I have a friends ipod and he has some movies. I want the movies however I don't know how to pass them to my itunes.
I have a friends ipod and he has some movies. I want the movies however I don't know how to pass them to my itunes.
Awsome Files might work.
http://www.macroplant.com/awesomefiles/
Similar Messages
-
I purchased an album on iTunes - Magna Carta - On July 9th. The album is all grey in My Music and I cannot play anything. I have the reciept however I don't know how to address the issue.... I have since bought music and it downloaded fine.
Hey kaliapple,
Thanks for the question. First, you can try deleting and redownloading the purchase by following along with this:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
If that doesn't resolve the issue, then you can read how to report an issue with your purchase here:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
Regards,
David -
Hard to write is limited space. But tech support has two phones...and iPhone 5c and 5S, left by a former employee. Both are still tied to his itunes at email r********@yahoo.com. They don't the who the employee is. When they try to restore them to defaults, itunes tells them that the phone is linked to an itunes account. How can we get the phones wipes so that the company can reassign them. Assigning at least one of them to me?!!! (Coulld fit into 5c or 5s since there is one of each)
There are two levels of locking:
1. A 4-digit passcode that is entered to access the iPhone. This can be removed by connecting to a computer running iTunes by way of the recovery mode as described in http://support.apple.com/kb/HT1212 this simply erases the content and settings so it is accessible.
2. Find My Phone has been turned on in Settings > iCloud using the owners Apple ID and password. This sets the Activation Lock and cannot be bypassed. the owner's Apple ID and password must be entered to release the lock, or, the owner must login to his/her iCloud account, go to Find My Phone, and remove the iPhone from the devices list. After that is done the iPhone can be erased and restored.
Your situation sounds like number 2...the previous employee has installed an Apple ID and password and set the Activation Lock. Your IT folks will not be able to bypass that. At his point, the best hope is to take the iPhone to an Apple store genius bar with company proof of ownership, and see if they can help you. -
Vista system crashed due to a corrupted system file. The C drive was reformatted, and windows reloaded, along with the rest of my programs.
Before the drive was reformatted, an image was made of it on a USB drive to save all the data. Now I need to know how to get the Bookmarks back for Firefox, and the Address Book back for Thunderbird.
ThanksThanks for the quick response. It worked very well, for both Firefox and Tbird.
One hitch, until I remembered: those are all hidden files, in hidden folders. I had a devil of a time finding the "roaming" folder, until I found out how to unhide everything. In years past, I used DOS for that kind of thing. Explorer is much less user-friendly. Now that I know how to do it, it's simple.
Thanks again for the guidance -
Let me describe you the program I have to write:
I have to send 102 bit serialy using one of the data line of the LPT port to a device and be able to read back data sent from a device register throug one one of the input port pin for instance pin 10 of a DB25, and synchronize the transmission by the PC clock(for write and read). If fact I am using 5 output control(D0...D4) signal from the LPT port, RST, TXD, CLK, CE,TEST, one input data RXD (pin10)
So the program should work in normal mode (write data, read data), and test mode (use the write p
rocedure). Since I am quite new in Labview I am little lost and I need some support or exemple that use a way to send more than 32 bit via one data line(in my case 102bit= 8 bit COMMAD(MSB)+88 bit SPI DATA+6 bits CRC(LSB)) and be able to read them back, place them in the register and be able either to monitor or modify them.
I know that there are plenty of exemple but if I can gain time by being helped it would be great.
Can you please advise?Hi Beni,
find attached a SPI.vi - minor changed from one of
my typical SPI's (LabVIEW 7.1). With some simple changes it will fit to your application.
The only thing you need to do - prepare
the bits for the input-array.
If you need some more comments - find one of my email
adresses in documentation of this vi.
Regards
Werner
Attachments:
102bit_SPI.zip 90 KB -
I think I said it all in the header! Help.
What is your dock set for? Apple Menu > Dock
Pete -
I recently downloaded Ios 7 and all the songs that i have purchased before, but deleted off my itunes because i didn't want them, showed up. I don't know how to delete them off my ipod and i really don't want them there. Is there a way to get them off? The songs dont show up in my itunes on my computer, just on my ipod with a download button next to them. I don't want them there anymore because i don't like that kind of music anymore and i don't know how to get them to go away.
There is a similar setting for Videos on that Settings screen, so if you leave that 'on' you may have similar happening in the Videos app
-
i have kids ipods and my iphone but i dont want the same apps to go o these product how can i do this/
Also, if you sync to the same computer/iTunes library use the manual method so only checked items sync to the device
Managing content manually on iPhone, iPad, and iPod -
In updating my iPod to 6.1.2, I received an error during the update. Now, my ipod is not rebooting. It continues to display a screen showing usb to Itunes picture. Turning off and back on, it goes back to this picture. I don't know how to reset so that I can restore from my backup.
A similar thing happened when I updated the ios on my ipad. But, I was able to reboot, and then restore from backup. How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Sigh.....really late and I want to go to sleep, but I just purchased some Itunes online for the first time, and I don't know how to download them to my ipod. I've never done it before, and it shouldn't be rocket science, but I can't find anything that tells me where to go to download my songs. It said something about check purchases, but I can't even find that screen. I connected my ipod to the computer, and now it says CONNECTED...EJECT BEFORE DISCONNECTING. My BF set up the acct when he bought my ipod as a gift, and as I bought these songs for a special weekend I have planned I can't ask him how to do it. HELP! For some reason the password I always use is not recognized for my account... and since I can't get anyone from itunes without a proper log-in I'm at the mercy of all of you more versed in tech and itunes than I. Is anyone still up that can help me out?
It should keep asking for the password, because it's trying to check for purchases... As soon as you login, it will see you have pending downloads and create the downloads section on the left below Purchases under the Store section. Then it will start the music downloads there, as they will be listed one below the other.
You could just try to check your account balance or view your account and that will trigger a password request too. You can just click on that and say that now iTunes keeps asking for the password and ask him to help you with that. Trick would be to interrupt him so that he carries on with another task after, so he doesn't notice the download. Or you carry on with email or browsing which you were "busy" with when iTunes interrupted you for the password (stupid iTunes) -
I right clicked my iPod on iTunes and clicked restore from back up because i thought it would undo my IOS6 update. IT DELETED ALL MY PICTURES (2,000) AND I DON'T KNOW HOW TO GET THEM BACK!!!! Please help me!!!!!
Well, if you have not backed them up, they are gone.
Next time, when you have important material in only one place, back it up. -
My phone has no more storage but it says i have 5gb on icloud but i don't know how to use them.
iCloud storage doesn't affect the available storage on your device. It's for backing up your device and syncing your data, so you can recover the data if needed.
You probably need to import photos/videos to your computer or another destination (like a photo kiosk & burn CDs), and then delete them from your device. Or, delete some unused apps from your device. -
I use dial-up, FireFox 5.0, Yahoo addition 1.8. My screen load times have slowed down to a crawl. I have to wait and wait for a page to load. (I know --dial -up) It used to be much faster a month ago before 5.0. Is it FireFox or do I look to Yahoo for the problem? I don't know how to sort it out. Using Vista
I'm having the same problem. Dreamweaver is supper slow. Uploading and downloads from the server... any server I use two different servers. It times out all the time. Menus are slow too.
I'm on a MAC Pro, 6 gigs of ram no issues with anything else. I have talked to Apple they have checked everything for me. They say it's Dreamweaver. I've noticed the Dreamweaver is talking to the FTP even when I'm not doing anything.
I've tried cleaning out my MAC caches, turning off file check and check out. Still really slow. I've worked with Dreamweaver for 6 years never any issues like this before. 18 seconds to upload a 4 kb file. 11 seconds to download the same file. -
Can someone please help. I have a really old MacBook that is running really slow. I want to wipe everything and reinstall the latest software but don't know how to do this. Also is there a way of keeping Microsoft Office when doing this? Thanks in advance
You do realise that wiping the disk means that everything on the disk is erased. Everything. Photos, music, emails, ...
So the first piece of advice is to make sure you have a back up of everything.
You need the OS disk to reintsall the operating system. You will use that disk first to erase the drive, then to reinstall the OS.
Here's the link for the US. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
As for MS Office, you will need the original disk that it came on to reinstall it. -
My computer sees the auto duplexer on my Epson Stylus PX720WD but iworks says it is not installed. I have contacted Epson and I have the impression that they don't know how to solve this problem. Anyone got any ideas?
If you print to PDF first, and then print it from Preview does it work?
Maybe you are looking for
-
NEED HELP ON QUERRY (Search with SAF/TREX)
Hello Gurus, I have to work on standard screen in that they are fetching database and extracting the data by using CL_CRM_EI_IIA_QUERY_UI class. In this calss they are using SET_QUERY, GET_QUERY, GET_TEXT_QUERY, SET_TEXT_QUERY,CREATE_TEXT_EDITOR meth
-
Hello, I just completed a nice little project making use of the FLVPlayback features of Flash 8. I imported video files and encoded them to .flv files and stream them from a server. Works great. However, I just learned that some of my customers run L
-
HI Gurus, 0FIGL_O02 : General Ledger: Line Items 0FIAP_O03 : FIAP: Line item 0FIGL_O02 having fields:- Company code, fiscal year, Document No., Profit Centor 100, 05, 10001, un01 100,
-
Cannot add users to Calendar Server
Cannot add users to Calendar Server <P> You may get the following error when you try to add users to a new installation of Calendar Server 3.0: <P> Could not bind as [nsCalXItemId=10000:00001, o=Ace Industry,c=US].<br> Create ObjectClass for user [cn
-
Hi Any one please help me to use lock option in javascript i want to lock selected objects Thank APPU