I have a iMac I recently loaded Mavericks and Safari is very buggy.  My MacBook pro has been doing great.  Anyone else having issues with safari?

Safari just hangs up and has to be restarted.  My Macbook Pro has been doing great.  Just iMac.

Log into your Guest user and test Safari.

Similar Messages

  • TS1702 Is anyone else having issues with the most recent Facebook update? I updated it yesterday and now it won't open. I have uninstalled and reinstalled the app, but it still fails to open! Any suggestions?

    Is anyone else having issues with the most recent Facebook app update? I updated it on my iPad 2 yesterday, now it will not open app at all. I have restarted iPad, uninstalled app and reinstalled, several times and still it will not work! Any suggestions? I have also closed the append still no results!

    I just started having this yesterday.  It's only happened twice, but it's annoying.  My wife texted me that she was coming home last night, and it showed up immediately on my iPod Touch but not my iPhone. I opened my iPhone and it soon updated.  Worked fine after that.  Then just a moment ago today my wife texted me and the same thing happened.  I heard my iMac and iPod Touch receive the message but it didn't display on my phone until I opened the phone and it showed up again a little bit thereafter.  I suppose I'll send Apple some feedback on this issue.

  • Anyone else having issues with iMac built-in microphone?

    My mom's brand new 24" iMac (running the latest version of Leopard) keeps having issues with the built-in microphone going dead. It can be resurrected with a restart and PRAM reset (command-option-P-R), but it is kind of annoying to have to do this every time she wants to Skype or iChat. Any ideas what might be causing this? She runs a fairly clean system with few peripherals or third-party software (except occasionally an external FW drive for backups, a Blu-Ray burner [not connected at the same time], and Toast). Thanks.

    Even on restart with nothing else running, she can go into the System Preferences/Sound/Input and try testing the microphone and it is DOA. We did go through all of the prefs in Skype and they are all set right, she does try the Sound Test call in Skype to see if her audio is working and that is usually the indication that something is not right. Her broadband connection varies too much to have iChat work reliably if at all. She will be installing Snow Leopard soon, and I read that iChat only requires 300kbps bandwidth as opposed to 900kbps under Leopard so there is a possibility that there will be an alternative to Skype in the near future.
    All her updates are installed. Repairing permissions was done less than a month ago, but it is worth a try again. Also will have her fire up Activity Monitor to see if there is anything else taxing the CPU. I am 2000 miles away so it is sometimes hard to maintain this machine properly from a distance.
    Thanks for your input in trying to solve this mystery. BTW what do you think of using an external dedicated microphone? Kind of defeats the purpose/beauty of having it built-in with the iMac...

  • I'm having issues with Safari and Mavericks. It encounters errors frequently and cannot attach docs to my web e-mail without redundant steps. Any solution ideas?

    When using my web e-mail (Outlook web app) Safari frequently closes the page and says it must reload the page...then it errors-out. When this happens I must close Safari completely then reopen it, and reopen Outlook web app. My cache is cleared frequently (at least once per day). I am also unable to directly attach docs to e-mails - I must go the through the process twice. This never occured before Mavericks.
    Any ideas on a solution...anyone else experience issues with Safari/Mavericks operations?

    Hello Cabamyk,
    It sounds like you are having issues loading this web app for Outlook. I was thinking that there may be a 3rd party add-ons interfering with Safari or perhaps one may need to ge re installed. Use this article to help troubleshoot add-ons:
    Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    http://support.apple.com/kb/ts3230
    Use the add-on's uninstaller, if possible
    Quit Safari.
    Remove any unsupported third-party add-ons you've installed (see if the add-on's installer includes an uninstall feature).
    Open Safari again.
    If these steps fix the issue you were having, check the website of the software's developer to see if there is an updated version available, or avoid using the add-on.Manually uninstall third-party add-onsIf the software doesn't have an uninstall feature, quit Safari and try manually moving the third-party add-on files. These files are usually installed in one or more of the following locations:
    /Library/Internet Plug-Ins/
    /Library/Input Methods/
    /Library/InputManagers/
    /Library/ScriptingAdditions
    ~/Library/Internet Plug-Ins/
    ~/Library/Input Methods/
    ~/Library/InputManagers/
    ~/Library/ScriptingAdditions
    The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
    To access the Home folder in OS X Lion, OS X Mountain Lion, or OS X Mavericks, open the Finder, hold the Option key, and choose Go > Library.
    To access the Home folder in Mac OS X v10.6 and earlier, open the Finder and choose Go > Home. Then, click the Library folder.
    If the issue is resolved by removing items from the above locations to a different location, return the items one at a time and test Safari. That way you can determine which item is causing the issue. Once identified, remove the problematic item and put the others back. Check for updates to the items that are found to cause issues, or report the issue to the add-on developer.Important: When removing items from the above locations, do not put them in the Trash. Instead, put them in a new folder or on the desktop while troubleshooting. If removing the item does not resolve the issue, you can put it back where it came from. In Mac OS X v10.6 or later, you can use the Put Back feature of the Trash to automatically put items back where they came from.Files that should not be removedThe following items should not be deleted from your system:
    /Library/Internet Plug-Ins/iPhotoPhotocast.plugin
    /Library/Internet Plug-Ins/nsIQTScriptablePlugin.xpt
    /Library/Internet Plug-Ins/Quartz Composer.webplugin
    /Library/Internet Plug-Ins/QuickTime Plugin.plugin
    /Library/Internet Plug-Ins/QuickTime Plugin.webplugin (Mac OS X v10.5.x only)
    /Library/Internet Plug-Ins/VerifiedDownloadPlugin.plugin (Mac OS X v10.5.x only)
    Reinstalling the above plug-ins requires reinstalling OS X. Some application or system updates may restore specific plug-ins.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Since installing OS X Mavericks photoshop runs so slow I can hardly use it....anyone else having this problem?

    since installing OS X Mavericks photoshop (CS6) runs so slow I can hardly use it.  Is anyone else having this problem?

    The post above is only partially true. There are many people that have install Mavericks over the top of a older version of OS X and haven't experiences any problem. Then of course there are others that have experiences many different problems.
    Do you have a Time Machine backup from before you installed Mavericks? If you do, and you should, you can restore your system from that TM backup and then do a clean install of Mavericks on either an external drive or a second partition on your internal drive then use the Setup assistant system to copy over your setting files and apps from your older OS X version. You can then TEST that clean Mavericks install for any compatibilty problem before you commit to it totally.

  • My apples messages is crashing?  it just started, and i have updated my macbook, but still.... anyone else having this issue??

    my apples messages is crashing?  it just started, and i have updated my macbook, but still.... anyone else having this issue??

    Hi,
    Go to the  Applications folder.
    Highlight Messages
    Do a Get Info  (See File Menu for Keystrokes)
    Change it from Opening in 32Bit mode to an unticked box (64bit mode)
    Restart Messages
    9:02 PM      Tuesday; March 13, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Anyone else having trouble with Itunes store? My account says I have entered the wrong security code for my credit card

    Anyone else having trouble with Itunes store? My account says I have entered the wrong security code for my credit card

    Yes, it happens to me all the time. I deleted an app because it froze the. Tried to redownloading it but it wouldn't let me ivd tried all of my cards and nothing works. I thought it was because I had a negative balance but I have a to of money all accounts. It'd be very helpful if someone could help us out.

  • I have a new ipad has been doing great..today it has message that I have not backed up for 2 wks.. backup happens when plugged in (done) locked (done) and connected to wifi.(wireless) it will not respond to touching ok or any other touching..what have i d

    I have a new ipad and it has been doing great and I love it.
    today I have a message reading icloud backup...this ipad hasnt been backed up for 2 wks...backups happen when this ipad is plugged in (done) locked (done)
    and connected to wifi (I assume this is also done as it is wireless)
    the ok will not respond to touch nor the unlock...  it is charged to 86%
    What have I done????? Dahhhh

    Perform a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Has anyone else had issues with their Mac running slowly after installing Mavericks?

    Ever since I installed Mavericks, my MacBook is running waaaaay slower. One of my favorite things about Macs has always been how fast they boot up, but ever since Mavericks, mine takes forever. A lot of programs like GarageBand and Premiere Pro are also running really slowly. They used to work great. Anyone else having this same issue?

    The first thing to do is ensure you have adequate backups, because what you describe can be a symptom of impending disk failure.
    To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting. There are four separate parts to it; read everything first.
    Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
    When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
    Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Read about it here. It contains a link to download EtreCheck. Don't download it from anywhere else (such as may be found by following the results of an Internet search).
    Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
    It will take a moment to run as it collects its data.
    Copy and paste its output in a reply.
    Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
    EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
    When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
    After completing the above please determine if the problems also occur in "Safe Mode":
    Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
    You must disable FileVault before you can start your Mac in Safe Mode.
    Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
    Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
    To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
    System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.

  • Is anyone else having issues getting screensavers and the lock screen to work after installing Mavericks?

    I recently installed Mavericks and now my computer refuses to lock after sleep. Instead of a box that asks for a password to access the computer again, it just opens up back to where it was before sleep. In fact, I can't even get my screensaver to work. I have the screensaver set to one minute (to attempt to get it to work) and it wouldn't even come on. The sleep/lock screen is set to ask for password as soon as it's woken. Same goes for when I open my laptop after it's last use. No password, just instantly on. Is anyone else having this issue? If so, how can I fix it? Thanks!

    I had the exact same problem.. and thank you for the answer..
    It actually makes sense, but I had the 'bouncing camera' problem and never thought of the 'slide'..
    Dohhhhh
    cheers for the post

  • Anyone else having problems with Target display mode on Mavericks?

    Hi,
    Last week I upgraded my iMac and macmini to Mavericks.  I use target display mode to use the iMac display for the macmini.
    Since the upgrade I have suffered problems with winow resizing as I swap between computers.
    In particular I notice it with the Eclipse IDE window - since I am using the two systems for dual development projects.  But I don't believe the problem is limited to Eclipse,
    What happens is that when I switch (with fn-f2) the window appears to have disappered, but usually after bringing various apps to the front re-appears as long window with zero height (just the title bar).
    Am I alone in this?

    No - I'm having issues with my Macbook air -- working with Apple right now to figure it out. will let you know if I figure out a solution.

  • Is anyone else having difficulties with the Appstore not loading, iTunes store being unresponsive, and iTunes radio being down constantly today?

    My itunes store is having connectivity issues and my net connection is fine.  My appstore is also coming up blank rather frequently as well.  Also I have not been able to get my itunes radio to work - saying an internet connection problem - again not the issue.  Anyone else having these issues?

    It sure is...all three keep acting very wonky.  I'll be able to access the store from my macbook and then browse then not be able to connect.  Same goes for app store....
    As for itunes radio....seems a hot topic for everyone.

  • PLEASE HELP. I have Windows 7 on my laptop and I am using firefox 11. Firefox has been doing good since I downloaded it but not as of today.

    Firefox is running very slow and keep's saying not responding for 3 seconds and then does it again repeatedly. Please even when I type words and letters from firefox it types very slow and what I am typing has to catch up with the last thing I typed. It has been doing good ever since I downloaded it but now it sucks bad, not very happy with firefox now. I have windows 7 on my laptop and I have firefox 11....PLEASE HELP Thank you

    Another standard diagnostic step is to try Firefox's Safe Mode to see whether it is caused by a custom setting or add-on.
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, restart Firefox in [http://support.mozilla.org/kb/Safe+Mode Safe Mode] using
    Help > Restart with Add-ons Disabled
    In the Safe Mode dialog, do not check any boxes, just click "Continue in Safe Mode."
    Does Firefox behave any better?

  • I have had my macbook pro for 3 days, and it will not charge.  I tried several differnt outlets, tried cleaning and wiggling the magnet charger, still nothing.  Has this happened to anyone else? Any suggestions?

    Has this happened to anyone else?

    Jaybunni wrote:
    I have had my macbook pro for 3 days, and it will not charge.
    You have 14 days from the date of purchase to return your MBP.  Personally, I would not waste my time "troubleshooting" if the normal solutions do not work.
    Return the MBP for one that works before your 14 days are up and/or call AppleCare ASAP!!!
    Good luck!

  • My MacBook pro has been running slow lately. It's not much about the internet, I mean slow in loading things like apps and pictures. When I double click an image on my desktop it takes forever to load it up. Help?

    I would really like to get it back to how it was when I purchased it, every thing loaded up quickly. My friends have the same model as I and theirs run much faster than mine.

    First, back up all data immediately, as your boot drive might be failing.
    Step 1
    This diagnostic procedure will query the system log for messages that may indicate a hardware fault. It changes nothing, and therefore will not, in itself, solve your problem.
    If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|nspace-h|n Cause: -' | tail | open -ef
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
    Step 2
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
    Step 3
    When you notice the problem, launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 4
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Maybe you are looking for

  • Can I use one email address for two apple devices? (One iPad2 and one iMac.)

    I've been trying to find this information by searching the web and I can't find a good answer. Can I use [email protected] for my "iPad AppleID" and use the same email address for my "iMac AppleID"?

  • Can't delete IMG_0001.PNG

    Somewhere along the line, I hit the magic combination of buttons that takes a snapshot of the phone's screen as a .png file. However, when I tried to download this and some other pictures from the phone, both iPhoto and Image Capture claim that there

  • N8 Music Synchronization - how to clear all songs ...

    Background: I quickly synced a stack of songs from my N97 sync in Windows Media Player (Win 7).  Naturally the sync was way larger than the storage capacity on the N8. When I had more time, I went back and made a more conservative sized playlist and

  • How can i solve this replication problem between TT and ORACLE

    Hi I have an application that using AWT cashgroup implement the replication between TT (7.0.6.7) and ORACLE(10g); but i encounter this problem: 16:16:50.01 Err : REP: 2302682: ABM_BAL_WH:meta.c(4588): TT5259: Failed to store Awt runtime information f

  • Access/display BW Document in BEx Query

    Hello, I have a request to create a BEx query to access BW documents.  These BW documents are created in documents manager via WEB planning screens.  I can see in Analyzer where we have queries created to do this but I am unable to get any of these t