I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server
I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
Can anyone please advise what I am doing wrong?
Hi LowLuster
Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!!
Similar Messages
-
Ipod touch wont load past apple screen. I have tried resetting by holding home button and on/off but after it resets it still only loads to the apple screen. When I plug the device in It stays on the apple screen and itunes does not recognize it? I fear it may be stuck in some sort of reset loop which is stopping itunes from recognizing it. How do I go about the process of sending it in to apple if I cannot find a fix? Thank you in advance, it is greatly appreciated!!
- See if placing the iPod in Recovery mode will allow a restore.
- If not successful and you can't turn the iPod fully off (that is required to place in recovery mode), then let the battery fully drain. After charging for at least an hour try the reset, restore again
- Then time for an appointment at the Genius Bar of an Apples store. -
I am trying to finish a book in InDesign CS2 with another person. My old XP computer became unstable and I had to get a Windows 7 computer. I was able to install CS2 on the Virtual XP Machine on my Windows 7 computer, but I cannot register or activate it. Adobe no longer supports activation. Is there a way I can keep using CS2? I need to get files back and forth to my coauthor. I also have CS6. I understand that files can go form 2 to 6, but not backwards. Thanks Robert
you can download a new installer and serial number from Adobe at Adobe - CS2 Downloads
-
i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/software for my device even though i have the latest itunes on my computer. i have tried reinstalling itunes but it still cannot find my phone and now i cannot use my phone as it is stuck on the sync to itunes screen
Have you downloaded and installed the latest version of iTunes from here:
http://www.apple.com/itunes/download/ -
I uninstalled Norton 360 under windows xp and now I'm getting this problem that firefox will no longer load pages. IE and Outlook still work and I can access the internet with them, I can ping any website I like successfully but Firefox won't load any pages ... N
== This happened ==
Every time Firefox opened
== I uninstalled Norton 360 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.0.3705; .NET CLR 1.1.4322; .NET CLR 2.0.50727; Media Center PC 4.0; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; InfoPath.2; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)I found a fix for this, not only firefox but several other networking programs were broken as well (Outlook and IE were ok for some reason) so I reasoned that the Norton uninstall was incomplete somehow - I had done it from the add/remove programs in the control panel. Sure enough that's not enough to release Norton's tentacles in your system, there's an uninstall tool on their website (a whole set of them actually) that managed to carve it out completely and after a restart everything was back to normal. My machines will definitely be Norton-free from now on ... N
-
My hard drive died last week, and I needed to install a new one. Previously, I was able to save a .doc with text and inserted photo to .pdf and then to .jpg. Now I can get the .pdf but can't determine what to do to convert to .jpg. Does anyone know ?
Rather than do that, which means starting over from scratch, losing all your edits, organisation and so on, why not simply use iPhoto Library Manager to revert the Library to the older version? Easier, less destructive.
The instructions on that are here
If you really want to start over: you can access the Originals folder simply by going to your Pictures Folder and finding the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed. -
'''I was on facebook and deleted an icon by using the right-click menu but then all my pictures and all profile pictures, could no longer be seen. I was able to view them in Explorer so this is something I did in Firefox. How can I unblock a site?'''
If you select that right-click context menu entry then you block all images from that domain and not one specific image, so do not use that.
* Check the exceptions in Tools > Options > Content: Load Images > Exceptions (e.g. sphotos.ak.fbcdn.net)
You can use these steps to check if images are blocked:
* Open the web page that has the images missing in a browser tab.
* Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
* Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
* Go to the <i>Media</i> tab of the "Tools > Page Info" window.
* Select the first image link and scroll down through the list with the Down arrow key.
* If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain. -
I can't play music on my iPhone 4 anymore when my phone is off. I use to double click the home button and I could play music with out having to enter my pass code every time. Now it doesn't work that way any more. Can any one tell me how to fix it?
Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting your device, but it can cure some glitches.
-
I have upgraded to the current version of iTunes 12.0.1.26
I am using Windows 7 Premium
I have lost all of my previous playlists and some of my music
This is the second time this has happened when advised of an updated version.
How can I get all my music and playlists back without having to redo them again?Hello richmondhill49,
The article linked below details a number of steps that may help restore your content and playlists to iTunes.
No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
Cheers,
Allen -
I am using a 4th gen ipad with an epson Xp400 air printer my ipad was able to find printer but now it cannot. Printer says wifi setup ok. Do not understand why it can't find printer. Never did work right away always have to restart ipad or do wifi setup again on the printer. I am not sure whether os is ..1 or.2 or just 6.0
bump... Anyone have any answers?
-
I have recently changed my bt home hub and now my airport express won't connect to it? Any suggestions?
Anytime you change out a modem or modem router like the HomeHub, the AirPort Express needs to be reset back to factory default settings and then set up again.
The reason for this is that the Express is retaining some or all of the settings to connect to your "old" modem or hub, so it will not work correctly with a new device unless you start over again from factory default settings on the Express.
Power up the Express for a few minutes
Hold in the reset button on the side of the Exprsss for 8-10 seconds, then release and allow a full minute for the Express to restart to a slow, blinking amber light
Now, set up the Express again, like you did originally with the "old" modem or hub that you had previously. -
Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"?? It happened with Reader and now with Flash player. With the Reader, I was able to find a different installation link using the troubleshooting guide. I cannot find the same with flash player. Please tell me how to install Flash player because there is a website that I cannot even view without it. BTW That is annoying that I cannot even see the website without flash player
my system is XPUse these installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Flash Player for Mac OS X
For Adobe Reader go to http://get.adobe.com/reader/enterprise/ -
I rented two HD movies on Apple TV, both at the same time. I was able to watch one, but the second says - "error while loading this content, try later" - well I tried later numerous times and continue to get the same message. What is my next step??
No, the film will be available for 30 days, but once you start watching it the clock will start running and it will expire after 24/48hrs (depending on location).
You said you rented on Apple TV, which has no accessible storage. When you choose to watch it starts to cache to the small flash drive, which is then flushed when you access another movie (or any other content). Everything is streamed so it will need to load each time. If you want to store any content you need to do so via computer.
Network issues can also contribute to seeing such an error. If on wifi, try ethernet. Make sure DNS is set to auto (settings - general - network). You can also see the status of your network by getting a report (istumbler, netstumbler or similar), to look for signal strength, noise, nearby networks.
Other services use adaptive streaming so they won't be much of an issue. -
I had to restore all the files on my pc using carbonite. I reinstalled iTunes and was able to find my music with the help of Apple support. How do I find my podcasts?
This helped, I restored them, but when I go to iTunes they are not there. Is there another step?
-
i have two O2 Iphone 4 's and one refuses to connect to any wifi network, and gives me dialog saying, unable to join network "name" dismiss. I took it to O2 shop and it will join 02WIFI. They haven't seen this before and couldn't help. can you?
Have you tried standard troubleshooting
ie reboot >> press hold and sleep until Apple logo appears ignoring
red off slider
and look at this
http://www.apple.com/uk/support/iphone/wifi/
Maybe you are looking for
-
Razerd doesn't work when started at boot.
Hey, as the title says the razerd service does not work when I start it at boot. (using systemctl enable razerd) I'm currently using the git version from the aur to see if it would fix anything, though I was using the standard package before. What ha
-
I will like to buy a Iphone, but I have 1 Question. Is posibble to synchronize my contacts, calendar and emails wiyh Lotus Notes???
-
Hi Can body send links & Material For Bapi, Badi,User-exits
Hi Abapers, Can body send links & Material For Bapi, Badi,User-exits, This is my mail id [email protected] With Regards Bhaskar rao.M
-
BitmapData.draw() and Security
I am dynamically creating screen captures from flv files located in separate sub domains through the Bitmap Data Draw method. The problem is the illusion that flash calls security. "When you call the BitmapData.draw() method with progressive video as
-
Simple. Does the iPhone 5s have usb 3?
Can you verify? Thanks.