I have a iPhone 4S and a Cannon Printer with AirPrint. I have the printer and the iPhone both on the same network, however I still can't locate the printer on the phone. Works just fine with the laptop on the same network. Any suggestions?

ok no problem! all i did was 1) set up the mobile hotspot on my phone. 2) turn it and wifi on on the phone. 3) connect the laptop/desktop to the hotspot network. 4) insert setup disk for the printer and begin setup. 5) complete the setup "using a usb cord to temporarilly connect the computer and printer" 6) unplug usb cable and finish set up on the laptop/desktop. 7) give it a few minutes to show up on the AirPrint menu on the phone. 8) that should be it. I unplugged the printer and plugged it back in, made sure the laptop was totally turned off AND disconnected from the network, and did everything I could to try and make it not work. The printer I have is a Canon MG3122, it doesn't have a fancy screen or even a way to input a password or anything like that, so it just strores a default network that it will connect to. in order to change networks i would have to complete setup multiple times. Since I only plan to use it with AirPrint for my mobile business....the one network is just fine! Hope this helps!

Similar Messages

Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

Hey Guys!
I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
Can you help me? Please?!
Thanks Folks!

This must be a tough one, no suggestions at all.

Mini DisplayPort to VGA isn't working. It won't recognize any external monitor. It worked just fine with my older spring 2011 MacBook Pro running Snow Leopard, but now with my brand new 2012 MacBook Pro running Mountain Lion, it no longer works

I just bought a new MacBook Pro this summer and was all excited. But I'm very frustrated right now because I can't connect to any external monitors through VGA. My thunderbolt (DisplayPort Mini) to HDMI works just fine, but when I try with my other connector to go from Thunderbolt (DisplayPort Mini) to VGA, Nothing works. my screen goes blue and changes size like it recognized something but nothing is ever detected on the external moniter or projector. I'm not sure what is wrong but it's very frustrating. I'm just very depressed that it worked just fine with my 2-year-old MacBook Pro but isn't working now. I'm running OS X 10.8.2. I just upgraded yesterday from 10.8.1 but that upgrade did nothing to fix my problem. Can anyone help? Thanks

I am haveing this exact same issue. I have plugging in 3 monitors and tried two different VGA to mini displayport and nothing is working. I recently bought a Acer monitor and it work for an hour and now it back to doing the same thing.
When I plug the VGA adapter in to the monitor the monitor think its not connected to a computer then when disconnecting the VGA adapter the monitor thinks it is connected to a computer.
NEED SOME HELP!!! at the point of all my hair is pulled out.
^^^
that is the same problem i am having! if anyone can help that would be great i'm losing my mind over here

I can't print. When I go to file-print, nothing happens. My printer is working just fine with IE and everything else.

I can't print. When I go to file-print, nothing happens. My printer is working just fine with IE and everything else.

Try the Firefox SafeMode. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

I just installed mongolian cyrillic keyboard and it's working just fine with safari but i can't type on Word with it. please help me?

i just installed mongolian cyrillic keyboard and it's working just fine with safari but i can't type on Word with it. please help me?

PS Here is a source for a keyboard. Try it if you have not done so already
http://m10lmac.blogspot.com/2012/12/new-mongolian-keyboard-layout.html
For questions about why Word doesn't do something, try
http://answers.microsoft.com/en-us/mac/forum/macword

While in Lightroom, i press command e to edit in cs5, however my picture won't open in cs5. It was working just fine, then just stopped.

while in Lightroom, i press command e to edit in cs5, however my picture won't open in cs5. It was working just fine, then just stopped.

Please do not post questions more than once. It makes it difficult for you as well as those who will try to answer. I don't have an answer for you. However:
What operating system?
What version of Lightroom?
How much RAM?
Did you install anything new?
What version of Camera Raw are using in Photoshop CS5?
If you can provide more details, it might make it easier for someone to provide you with an answer.

TS3899 Our CEO has an iPhone and an iPad. Everytime he is at a specific airport (BWI) he is unable to send or recieve email over 4G or wifi. Everything else seems to work just fine over wifi or 4G LTE. Has anyone ever seen anything similar? is this malwar

Our CEO has an iPhone and an iPad. Everytime he is at the Baltimore Washington Airport (BWI) he is unable to send or recieve email over 4G or wifi. Everything else seems to work just fine over wifi or 4G LTE. Has anyone ever seen anything similar? is this malware?
Both devices are on Verizons 4G LTE network. Both devices do have some of the same APPS installed. Can this be a case of him connecting to a rogue wifi network of a hacker that may have installed malicious code on his devices when he connected? That would explain why only his devices have the same exact issue only at BWI airport.

Something similar I've experienced. I was once having to use a AT&T hotspot and the iPad simply refused to access my mail via the mail app. But if I used safari I could get it. So the internet was working, but my supposition is that something with the hotspot's firewall messes with mail exchange.
next time your boss is at BWI, do you guys have a web interface? (for example if I wanted to access my work mail I could get them to set it up via the mail app and exchange, or I could go to a certain web address and access my mail that way via safari)
He could try using safari and the web interface if you have it.
If it's something in the hotspot's firewall I doubt it's anything that can be changed.

Why can't I print a web page on my HP 1600 with FF4 but is works just fine with FF3?

For example a web page that shows a recipe. It won't print. I select print and nothing. Works just fine on Firefox 3

{Ctrl + P} or File > Print will bring up the "native print dialog" box.
Is your printer selected in the '''Printer - Name''' box at the top? Is '''Print to File''' selected in the mid-point on the right-side of that dialog? (should not be check-marked)

HT3235 MacBook Air is connected to an external monitor via Apple Mini DisplayPort to VGA Adapter. At one time it worked just fine, now when I plug the monitor into the Mac, the mac screen goes blue and nothing appears on the monitor.

This monitor works, on a PC. Could the connector be bad or the port on the Mac Air? Any ideas?

You have the display set in Extended Desktop mode with the MacBook as the main screen. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen.
You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to use the MacBook’s keyboard and trackpad to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.
If you can’t see your MacBook screen because it’s broken or the backlight is off use the F7 key to switch between Extended Desktop and Mirror Display.
(From the MacBook User Guide: F7 (video mode toggle key) Switch between dual-display mode (extending the desktop across the built-in display and an external display) and video-mirroring mode (presenting the same information on both displays).

While the computer works just fine on our wi-fi, the iPad often says "Cannot connect to the server." What is causing this?

We have wireless in the house that services a PC and the iPad. Even when the PC is doing just fine, the iPad often won't send e-mail and wont let Safari connect to the internet. It gives a message that says "Can't connect to the Server." Why is this happening and what is the quick fix? Thanks for any help you can provide.

Your wireless router might be a bit old and you might need a newer wireless router.
some wireless routers wont work very well with the iPad.
Lots of people get this problem and think that it is their iPad that is dodgy
but it might be your wireless router.
What type of wireless router do you have and how old is it?
Hope this helps!

Help! My new iphone 5 will not connect via bluetooth to my bose speaker. It was working just fine with my old iphone 4 and now nothing.

Hello, I just purchased the iphone 5 and wanted to use my bose speaker which connects via blue tooth. Well, it will not work. It was working fine with my iphone 4 and now it will not pick up a signal. Help!!!

Howdy Adrianatolman,
The following article details a number of steps that can help sort out issues with Bluetooth accessories.
iOS: Third-party Bluetooth headsets, headphones, and keyboards
http://support.apple.com/kb/HT1664
Cheers,
Allen

I cannot open Yahoo Mail in Firefox - It works just fine with all other browsers

When I try to open Yahoo Mail in Firefox, it times out.
This happens every single day.
Every once in awhile I get lucky and get in, but again, I have to deal with this issue every single day.
Yes, I've dumped the cookies and Cache
Yes, I've switched to No Proxy
Yes, I go through straight links and not bookmarks
Nothing helps.
Basically, if I want to get into Yahoo Mail, I have to open Google Chrome. Which has me thinking, if I have to open Google Chrome so often, why don't I just switch?
I'm a long time user of Firefox and would prefer to stick with it, but this is the kind of thing that will push me over to using Google Chrome.
Anyone have any other suggestions?

You can remove all data stored in Firefox from a specific domain via "Forget About This Site" in the right-click context menu of an history entry ("History > Show All History" or "View > Sidebar > History") or via the about:permissions page.
Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make sure to backup this data or make a note.
You can't recover from this 'forget' unless you have a backup of the involved files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I can't see anything on facebook when I am using Firefox. It works just fine with Chrome or IE.

This just started a couple of days ago. Now when I go to facebook in either the regular or secure modes none of the entries show.

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

In FireFox 9, loading secure web pages running on non-standard ports works just fine. In FireFox 10, those same pages do not load and a "The connection was reset" message is displayed.

How can this be fixed so functionality returns as per FF9 and below?
This occurs on any secured website running on a non-standard port, with FF10.

< X-Post from https://support.mozilla.org/en-US/questions/917315#answer-315144 >
I don't think this is restricted to Firefox. I've noted this behaviour with IE9, Firefox 10.0.2, Opera Mobile (on my phone) and Chrome(latest version) with my Linksys E3000 router (I access it from https://<IP>) and my 3ware RAID card management suite, 3DM2 (I access it from https://localhost:888 ).
Notably, the only thing amiss that I've been able to see in the certificates (I'm no expert) is that the one from Linksys has issue and expiry dates in 1969 and 1970 respectively. However, I don't think this is the cause since 3DM2 has proper looking issue dates and has the identical problem.
Coincidentally, I noticed this happening after a fresh reinstall of Windows 7 x64 with virtually nothing installed on it (FF, Office 2007), so I don't think it's something wrong with the other software on the machine.

My pc connects to my new Optus wireless router but my Macs don't. I keep getting the message "The network "Optus mini modem" requires a password. It doesn't accept the password that works just fine with the pcs. Any ideas how to fix?

Can anyone help

I would restore the iPod to factory defaults/new iPod on your computer and start over. It appears the iPod is associated with another account. Any media that came with the iPod does not belong to you and di not transfer with the iPod hardware.

I have a iPhone 4S and a Cannon Printer with AirPrint. I have the printer and the iPhone both on the same network, however I still can't locate the printer on the phone. Works just fine with the laptop on the same network. Any suggestions?

Similar Messages

Maybe you are looking for