I have a iMac with a built in airport extreme card. Does the imac act as a wireless router so that I can connect to the internet from my iPad by tethering through my iMac?

Depends which iMac exactly and your network setup, you can go into System Preferences and under the Sharing pane you can enable internet sharing from ethernet (or whereever you get your internet from) to Wi-Fi.

Similar Messages

Can anyone recommend an external storage device to supplement my mac book air? I already have a time capsule but want the new device to replicate the data on that so ideally would like a device that i can connect to the time capsule through a cable.

Can anyone recommend an external storage device to supplement my mac book air? I already have a time capsule but want the new device to replicate the data on that so ideally would like a device that i can connect to the time capsule through a cable.

Hi CJR
I'm not sure how Time Capsule can be replicated onto your external drive but there is a USB port on the back of TC that can be hooked up to any recent external drive.
Another thing to think about , besides a Time Capsule failure, is the theft of your Time Capsule, so it might be a good idea to consider separating any redundant back-up from your Time Capsule or both my be stolen.
TC will back up until full and then begin deleting the oldest back-ups. Mine is a 2TB Time capsule.
My back-up plan is as follows:
1. Macbook Air back-up on Time Capsule though Time Machine backs up everything - I think it's about every 30 min or so.
2. Contacts, reminders, appointments, notes, email are backed up through iCloud.
3. iTunes and non-itunes purchased music is on iMatch (and no need to back-up) and any non-iTunes music is backed up on an HP external drive (in case Time Capsule dies)
4. Photos are on my MacBook Air and are backed up on my HP external drive.
5. Office documents (Excel, Powerpoint, Access etc) are stored in a Skydrive app (like iCloud) and Skydrive syncs these docuemnts with the MS cloud and my old PC and does not alter their native format like storing in iCloud would do.
Cheers

HT201441 i got iphone 5s from my uncle. he linked his account with the device. he gifted me the phone. unfortunately he's no longer :(. for that i can't activate the phone :(

i got iphone 5s from my uncle. he linked his account with the device. he gifted me the phone. unfortunately he's no longer :(. for that i can't activate the phone :(

Welcome to the Apple community.
Contact AppleCare (or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
I'm not exactly sure what procedures are in place for such events, but it may take a while and you may need to provide a death certificate and a note from the executor that the iPad has been willed to yourself.

Emails are "stuck" in my Apple Mail Outbox. I have deleted the account and reinstalled but still have the problem. Apple's "Network Diagnostics" report that it cannot connect to the SMPT server.

Emails are l "stuck" in my Apple Mail Outbox. I have deleted the account and reinstalled but still have the problem. Apple's "Network Diagnostics" report that it cannot connect to the SMPT server. TalkTalk (Tiscali) say there is no problem with their server because I have checked and can send emails with their webmail.

No that is not it:
Open Mail>Preferences>Accounts, the first page has this on it
If you click on the server name in the box (gmail in your case I assume) it opens and reveals this:
If you select Edit SMTP Server list you get this:
Post it here and, select the Advanced Tab (which looks like this)
Post this page as well.

We recently switched ISPs. To connect to the new ISP our Airport Extreme has to be in bridge mode. Now our Nintendo Wii won't connect to the Airport. Is it an issue with bridge mode that is causing this?

We recently switched ISPs. To connect to the new ISP our Airport Extreme has to be in bridge mode. Now our Nintendo Wii won't connect to the Airport. Is it an issue with bridge mode that is causing this? We're running two Macs wirelessly with no problems. And the Wii did connect before the switch.

Hello and thanks for the reply. I gave this a try, turned off Airport on one of the computers and tried the Wii again. Still no connection. I should say that we're also running an old G4 (wired) off the Airport as well, with no problems. I've tried many things to make the Wii to work, including power cycling the Airport, turning off the security settings in the Airport, resetting the Airport to it's default and redoing the network, resetting the network setting on the Wii (several times), moved the Airport closer to the Wii, all with no luck. The Wii "sees" the Airport but won't connect to it. I'm at a loss for anything else to try, so any help is appreciated.

Hi. I have a MacBook Pro with OS10.6.8 and cannot get net pages to load on my network at home. I can connect to the internet in work and on other networks. However, some other networks are now starting to fail. Can anyone suggets how I can fix it??

Hi. I have a MacBook Pro with OS10.6.8 and cannot get internet pages to load on my WiFi network at home. My iMac, iPhone and iPad all work on this network. It is connected to the net as dropbox registers a connection and so does skype. I can connect to the WiFi in work and on other networks when travelling. However, some other networks are now starting to fail. Can anyone suggets how I can fix it, as the MBP appears to be fine, its updated with all the latest versions of software and the WiFi network is also fine....just not with my MBP??

Hi. I have a MacBook Pro with OS10.6.8 and cannot get internet pages to load on my WiFi network at home. My iMac, iPhone and iPad all work on this network. It is connected to the net as dropbox registers a connection and so does skype. I can connect to the WiFi in work and on other networks when travelling. However, some other networks are now starting to fail. Can anyone suggets how I can fix it, as the MBP appears to be fine, its updated with all the latest versions of software and the WiFi network is also fine....just not with my MBP??

20-in Intel iMac (early 2006) Tiger -- configuring Airport Extreme Card

Hi -- I come from a mostly "not mac" background and am having difficulty diagnosing a slow internet connection -- and can't tell if I'm trying to use the right tool for the job. (I am using MAC OS X 10.4.11)
My home network uses a Linksys WRT54G wireless router and I've got 3 computers that connect using the router (including the iMac) -- the other two are Windows-based machines. We've got a 2-story house and I've been moving the router and computers around the house a bit trying to come up with the best configuration for a good wireless connection (I'm going to be ordering a supplemental antenna, but don't have it yet).
The two Windows machines (one using a relatively old PCI wireless card) get strong signals. I'm not even sure how strong a signal the iMac gets as I am not sure which utility allows me to see this. I do know that it has a painfully slow connection speed (at least web pages load at a crawl...).
I've got an Airport Extreme Card (0x14E4, 0x89). Firmware: Broadcom BCM43xx 1.0 (4.170.46.9).
I went to Apple's support downloads, and attempted to install firmware updates, but I am getting a message that indicates that these updates are not applicable to my card. I updated the Airport Utility software, but as far as I can tell that utility is looking for an Airport Extreme base that I don't have. Other than that I haven't seen any applicable information using that utility.
I was hoping to reach a configuration area that would allow me to specify 802.11b or g, and allow me to specify the channel -- but other than in the internet sharing section I don't see a place that allows me to do this. (I've currently got our home network on a 802.11g network on channel 8.) We're using WPA personal encryption -- which does appear to be recognized by the Airport Extreme card.
Am I missing something? I've got 3 "Airport" utilities but none of them seem to allow me to specifically configure the internal card. I've gone to "network" under System Preferences, and although I can see a "configure" button when I click on "Airport," it's pretty basic and doesn't allow me to set the channel or anything other than encryption & a password.
I would appreciate any help you can give me. Is this card so outdated that I should invest in a newer one? Am I limited by my outdated OS? (I hesistate to upgrade OS's when things are working -- in the Windows environment at least newer isn't always better...) Thanks. mcaren

Thank you Duane for your response.
I have only noticed a huge difference in the connection speeds of my iMac and our other computers in the last 6 mos. to a year. I did notice an improvement in speed when using a Rosewill USB wireless adapter -- I had a good wireless signal but would intermittently lose connectivity (and their user support was basically nil...).
I can't tell if I'm actually seeing an improvement in our other machines' connection (perhaps from the tweaking I'm able to do) or if in fact the iMac is slowing significantly. I think it's the latter. I've actually swapped out machines in the same position to see if location is at fault -- and I get no improvement in connection speed. I've had the iMac connected with ethernet to our router when possible because it has had such a slow wireless connection, but I needed to move the router recently and would like the iMac to stay in another room.
I've also read a lot about connection speed issues with Airport, but these reports are usually blamed on Leopard updates (there might be similar Tiger issues, but I don't read about them...).
Oh well. I'm hoping someone out there has some tricks up their sleeve as to how I can improve my wireless connection speed. Thanks for the help! mcaren

How can i transfer iphoto pictures from my ipad 1 to my new imac?

My old mac had a hard drive failure so i cant transfer the pictures from my old computer. I keep having the issue of the ipad not being registered with that libary, and i cannot register the ipad to that libary without erasing everything.

There are various apps that will recover photos from an iPad or iPod
http://www.macupdate.com/find/mac/iPad%20photo
The first two on this list, for example
Regards
TD

Help with a 3rd party airport extreme card

I have a G4 power mac running 10.3.9. I purchased the following 3rd party card on ebay:
- Truly Plug & Play - NO complicated software CD setup at all.
- Uses Airport Drivers built into MAC OS X
- Amazing 802.11g 54Mbps Wireless - Airport Extreme speed
- Range: 50' Indoors, 150' outdoors (maximum range in ideal conditions).
- Supports WPA (TKIP,AES),802.1x and standard 128/64-bit WEP Wireless Security
- Fully Compatible with: Apple Power Macintosh G3 (Blue & White), G4 Power Mac (all models except Cube) or G5 (tower, PCI model only) computers, with a spare PCI slot, running Mac OS X 10.2.6 with AirPort installer, or Mac OS X 10.3 Panther, 10.4 Tiger & 10.5 Leopard.
Installed the card in an open slot and Airport setup assistant does not find it. The lights on the card are dark and it just is not working. So far the seller has not responded to my emails. Does anyone have any ideas what I can do to get this thing running? Thanks

What model G4. You need to add this info to your Apple Discussions profile.
What is the make/model of the Airport card?
 Cheers, Tom

I have just changed my router and whilst I can connect to the router I can no longer air print on my hp 5524 which is also connecting to my router

I have just had to change my router, which has resulted in my i pad and HPphotosmart 5524 not connecting even though both devices are connecting well to the router. My laptop on windows prints on wi fi perfectly.
My previous router a 7 year old Netgear worked with the i pad but not this new Huawei HG532.
Is this the router or an Apple/HP issue. My network provider AOL/Talk Talk seem to want to point the finger towards the latter even though their old Netgear worked.
They are ringing me back this afternoon and I would like some advise to back up my problem.

You have to set the new SSID and Password on your printer to put printer and iPad on the same network. Run the CD again.
Setup a typical HP AirPrint Printer
1. Insert the CD into the CD drive of the computer, and then wait a few seconds for the software installer to start.
2. Accept the installation agreements, and then click Next . It might take several minutes for your computer to install the printer software.
3. You will be asked to connect printer to computer with USB cable
4. You will be ask how you want to connect to printer, select Network (Ethernet/Wireless) and then click Next.
5. Setup will access computer and router for wireless settings.
6. Setup will ask if you want to use wireless settings (SSID and Password) to setup printer. Select Yes and press Next.
7. Setup will then send wireless settings to printer.
8. Once printer is setup, you will be ask to remove USB cable.
9. The printer is now ready for AirPrint.

I'm trying to recover the network password for my Time Capsule so that I can connect another device (a PC) to it. I have my Macbook pro set to connect automatically and the password is hidden. How can I find out what it is.

My issue is that I'm trying to connect a PC to my wireless network run off of a Time capsule/airport router. My macbook pro connects fine but the network password is hidden and set to autoconnect. I thought I wrote the password down but when I try to connect the PC laptop and type in the timecapsule network PW is doesn't work. Trying to verify if the passwird I wrote down is correct but there doesn't seem to be a way to recover this.
Does anyone out there in the community know how to do this? (or do I just have to do a reset on the time capsule

Reset the TC.

Do you have experience that you can connect to the cRIO-9104 but cannot donwload the program to the RT engine and FPGA?

I can connect the cRIO-9104, I view it in MAX can it shows the cRIO-9104 is connected, but when I open the LabVIEW and want to download the program to the RT engine, it shows "Wait the RT egine to resopnse" and it shows fail to connect the cRIO-9104 later.
May you give me some guidelines on how to deal with it? Should I try rebooting the cRIO-9104 in the MAX?
Thank you!

Hi
With reference to MAX try to transfer a file from your pc to your controller. What appears as a tolerant program (MAX) might actually reveal that it isn't.
Also
If you don't update (F5) the Max menu then it recalls a previous set up!!
Regarding the wireless router, I suspect that MAX has a lower default baud rate than Labview, so downgrading LV to 9600bps could actually increase the range ( if required)
has the 9104 controller a RS232 connection? If so then run Hyper terminal and connect to the controller. Reseting the controller ( reset button) should then reboot the system , Hyper terminal program would then reveal what applications programs are loaded on the controller(9104)
Hope that helps
xseadog

I have an existing Apple Account but my brother and my parents are using it. Is there any way that i can transfer all the music purchases to a new apple account (once created, of course)

My parents and my brother are using my apple id. They are using my cloud and my money. I want to create a new Apple ID. But if i do, is there anyway to transfer purchases such as music to my apple device which will have a different Apple ID than the one i purchased them with. Please help
Thank you :)

No, all content that you download from the store is tied to the account that downloaded it, it can't be transferred to another account

IMac won't detect airport extreme card

i just bought an airport extreme card for my 1.25 GHz G4 iMac. i have installed the card in my computer, but for some reason my computer hasn't detected the card.
i read some suggestions in other discussions, and have tried almost everything. i have reset my PRAM and run the apple hardware test. the card still has not been detected. i have also installed the latest software update for airport. still nothing. someone also suggested resetting the PMU, but i read up on that and don't see how that would help with an airport extreme card.
i'm wondering if maybe i didn't do a good job of installing the card. it seems easy enough, but after i inserted the card and attached the antennae, the card felt sort of loose in the slot. i don't know if it's supposed to be a tight fit or not. i pushed the card in until it go any father, but i didn't want to push it too hard for fear of breaking something.
any suggestions?
thanks.
iMac G4 1.25 GHz Mac OS X (10.4.6)
iMac G4 Mac OS X (10.4.6)

i figured it out. my card wasn't pushed in all the way. DOH!

Airport extreme card not working with leopard / G5

I just upgraded my PowerMac to leopard (G5 dual 1.8, 3 gigs of ram, 250 GB HD). I bought it new in December 2004 from apple. Previously I had been using a USB adapter to connect to my wireless internet at home (Linksys WRT54G). This device does not support leopard so I got an airport extreme card from gainsaver.com.
The Airport extreme card is configured properly as far as I know but it will only connect to my network for about 5 seconds then it drops. The USB adapter worked perfectly in the same spot and my macbook right next to it works fine as well.
1. Could it be a bad Airport extreme card?
2. Is this a known issue? And possibly be resolved with the 10.5.2 update?
It is a fresh Leopard install with no updates as I can not connect it to the internet to get them. Any help would be very much appreciated.
Message was edited by: anthonylkelly

Hi, I have the same machine (4 ram slots?) have you got the connector for the aerial that connects to the motherboard attached to your airport card. Mine works a treat.

I have a iMac with a built in airport extreme card. Does the imac act as a wireless router so that I can connect to the internet from my iPad by tethering through my iMac?

Similar Messages

Maybe you are looking for