as I walked in the door, and again before I walked out the door in the morning.
Since my wife was doing this too, we were fighting over who's turn it was to sync their phone.
Since I've switched to Downcast, I no longer worry about syncing my phone to itunes at all. I can go weeks between syncs.
Setup a "playlist" in downcast (ex., "Commute") and add podcasts to that playlist. Add another playlist ("walk" or "workout") and add different podcasts to that one.
Set podcast priorities on a per-feed basis (ex., high priority for some daily news feeds, medium priority for some favorite podcasts, lower priority for other stuff). Downcast will play the things in the priority you specify, and within that priority, it will play in date order (oldest to newest).
Allegedly, it will also sync your play status to other devices, although that is not a feature I currently use and can't vouch for. It uses apple's iCloud APIs, so to some extent may be limited by what Apple's APIs can do. -
Does anyone know where to find printer profiles for Epson paper with MG6200 printer using Lightroom?
Does anyone know where to find printer profiles for Epson paper with MG6200 printer for use in LightRoom5?
Epsnm should provide recommended settings (I.e. Which Canon paper type to select). They may also have profiles on their site.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472 -
I am aware that the iPod Touch 5g has no official date yet, on the site it only says: Available to ship: October. But, does anyone know what a possible, date for the iPod to be released? :)
Well, I recently checked apple.com, and the "pre-order" button has been replaced with the "buy now" button. This is a very good sign that the iPods will begin to ship soon! There is still no exact date, but I expect that they will ship within the next 3 days. You should get an email when they have shipped.
Take care!
-59Ballons -
Hi, I've got an imac using mac os x version10.4.11, does anyone know of any printers that are compatible with this operating system version?
Yesterday I set up a Canon IP3600 to work on a PowerBook G4 running OS 10.4.11. It is a print-only unit. I got the 10.4 drivers off the Canon website before connecting the printer. Many Brother printers still have support for older Mac OS versions.
If you need a multi-function device, it is gettng very hard to find any that support PowerPC Macs (pre-2006) of OSX versions older then 10.6 any more.
As you posted in the PowerPC iMac forum I assume you have one. However, there are some Intel Macs (2006 and newer) still running 10.4. Check "About this Mac" under your Apple menu: if it says you have an Intel processor, you have many more doors open. -
when i'm editing my video in the timeline it looks perfect, but when i save the video and replay it on quicktime it has these weird lines? does anyone know how to fix that?
As Tom states, that's interlacing.
Interlacing was invented when the TV was born, to carry 1/5 the frame with each Hz of the electricity rating. In the US, that's why you use 30 fps (or 29.nnn) in the US and we use 25 fps in europe as the electricity is 60Hz/50Hz.
Interlaced video should ONLY (I repeat ONLY) be used for analog TV signal transports.
Each and every digital TV set today, including all the computer screens, is Progressive, updating the full frame at each screen refresh. And most TV's even refresh much quicker, newest TV's refresh a 800Hz..! (giving then problems with the newest LTE spectums..)
If your source media in interlaced, ask why! And stop shooting interlaced.. ;-)
If you have interlaced video, make sure you apply the DeInterlace setting when you import and transcode it. -
Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????
I believe you naeed the Apple ADC to DVI adapter.
-
The user profile my appleTV was synced on my computer to no longer works (corrupt). My Apple TV is still synced to that profile and all of my recent purchases are going to that username. Does anyone know how to get all of the purchased items back and to the new user (same computer)? I created a new user on my computer and moved the itunes folder to the desktop but never changed the path to which the apple synced to. Now I can only see old items I purchased before the user profile went bad. PLease help!
Welcome to the Apple Community.
Changing the library the Apple TV is synced with will delete all synced content from the Apple TV, but it won't delete purchased content.
You should be able to change the library, resync any content you want and transfer your purchases back to the new library.
Maybe you are looking for
-
Import option not working - please help
Hi I have MacBook Pro Retina 15 inch Early 2013. I use Motion (latest update 5.1.2) to convert my photo sequences to video files (time lapse). After importing first sequence I can export it with no problem. When I try to use Import option again nothi
-
Well foks, after much tribulation migrating from SL server to Lion Server I finally got ftp working (via terminal) using the instructions from this KB (http://support.apple.com/kb/HT4704). The problem with this is, connecting to the server via FTP on
-
Mobil Intel(r) 945 Chipset Family WDDM 1.0 Driver, Version 8.15.10.1749, Release Date: 5/6/2009
Greetings: I need the above legacy video driver for a pair of ThinkPad X60s. I need it because current versions of the driver won't support the Matrox DuelHead2Go multidsiplay device. Where can one go to find this legacy video driver? Your help i
-
Two files, same pantone color...Onscreen looks like two different colors?
Recently we have been having this issue at work, We have a line of packaging that uses the same pantone color (375 C). When we go to create a new document and use that same pantone the color onscreen looks more saturated then its predecessor. The onl
-
What's the FASTEST configuration?
I'm a new guy to the FCP 2 studio. I'm learning the ropes and the diffrerences from my old PC system. I can't seem to get good speed for rendering, all stuff, etc...especially compressor 3 processing (yuk!) ...an hour fto compress :30sec of Motion???