I have a ipod touch 3rd gen that has been working fine until a week ago.  I usually charge it using a power adapter in the house or using a car power adaptor.  All of a sudden neither will charge my ipod.  It does charge is I connect to computer.

I have tried different cords.  Other Ipods charge fine.  I have rebooted the Ipod.  I don't know what else to do.

Hi,
Try resetting your iPod:  http://support.apple.com/kb/HT1430. 
If that doesn't work, try restoring it:  http://support.apple.com/kb/ht1414. 
If all else fails, you will have to place your iPod in Recovery Mode:  http://support.apple.com/kb/HT1808. 
Hope this helps! 
---likeabird---

Similar Messages

  • I have an ipod touch 4th Gen that everything was working perfectly. After the last update of iOs5, the battery have charge 20 minutes. Even after the correction of the iOS 5.0.1 the battery have the same 20 minutes. What I can do?

    Hi
    I have an ipod touch 4th Gen that everything was working perfectly. After the last update of iOs 5, the battery have charge 20 minutes. After the correction of the iOS 5.0.1 the battery have the same 20 minutes. What I can do? Thanks

    Same thing here. Try putting the brightness down all the way (its hard to see at first but you will get used to it) and one more thing is that close all you open apps. So to do that you have to click the home button twice (after you put your passcode in) and you will see some apps in the bottom. Hold it until there is a red - sign. click all of them so they go away. This does not delete your apps it just makes your ipod better.

  • I have and ipod touch 4th gen that has the white screen of death but my home button doesnt work. how do i reset it?

    i have and ipod touch 4th gen that has the white screen of death but my home button doesnt work. how do i reset it?

    Restore, if iTunes will let you.  Everything except the password will be restored.  Connect via cable to the computer that you use for sync.  Be forewarned that it takes a long time.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • How can i find my ipod touch 5th g that has been stole (it does have icloud but it says that it needs internet connection) i dont know what to do now plz help

    How can i find my ipod touch 5th g that has been stole (it does have icloud but it says that it needs internet connection) i dont know what to do now plz help

    What To Do If Your iDevice or Computer Is Lost Or Stolen
    If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T, Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. Lost or Stolen iPhone? Here’s What to do
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on MobileMe
      3. OS X Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
    Third-party solutions for computers:
      1. VUWER 1.5.4
      2. Sneaky ******* 0.2.0
      3. Undercover 4.7
      4. LoJack for Laptops Premium Mac
      5. STEM 2.1
      6. MacPhoneHome 3.5

  • I have a 5s which has been working fine until about a week ago when any calender event added to my phone will not sync with my enterprise server. Any calender event entered on my PC (enterprise) does show on my phone. Mail is working fine both ways,ideas?

    i have a 5s which has been working fine until about a week ago when any calender event added to my phone will not sync with my enterprise server. Any calender event entered on my PC (enterprise) does show on my phone. Mail is working fine both ways,ideas?Iphne 5s and enterprise

    See my reply to this message:
    https://discussions.apple.com/thread/2557520?start=15&tstart=0
    The problem is that the POP3 client is not issuing a DELE command to remove the email from the server.

  • I have a 2007 iMac connected via WiFi. It has been working fine until I turned it on after a recent vacation. Network preferences indicates that it is correctly connected to my WiFI system but the data input and output rate is virtually zero. I know that

    I have a 2007 iMac connected via WiFi. It has been working fine until I turned it on after a recent vacation. Network Preferences indicates that it is correctly connected to my WiFI system but the data input and output rate is virtually zero. I know that the WiFI signal is reaching the iMac since both my iPhone and iPad are working perfectly at that location. I have rebooted the router and the iMac to no avail. Any suggestions would be greatly appreciated. Thank you very much. Geoff

    Hi Geoff,
    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    10.4 instructions...
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

  • I received my new Iphone 6 last week, backed my iphone 5 and then restored my new handset.  It has been working fine until today when I deletec all my contacts from my old handset.  Contacts have gone from my new handset too, how do I get them back?

    I received my new iphone 6 last week, backed my iphone 5 and then restored my new handset.  It has been working fine until today when I deleted all my contacts from my old handset.  Contacts have gone from my new handset too, how do I get them back?  I don't think the back up was done using icloud as I keep getting the message "not enough memory"

    The point is not whether you used iTunes or iCloud to restore your new iPhone. It's whether you have Contacts turned on in Settings > ICloud. If you do on both your old iPhone and new iPhone then those devices are connected through iCloud. Deletions on one device are also made on the other.
    You may be able to restore your Contacts be using your old device backup to restore your new iPhone again. Make sure that you turn Off ICloud functionality on your old iPhone before you delete anything else from it.

  • HT203177 My backups using Time Machine to my Time Capsule worked fine until a week ago. Since then it gets stuck on "Preparing ...". I have left it preparing overnight and it doesn't get past this stage.  What else can I do? Bob

    My backups using Time Machine to my Time Capsule worked fine until a week ago. Since then it gets stuck on "Preparing ...". I have left it preparing overnight and it doesn't get past this stage.  What else can I do?

    Mavericks does really nasty stuff..
    Try manually mounting the sparsebundle and extract the files you want.
    Yet another Pondini reference. http://pondini.org/TM/15.html
    We have avoided Mavericks you see knowing that it would cause these kinds of issues..
    You never ever load a new OS without doing a disk image beforehand.. TM is not reliable enough or trustworthy to be depended on.
    If none of the above work..
    I would get a USB drive on the computer and install Mountain Lion or whatever OS you had before you unfortunately upgraded to Mavericks.. Then use TM from that decent installation but mount the sparsebundle and choose the backup from a date well before mavericks was installed.
    Once you have extracted the files.. or even done a full restore you might be able to extract the files you want.

  • I just opened my mail on icloud and all messages disappeared from the last year! I have one email left in my inbox which is the most recent. I moved to icloud 2 weeks ago and it has been working fine until now. How can I retrieve old messages? Thank you.

    i just opened my mail on icloud and all messages disappeared from the last year! I have one email left in my inbox which is the most recent. I moved to icloud 2 weeks ago and it has been working fine until now. How can I retrieve old messages? Thank you.

    I guess you could try but I don't believe Apple can help with activation lock issues.  They may, however, be able to determine if the Apple ID belongs to one of you and reset the password for you if you can prove your identity.
    You might want to try calling Apple by going to https://expresslane.apple.com; click 'More Products and Services, then 'Apple ID'.  In the next page select 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password'.  Perhaps they can help determine if it's your ID and reset the password for you (and they probably have more expertise in doing this than the Apple store).

  • I have a iPhone 4s, which has been working fine until now. Charge phone overnight and within 2 hours dead. Put it on charger and shows charging but that's it. Battery not showing any charge.

    I have a IPhone 4s, which has been working great until now. Don't know if has any thing to do with the latest updates. Charged it over night and then two hours later it was dead. Didn't even used it. Placed on charger and the charging icon shows but battery not.

    Hello, M_Bilal
    Welcome to the HP Forums.
    That you for provided such a detailed post with what you've already completed, for the issue with your battery. I will try to guide you further.
    I would like to provide you further documents for troubleshooting, but you've essentially completed what I have for this issue. The only step left, would be to test the battery.
    You can do this with another battery, or in another notebook. I know you mention another machine, but if you know someone who does or someone who has a compatible battery. This would test that. You could even see if a local computer shop could test it.
    The reason for this, is if the battery is the problem, it's much easier and more affordable replacement. Also, you mention it being new, might have warranty.
    The other possible cause to the issue you've touched on, that would be the system board. Testing the above, would just confirm if this is the problem or not. From there you could decide on what you'd like to do.
    I know, there really aren't many suggestions here, but I hope this can provide you with the next step.
    Let me know how things go, with the route you choose to troubleshoot.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • HT3204 When attempting to burn an audio cd, I get an error message that says-burning failed due to unknown error (4280)?  It has been working fine, until today...what does this mean??

    When attempting to burn an audio cd from my playlist, I get an error message that says, burn failed due to unknown error (4280).  It has been working fine for months...any solutions?

    I have the exact same problem.
    Been searching through this site to try and find an answer but still not come up with anything.
    The wierd thing is that a couple of days ago it was working fine, and suddenly overnight it's stopped working.
    The only solution i've found is that you need to have administrator rights as it says in the posts on the site below:
    http://www.emergingearth.com/itunes-7-cant-burn-cds/
    Noticed by the diagnostic in your post that you dont have admin rights like me so that mite be the problem. Not sure if this is the right solution though.
      Windows XP  

  • How do I reformat an IPod Touch for Windows that has been formatted for a Mac?  All instructions I have been able to find use ITunes or Device Manager to reformat.  My IPod is not being recognized by ITunes or in Device Manager.

    I have an IPod Touch that has been formatted for a Mac.  All instructions I have been able to find use ITunes or Device Manager to reformat the device for Windows.  This cannot be done if Windows doesn't recognize the device.  Is there another way to set the device back to the factory settings directly on the device without using ITunes?

    Ipod touch is not formatted one way or the other at all.
    Just sync it to the new computer using itunes.
    iPod touch User Guide (For iOS 5.1 Software)

  • My iPod shuffle 3rd Gen icon has been replaced by a generic drive icon

    I connected my iPod shuffle 3rd Gen up via iTunes today only to find that Lion was displaying a generic drive icon for it in place of the iPod shuffle icon. I've since tried restoring the iPod using iTunes, and re-starting my MacBook Pro but it's not fixed it. There doesn't seem to be a standard icon library in Lion and I can't find any discussions about this on the various Apple support pages. Any ideas how to get it back?

    You need to reinstall iWork from the original source or from backup. If you installed it from a DVD, the Mac App Store version isn't free.
    (72188)

  • I have an IPod touch 3rd gen that won't see any wifi connections.

    The wifi doesn't work at all. I tried everything besides restoring it to fix the problem and the back where the antenna is has been pushed in. It just loads like it's looking for wifi, but it doesn't find anything. Any ideas how to fix it? :/

    Likely that the wifi antenna got damaged or disconected. The iPod has to be fixed.
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. May not be wirh it for a 3G.
      Apple - iPod Repair price
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens         
    Fix it  yourself if you are up to it
      iPod Touch Repair – iFixit

  • My ipod touch 3rd gen. is messed up. I click on an app and 30 secs. later it kicks me back to the home screen. I can't use it unless I only want to listen to music.

    my ipod kicks back to home screen after 30 secs. I can't use any apps.

    - Try reetting the iPOd.  Nothing will be lost.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try downnloading/installing a new app.
    - Also see:
    iOS: Troubleshooting applications purchased from the App Store

Maybe you are looking for

  • How can I sort albums in a genre by release date in the itunes store

    How can I sort albums in a genre by release date in the itunes store

  • Dynamic Creation of a Database Using Coldfusion

    Here is what i want to do. Through the simple click of a button on want to dynamicly create a new databas e for a completely new user.   I have a database already designed but what i want is for that database to act as my "perfect database image"  th

  • Constant Download Errors & Content Deletion

    I have 2 problems that I've contacted Apple about many, many times without any resolution. They just keep treating me like a moron and then making me go through the same hoops that don't work. Can anyone help: 1. This is the most persistent. I get an

  • Passing dynamic table to function module

    Hi all, actully i have to pass dynamic internal table from function module. for that i use syntax move <dyn_table> to data_tab. but now my question is that in fm parameters what is the  type spec & associated type for data_tab in fm parameters. regar

  • Set Gradiant color for JTabbedPane

    Hi, can any one tell me how to set a gradient color to Jtabbedpane? Thanks in advance. Regards, Nandha.