I have a MacBook Air with OS X and am having trouble accessing the ADT Pulse Home Security System cameras. The mobile (iPhone and iPad) apps allow access no problem, but I can't get a picture on the MacBook. Have tried Safari and Firefox browsers.
I have a MacBook Air with OS X and am having trouble accessing the ADT Pulse Home Security System cameras. The mobile (iPhone and iPad) apps allow access no problem, but I can't get a picture on the MacBook. Have tried Safari and Firefox browsers. Anyone have any ideas? Thanks.
From a Catherine to Katherine -- Had the exact same problem!! I had to enable Java twice - both in Safari and then on the MacBookAir itself.
Similar Messages
-
I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note. I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds. I can't get rid of it. I have tried to clear out the iMessage settings I had put in, and I've tried to adjust the Accounts to not include notes to synch. But, Notes will not stop. It opens a new note, and even if you ignore it, it assumes preference every 5 seconds, and the Mac is impossible to use.
Do you have any Boot Camp or other secondary partitions set up on your system? If so then try running a disk verification routine (chkdsk, etc.) in Windows to repair the disk. While I've not heard of it happening recently, in the past errors in these partitions have resulted in stubborn ghost files appearing in OS X.
-
I can't get my pictures into the public folder on the iPad 3. Can anyone walk me through the steps?
I can't get my pictures into the public folder on the iPad 3. Can someone walk me through the steps?
Ok, I'll give it a try.
Presuming you already have a Dropbox account, and you have the app on your pad.
Open the app, navigate to public folder. Touch the upload icon at the bottom. It will show you everything you have already uploaded. To upload a new picture, then touch the plus sign at the top right. You can create one or more subfolders to organize it however you want.
Hit the plus sign again if needed, and the photo listing will show up. Find the photos you want and mark them by touching them. Then touch the blue word upload in the upper right.
( the directions assume the pad is in the landscape mode.)
That's really all there is to it. As I typed this I opened and uploaded a couple of pics to get the steps right. -
I have purchased Wedding Style By Miracle Design - it is showing in the downloads but I can not get it into lightroom - I am using a mac and the instructions are for windows.
Return, cancel, or exchange an Adobe order
-
Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off and is no longer recognized by itunes.
thank you for your help.Hi there beni_m,
You may find the troubleshooting steps in the articles below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
I have a new-in-box version of Audition 3.0 that I purchased about 6 years ago; for a variety of reasons it's been sitting on the shelf all that time. I now need to install it; It installs fine on my system (Win XP) but I can't get it to activate. I'm trying to use phone activation because the machine I will be using is not net-connected. How can I activate this s/w?
You won't be able to. You will need to acquire a special copy. See the following:
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l -
How can i get my pictures from the cloud if deleted from my Iphone
how can i get my pictures from the cloud if deleted from my Iphone?
Restore a backup of your phone that was made while the photos were still on it. It should include your camera roll photos. This explains how to restore an iCloud backup: iCloud: Restore your iOS device from iCloud.
-
I recently upgraded to Yosemite 10.10.2 and Aperture 2.1.4 will no longer open. I cannot access my photos and I don't want to pay for latest version of Aperture since this application is no longer going to be supported. How can I get my pictures?
If you want just the originals, then you can go into the Aperture library (right click on it and do "show package contents"). Inside is a directory called "Masters" and you can find the original files in a bunch of subfolders.
But... you'll lose all adjustments, keywords, and other information, and just have the files as they were imported originally from the cameras.
Easiest is probably to buy Aperture and update everything, and then migrate to the Photos application down the road if that's what you want. Aperture 3.0 came out in 2010 (five years ago!) so it's not like you've upgraded in a while -
I have the Sony Erickson Experia X10 phone with Android 2.6 running on it. My phone is listed in the compatible phones list, but I can not get it to locate the app, nor can I get it to download. I have tried from the browser, the market app and even android.com's site. I can find the mobile app on the android.com market site (via my laptop) but it insists that it is not compatible with my phone. I love my FF and want the continuity this would provide. Please help!!
There is no version 2.6 of Android. If you are using Android 1.6, then you will need to update your phone to Android 2.0 or later before you can install Firefox.
To check which version of Android you have, open the "Settings" app, then choose "About phone" and look for "Android version." -
Q:I have my iPad connected to my electrical outlet, but I can't get it to charge. It just says not charging in top right corner. What do I do?
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
Photos tells me it is connecting to Library for shared photos. It's been saying this for about ten hours. I can't stop it from searching or get it to do anything else. I can go back to my photos but I can't get Photos to find the shared items.
Be sure Safari does not have the Block Pop-Up Windows preference set.
Where I work now there are several unencrypted VLANs that require authentication, and Safari promptly pops up a window for me to register every time. -
My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance
Apparently it's related to the Firefox plug in.
This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
2. Select to "Options
3. Select "Applications"
4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
5. Open a test PDF. It should open in it's own window now.
Again, not a complete solution but something that'll at least let you scroll with PDFs open.
More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033 -
i am getting no sound from all of the game apps on my ipad. i.e. angry birds, scrabble, but I can still get sound from the ipod app. also I can hear the games if I am using earphones
You have your mute button on. In Settings check to see if you have Lock Orientation checked or Mute checked on the right hand side. If you have Mute checked, all you need to do is click the mute button above the volume control buttons on the upper right hand side of your iPad. If you have Lock Orientation checked in settings, you double click your home button and the most recent apps will appear. Swipe your finger to the right until the Mute icon appears on the left side. Touch it and you will unmute system sounds.
-
I am not able to type anything in the address bar or click on any menu options with the browswer. The whole browser is just stuck, I cant do anything in it. It loads up fine but nothing can be done at all within the broswer.
Hi,
( I search for iChat questions when I have finished in the iChat Forum)
So the menu bar reads iChat, File, Edit, View, Buddies, Video, Window and Help
There is no Buddy List open.
There is no other window for iChat open.
In the iChat Menu you only have access to Status.
Is an item ticked in the list ?
Is this a green (Available item) or Red ( an Away one) ?
Can you access the Accounts option ? (Sitll in the iChat Menu)
Is anything in here ticked ?
In the Window menu any Logged in account should appear in the list (Between the Next Chat and File Transfer items)
It would be useful to know which version of iChat this is.
If no account is ticked (iChat Menu > Accounts) or not showing in the Window Menu, plus you cannot determine the Status and you cannot access the Preferences then you need to access your Home Folder/Library/Preferences
As the Library in the Home Holder is Invisible in Lion you will need the Finder's Go Menu > Go to Folder option (you can use it in earlier OS versions if you want)
Type in:-
~/Library/Preferences
Find the file called com.apple.ichat.plist
Drag it to the Trash and Restart iChat.
This will lose all the settings in iChat that you have changed from Defaults but there is no way around this.
9:23 PM Saturday; August 27, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I have a form that has multiple fields but has 5 sections. I have used mail merge to insert information but I can't get Excel to recognize that I need different names and addresses for each section. Please help.
Thanks for your response. I do believe I have the information needed for each form on a separate line in Excel. There is a first name, middle name, last name, city, and zip column. And field is entered on a different line for all the information. I'm really stuck.
Maybe you are looking for
-
Unknown exception while creating Item: PPM 5.0 (SP11) + NW 7.41 SP03 + ECC 6.0 EHP7
Hi we recently upgraded from PPM 5.0 SP 9 to SP11. Along with that we did below updates as well. NW 7.02 SP10 --> NW 7.41 SP03 ECC 6.0 EHP5 --> ECC 6.0 EHP7 During creation of Item we are getting below error Exception occurred in the update of the ap
-
Can't update or install any apps [was:adobe creation]
i cant update or install any apps. please help me.
-
Hi, I don't know if I am confusing something. I have the base class main.as. From there I do addChild(child); First thing the child does is trace ("Parent: " + MovieClip(parent)); and it always gives me null. How can this be? It actually works to lau
-
Hi All i am using JTable . while updating the values in JTable i am getting the following exception. even though i am getting the exception. i am able to modify the the values. can any body tell why this exeption is raising. in the exception ProcessI
-
Stop appts changing time in calendar
When I change time zones, my appointments change time as well. How do I stop this but be able to change time zones when I am flying interstate. I would have my appointments on the correct time wherever I am.