I have a long numbers document, that I'd like to make more print friendly. It is a list of my DVD's that I just listed one after the other (1-200) when I tried to print it, it would be 18 pages, can I change it to be more like columns side by side to save

I have a long numbers document, that I'd like to make more print friendly.
It is a list of my DVD's that I just listed one after the other (1-200) when I tried to print it, it would be 18 pages,
can I change it to be more like columns side by side to save paper?

S,
I assume that you also have Pages on your computer (or some other capable WP program). I also assume that you have eliminated any unnecessary columns, so you have a 1-column table in Numbers.
When it comes time to print, Copy the entire Table: Click on the table name in the Sheets Pane and Command-C.
Switch to Pages, open a blank WP template and set the number of columns to 3 or so. With the Text Insertion Cursor flashing on the first line of the first column of the blank template, Command-V. Your table should paste into the Pages document as an Inline Object and will Wrap on the page as you desire. Then Print in Pages.
Jerry

Similar Messages

I bought Studio MX in 2006. I have the CD and the serial Num. but when I tried to reinstall it, it would not recognize the serial number. I registered the product in 06. Back then it was called macromedia.

I bought Studio MX in 2006. I have the CD and the serial Num. but when I tried to reinstall it, it would not recognize the serial number. I registered the product in 06. Back then it was called macromedia.

MX 2006 is so old it's no longer supported. See if this helps you.
Error: Unable to Activate | Macromedia products
Nancy O.

Why am I getting an error when I place two OAM files one after the other in different pages?

Why am I getting an error when I place two OAM files one after the other in different pages? They do not load or play correctly. They are both configured to play automatically with a .125 second delay and both have a white rectangle "poster" over for a hidden effect.

Thanks for the idea, Scott! I initially tried your idea, but my OAM files were still not loading correctly. I tried other combinations of OAM files, and it seems to work fine.
Back to my original OAM files: I made sure that my elements in my Edge Animate project had different names. I originally copied parts of some elements from one to another, and I think it was confusing to DPS to read it.

IPhone 5. Prior to the iPhone 5, I could listen to podcasts one after the other without doing anything. Now it will only play one podcast at a time, then I have to click on the next one. Not a great feature when driving. TIA, Sarah

iPhone 5. Prior to the iPhone 5, I could listen to podcasts one after the other without doing anything. Now it will only play one podcast at a time, then I have to click on the next one. Not a great feature when driving. TIA, Sarah

How do I get it to just play through all the podcasts that I've downloaded just like my 1st gen?
Group and order your podcasts to a playlist. Then play them from the playlist.

Have clips automatically plan continuously one after the other...

I have created a iDVD project. In this project I have 8 different clips that I want to have play one after the other without having to go back to the title and choose the next clip. Is there a way to have them play as in "Play All". Thank you in advance.
Jim K.

I assume you already have your petal design replicated with a Circle arrangement and the Align Angle option checked. You will also need to check 3D.
Go to Behaviors > Replicator and add the Sequence Replicator.
In Sequence Replicator: Add > Position. Dial down the Position pane and ramp up the Z parameter (you need to go up to at least 2400 to start behind the default camera view.) Set the Sequencing to From and the Unit Size to Object. Adjust the Spread to taste. You can change the direction of the sequence by going back into the Replicator inspector and selecting Build Style: Counter Clockwise from the dropdown menu.

How to have it keep playing podcasts one after the other, automatically?

This may be a stupid question... I have a bunch of podcasts on my iPod. I find that when listening (through the "Podcasts" menu on the iPod, not a separate playlist I made myself), when one is finished, it stops and I have to pick it up and ask it to start the next one. How do I get it to just keep going (one after the other)?
Mike

the fiend wrote:
I think the video iPod only ever plays one at a time.
I see. Thanks for the info! At least now I know I'm not just missing a simple menu setting somewhere.
Are you (by any chance) saying that you have a video iPod, not a Classic?
actually I have both I have a Classic in my car, and a video one for travel. Both have the same issue but since it turns out they handle this differently, I wanted to know if the workaround posted for the Classic might have a counterpart in the video one... Thanks again!
Mike

When I click on an email address, new tabs continues to pop up one after the other.

Hey...
When I like to copy and paste '''email addresses''' from excel, word or any other software, Firefox opens new tabs one after another, so many that you must Force Quit Firefox on my Mac computer for it to stop, and I don't know how to disable Firefox from doing that in the future. It doesn't stop-it continues on and on opening new tabs.

You get that problem if you select the Firefox program to handle a file if you get an "open with" dialog.
*https://support.mozilla.com/kb/Firefox+keeps+opening+many+tabs+or+windows

How can I set firefox to stack my tabs one after the other so that I do not have to move through tabs using the buttons at the ends

when I open multiple tabs which do not fit the tab strip I have to move through tabs using scroll buttons. is there any way way I can stack the tabs on each other or suggest me a add-on which can help me achieve this

You can consider to access the tabs via the list all tabs button.
You see the "List All Tabs" button in current Firefox versions if there are that many tabs open that you get the Tab bar scroll buttons appearing.
* Permanent List-all-tabs Button: https://addons.mozilla.org/firefox/addon/permanent-listalltabs/
The Custom Tab Width extension adds CSS rules to adjust the tab width settings as set by the browser.tabs.tabMinWidth and browser.tabs.tabMaxWidth prefs on the <b>about:config</b> page.
* Custom Tab Width: https://addons.mozilla.org/firefox/addon/custom-tab-width/
You can achieve the same with code in userChrome.css.
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the chrome folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#tabbrowser-tabs ~ #alltabs-button { visibility:visible!important; }
.tabbrowser-tab[fadein]:not([pinned]) { min-width: 100px !important; max-width: 250px !important; }
</nowiki></pre>

TS1702 Help! I can't download apps on to my iPhone 3gs - I have done all latest updates but still it won't download an app. Everytime I press to install then enter apple password it just reverts back to the app. I'm only trying to download free apps.

Please see title above

well, after about 10 minutes, iTunes decided to download iBooks again this time without error. I synced my iPhone and now it's there. Weird! Must have been a store glitch with that app for a bit.

When i try to open a site, i get several new pages open with 4 tabs apiece, 2 index of files pages and 2 server not found pages. i have had as many as 10 of these pop up one after the other. initial page loads but i have to close all the other pages.

i have an HP with mozilla 4 browser

Hi,
Thanks for the reply. I have tried this on another machine running the same version of Blackboard. It works fine.
Only difference is that the machine that has the JVM crash is running on Fujitsu PrimePower and the OS is Solaris 9 (but twigged for PrimePower).
The one where it runs and starts up successfully is running on SunFire (OS is Solaris 10).
I am wondering if there is a problem with the JVM loading required libraries because of the OS being different versions.
Any leads on this is welcomed. Thank you.
Regards,
Hon Peng
===================
On Fujitsu Primepower
SunOS 5.9 Generic_118558-33 sun4us sparc FJSV,GPUS
the Dependencies for libjvm.so are as follows:
===================
bash-2.05$ ldd -r libjvm.so
libsocket.so.1 => /usr/lib/libsocket.so.1
libsched.so.1 => /usr/lib/libsched.so.1
libdl.so.1 => /usr/lib/libdl.so.1
libCrun.so.1 => /usr/lib/libCrun.so.1
libm.so.1 => /usr/lib/libm.so.1
libthread.so.1 => /usr/lib/libthread.so.1
libc.so.1 => /usr/lib/libc.so.1
libnsl.so.1 => /usr/lib/libnsl.so.1
libmp.so.2 => /usr/lib/libmp.so.2
/usr/platform/FJSV,GPUS/lib/libc_psr.so.1
=====================================
On SunFire, Sun machine
SunOS 5.10 Generic_118833-36 sun4u sparc SUNW,Sun-Fire-280R
the dependencies are different for the libjvm.so:
=====================================
bash-2.05$ ldd -r libjvm.so
libsocket.so.1 => /lib/libsocket.so.1
libsched.so.1 => /usr/lib/libsched.so.1
libdl.so.1 => /lib/libdl.so.1
libCrun.so.1 => /usr/lib/libCrun.so.1
libm.so.1 => /lib/libm.so.1
libthread.so.1 => /lib/libthread.so.1
libc.so.1 => /lib/libc.so.1
libnsl.so.1 => /lib/libnsl.so.1
libmp.so.2 => /lib/libmp.so.2
libmd5.so.1 => /lib/libmd5.so.1
libscf.so.1 => /lib/libscf.so.1
libdoor.so.1 => /lib/libdoor.so.1
libuutil.so.1 => /lib/libuutil.so.1
/platform/SUNW,Sun-Fire-280R/lib/libc_psr.so.1
libm.so.2 => /lib/libm.so.2
/platform/SUNW,Sun-Fire-280R/lib/libmd5_psr.so.1

Have replicated elements fly in one after the other?

Being new to Motion 5, I managed to form a flower by having a vector image of 1 petal replicate around a circle.
Now, I want to have those petals fly in from behind the camera one by one and form that flower.
How to accomplish that?
M

I assume you already have your petal design replicated with a Circle arrangement and the Align Angle option checked. You will also need to check 3D.
Go to Behaviors > Replicator and add the Sequence Replicator.
In Sequence Replicator: Add > Position. Dial down the Position pane and ramp up the Z parameter (you need to go up to at least 2400 to start behind the default camera view.) Set the Sequencing to From and the Unit Size to Object. Adjust the Spread to taste. You can change the direction of the sequence by going back into the Replicator inspector and selecting Build Style: Counter Clockwise from the dropdown menu.

I'll ask this again. I'm running Yosemite, LR 4.4 everything was running fine and I'm not sure if this is connected but when I loaded the last security update from Apple I started getting the "no content" box when I tried to publish to LR (Facebook OK),

I'll ask this again. I'm running Yosemite, LR 4.4 everything was running fine and I'm not sure if this is connected but when I loaded the last security update from Apple I started getting the "no content" box when I tried to publish to Flickr (Facebook OK), now I can't get it to authorize, I loaded 3rd party JR plug in and still get can't authorize. Can anybody help? Basically LR is useless, it has been nothing but problems.

It would probably be better to continue your previous thread on the same question than to start a new one.

When I tried to print my boarding pass from Continental, all I received was a page of small letters and numbers.

When I tried to print my boarding pass from Continental, all I received was a page of small letters and numbers.

I see where you say a newer version fixed the printing bug, but when I try to check for updates, it tells me I have the newest version. Your posts concerning the small print questions are a month old. What do I do?

I typed in data into the highlighted text box, and then tried to print my form. However, when printed, the copy only showed a portion of my answer. Is there a way to expand Adobe Reader's highlighted text to show my full response, or should I make my re

I typed in data into the highlighted text box, and then tried to print my form. However, when printed, the copy only showed a portion of my answer. Is there a way to expand Adobe Reader's highlighted text to show my full response, or should I make my responses only as long as the highlighted portion allows?

While printing any pdf file it will print the visible text only. To overcome this, the form needs to be dynamic so that it expands in layout while entering more data. Usually dynamic forms are developed by Adobe LiveCycle Designer.
~Deepak

I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks

I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks

>SystemPreferences>Network>DNS

I have a long numbers document, that I'd like to make more print friendly. It is a list of my DVD's that I just listed one after the other (1-200) when I tried to print it, it would be 18 pages, can I change it to be more like columns side by side to save

Similar Messages

Maybe you are looking for