I have a MacBook Air...I am having a very hard time loading some websites

I am having a very hard time with some websites opening on my computer, but when I try to open them on my daughters computer(not an apple) it opens immediately

Go step by step and test.
1. Power cycle
     Power off the router. Unplug it from the wall. Wait a while.
     Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
     It will take a   while.
     Restart the computer.
     Start up in Safe Mode
     http://support.apple.com/kb/PH11212
2 Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
    2. Quit Safari if open.
    Option click the "Go" menu in the Finder menu bar.
    Select "Library" and then "Caches".
    Look for the folder 'com.apple.Safari"
    Right click "com.apple.Safari" and select "Move to Trash"
    Relaunch Safari.
3. Reset Safari.
    Click Safari in the menu bar.
    From the drop down select "Reset Safari".
      Click "Reset".
4. Safari > Preferences > Privacy > Cookies and all other website data:
     Press “Remove All Website Data” button
5. Turn off Extensions if any, and launch Safari.
    Safari > Preferences > Extensions

Similar Messages

  • MacBook Air 13" is taking a very long time to boot up

    My daughter purchased a MacBook Air 13" last 1.7 GH Intel Core i5, 4GB Memory. A couple of weeks ago, my daughter noticed that her computer was taking a long time to boot up. Apparently the bootup time has progressively lengthened to 3 - 5 minutes to get to her desktop. What happens is the boot-up process seems to stall on a grey screen and beach-balls until the desktop eventually appears. Does anyone have any idea of what could be causing this issue? Any tips, tricks, suggestion would be helpful.
    Thanks!!

    I would consider doing the following:
    Reinstalling Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • I am having a very difficult time publishing my website, it is very frustrating! It comes up with a few different excuses

    I am having a really difficult and frustrating time publishing my website. The responses are:make sure you are connected, server is busy… Help?

    Kristine ~ Welcome to the Support Communities. If you're publishing to MobileMe, this Apple doc may help:
    MobileMe: Troubleshooting iWeb publishing issues
    But if no luck with that, MobileMe live chat support is now 24/7 — see this announcement.

  • Having a very hard time dragging my sequence into an Encore timeline

    Hello, here is a screenshot, which I discuss further down this post:
    I'm having a heck of a time trying to import the "MASTER SATURDAY" sequence down into my timeline.  Dragging and dropping does not work, neither does right clicking on it and selecting the option "New/Timeline".
    When I do that, nothing happens.
    Does this have anything to do with where it says above that my DVD transcoding has "not been set"?
    Thanks,
    I'm stumped!
    My 629.mov file shown above drags and drops into the timeline just fine.
    Matt Dubuque

    PLEASE NOTE: I did try to set this all up so that I was dynamically linked with my project in Adobe Premiere Pro.  I don't know if I succeeded in that undertaking or if that is relevant.
    Here is a slightly expanded screen shot that could prove helpful:
    The sequence I am trying to import is listed at the top as a "Premiere Pro Sequence".
    Matt

  • Why can't I sign into my school cc Campus connect Ivy Tech I'm having a very hard time

    Keeps and default it will not let me sign in I have the right password but everytime my finances axxxxxx I try to go to link is siges of

    Hi Yjames3,
    Thank you for your question. I understand that you are having issues with signing into a website even though the username and password are correct. Please check the following:
    # Make sure that there are no incorrectly stored passwords if you remember passwords.
    # Please clear the cache and active logins by selecting Settings > Privacy > Clear private data
    # Try to connect to 3g and wifi and clear the private data before trying to login again.
    # another add on I would try is the Password manager at [addons.mozilla.org]
    I am not sure if this will help, but it can show the active connections in the browser:
    # There is a new tool you can check the network connections on Firefox for android go to [about:networking]

  • Why am I having a hard time loading some web pages and not other

    My Home page

    only in safari ?
    tried other browsers?
    if only in safari
    then the safari forum may have more safari experts who may not read posts here
    https://discussions.apple.com/community/mac_os/safari

  • I got an iTunes card and half the number is gone so I can't read it. Having a very hard time getting this fixed. Could someone please Email me on where n how I get this fixed. Thank you.

    Can someone please tell me how I can get find out the code on my iTunes card. Only half of the number is on my new card and I can't read it. Thank you.

    iTunes Store: Invalid, inactive, or illegible codes

  • I have a new MacBook Air.  When I first got it, I migrated some of my files from my PC to the MacBook Air with no issues.  Now, I',m trying to migrate more documents, music, etc. and migration assistant won't get past "Looking for Other Computers."  Why?

    I have new MacBook Air. When I first got it, I migrated some of my files from my PC to the MacBook Air without any problems.  Now I'm trying to migrate more files, music, etc. and I keep getting the continuous spining circle with "Looking for Other Computers."  I've tried everything and for some reason it is not finding my PC. What am I doing wrong?

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • Hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

    hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

    Try reinstalling Combo Update.
    http://support.apple.com/kb/DL1676
    Best.

  • I have a MacBook Air version 10.6.8.  2.13 GHz Intel Core 2 Duo with 2 GB 1067 MHz DDR3 memory.  I'm having trouble with internet connection.

    I have a Macbook Air 2.13 GHz 6MB, 2 GB memory and I'm having trouble getting connected to wifi or internet.  I've already checked the airport.  I've also verified the connection on the router.  I am still not successful in getting connected.

    Delete all the existing wireless networks you have stored in the MBA under the network setup of the wireless card.
    Power off the MBA and power on again and then rediscover the wireless..
    Any luck??
    If you still have issues.. more info.. what router are you using? How much wireless signal do you get? Can other devices connect and it is just the MBA that has trouble??

  • I cant remember my administrator password. can anyone advise me how to reset the password without having the original? I have a MacBook Air - Mac OS X 10.6

    I cant remember my administrator password. can anyone advise me how to reset the password without having the original? I have a MacBook Air - Mac OS X 10.6

    Welcome to the Apple Support Communities
    As you are using Snow Leopard, read "Resetting your original administrator account password" > http://support.apple.com/kb/HT1274 You have to start from the Mac OS X Snow Leopard disc, so you need an external optical drive or another Mac or PC to use Remote Install Mac OS X

  • Hi, I'm having issues with my airdrop. I have looked in my finder perfrences and didn't see the check box for airdrop. I have a macbook air running on 10.9.4 Mavericks. Does anyone know how to get my airdrop back? Thanks.

    Hi, I'm having issues with my airdrop. I have looked in my finder perfrences and didn't see the check box for airdrop. I have a macbook air running on 10.9.4 Mavericks. Does anyone know how to get my airdrop back? Thanks.

    Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support

  • I have a MacBook Air with OS X and am having trouble accessing the ADT Pulse Home Security System cameras.  The mobile (iPhone and iPad) apps allow access no problem, but I can't get a picture on the MacBook.  Have tried Safari and Firefox browsers.

    I have a MacBook Air with OS X and am having trouble accessing the ADT Pulse Home Security System cameras.  The mobile (iPhone and iPad) apps allow access no problem, but I can't get a picture on the MacBook.  Have tried Safari and Firefox browsers.  Anyone have any ideas?  Thanks.

    From a Catherine to Katherine -- Had the exact same problem!!  I had to enable Java twice - both in Safari and then on the MacBookAir itself.

  • My start up disc is full i have a macbook air, i back everuthing up with time capsule and  have movies all my music libraries and photos onto that too so as i have free space, but my max still says my startup disc is full with "other"

    my start up disc is full i have a macbook air, i back everuthing up with time capsule and  have movies all my music libraries and photos onto that too so as i have free space, but my max still says my startup disc is full with "other"

    First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    If you're using Time Machine to back up a portable Mac, some of the available space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
    To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
    You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Proceed further only if the problem hasn't been solved.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install ODS in the Applications folder as usual.
    Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
    When you're done with ODS, quit it and also quit Terminal.

  • I have a macbook air bought in 2010 wit liquid damage that might has affected the SSD card. I need to get my data but apple won't help. Authorized dealers never seem to have the same model to try whether the SSD card works. How can I get my data quickly?

    Hi
    I have a macbook air bought in 2010. It has liquid damage that might or might not affected the SSD card. I need the data on my SSD card for work and I need it urgently. Apparently Apple won't get the data out, even if I have apple care... Licensed apple dealers need to have the same macbook air model so they can insert the SSD card and check whether the data is there, and they never seem to have one...
    I'm really disappointed with apple. It's been two weeks and I haven't been able to find out whether the SSD card is holding my data. It can't take that long to do it in store... How can they sell a product and then wash their hands on the matter?
    Anyway, enough with the apple rant. I need to get this data urgently so I need to find out how I can get it out of the card. The SSD card and data might be fine so I don't want to take it to a data recovery centre and get charged loads.
    Thanks for your help.
    Olatz

    See this link for a 4870 card, best instructs for flashing for a noob like me. (last lowest price was $150 for a 1GB vRAM 4870 from TigerDirect).
    http://web.me.com/jacobcroft/4870Flash/4870Flash.html
    However, not every 4870 card will work with the ROM currently floating around out there. BEWARE!
    Link to recovering a bricked card:
    http://forums.techpowerup.com/showthread.php?t=64328

Maybe you are looking for

  • I wnat to add new fieldtext in the alv list output plz tell me

    hi, i whant add new fieldtext in the list output, plz tell me where can i modify it. CORRECTIONS DATE       CORRECTION NOTE    AUTHOR DESCRIPTION 09.03.2001 L9CK045451 0388404 XSC    Wrong list output for multiple Os 05.06.2001 AL0K023393 0410219 Lud

  • Here is a crazy problem. My home movie will no longer play in iTunes.

    I created a home movie using Final Cut Pro X.  I shared it to ITunes.  The video played ok.  I then changed the name of the video under the "get info" tab in iTunes, and the thumbnail view of the video changed from the first frame of the movie to a p

  • Need help restoring itouch - dont have passcode or original PC

    Hello folks - My father in law just gave me his old itouch to me. It had been collecting dust for more than a year now. I would like to begin using the itouch, but I am unable to access it on my PC. I don't know the passcode for the itouch, and the o

  • Invalid node structure error when verifying hard disk, please help

    My 27" Mid 2011 iMac is having hard disk issues. I attempted to repair the disk but received an error that said the disk cannot be repaired and needs to be re-formatted. I have all my files backed up to an external hard drive so I erased and formatte

  • Value based reports

    Hi friends, I have column which contains 3 values , ex :Column A contains values 1,2,3. and i have 3 reports.like Rep1,Rep2,and Rep3. If i click on value 1 , it should go to Rep1........ How can i give? Thanks....