I have a MacBook Pro and can't print pdf files or word documents using my HP Wireless Photosmart Printer. It will print files from the internet. Any suggestions or ideas will be greatly appreciated. Thank you.
I have a MacBook Pro and can't print pdf files or word documents using my HP Wireless Photosmart Printer. It will print files from the internet. Any suggestions or ideas will be greatly appreciated. Thank you.
Hello, SoonerAnesthetist.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
OS X Mavericks: Solve printing problems
http://support.apple.com/kb/PH14142
Cheers,
Jason H.
Similar Messages
-
I have a MacBook Pro and for some unknown reason I can't open numbers I keep getting a message error -1712 I can't open old documnents not the program
-1712 is a time-out error. It means the application (Numbers) is taking too long to do somthing. The 'something' is often attempting to open a corrupted file.
Holding the shift key, as suggested by Jerry, prevents Nmbers from trying to reopen files that were open when Numbers was last quit. For future reference, you might consider, before quitting Numbers, closing all files you will not require in your next session. Even ignoring the possibility of another corrrupted file bringing this problem on again later, not re-opening the files you do not need in the next session will shorten the launch time for Numbers.
Regards,
Barry -
I have just purchased a MacBook Pro and iWork's. When I try to upload documents using iCloud, it now wants me to purchase iWorks for iOS ? Do I need to purchase both versions?
To be able to use documents at iCloud.com, you need at least one iOS device that uses the same account with at least one of the iWork apps installed.
-
I have a I-MAC and have used firefox, but lately it will not open from the dock, any suggestions?
As stated above, have used Firefox from the dock for quite a long time, but recently it did not do anything when I clicked on it, just sat there. Have been able to get to it using spotlight, but even then have to go thru extra steps and go thru a step that says something like "this application was downloaded from the internet. Do you want to open it? YES/ NO " Any ideas ? Should I dump it and reinstall, and if so , how would I uninstall?
Hello Chelleuri,
Thank you for using Apple Support Communities.
The following article provides information to trroublehshoot issues with installed apps, including not opening.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Regards,
Jeff D. -
I have a macBook Pro and can't figure out how to insert a dvd, how do i open the draw?
I have recently acquired a Macbook Pro, this is crazy but I can not figure out how to insert a dvd. I can see no switch to opperate the draw and the menu does not offer an option to open draw or insert disc! I be very gratfull for some help!
Unless you fell for it and got a Retina, in which case no drive for you! Will have to go back to the store and purchase an external Superdrive to go with it.
-
I have a Macbook Pro and can't figure out how to change my password. Any help?
This is a password for like entering my compu
Boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities > Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A “Reset Password” window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled “Select the user account” if not already selected.
Follow the prompts to reset the password.
Select Apple menu > Restart from the menu bar. -
Just Migrated Files from Old Mac to New MacBook Pro and Can't Open PDF File
Does this computer come with Adobe reader pre-installed or do I need to down-load it from Adobe?
Thank you.If you want Adobe Reader, you'll need to download it. Even if it's already present on your hard drive, you'll want to have the latest version, and the preinstalled version (if there is one) probably isn't it.
-
There are no more details. The files either open to a blank page or the first page only.
Me thinks you have tried to connect to a shortcut folder and not a genuine folder.
Note Mac OS X in Mac OS X 10.4 has 3 popular folder shortcut locations:
The leftmost column of the Finder window.
The horizontal toolbar on the top of the Finder window
The translucent bar which can be anchored on the side or bottom of the screen known as the Dock. These are not true folder locations, but only locations for shortcuts. When you click on a folder for a volume that is not mounted, or is a folder which was deleted it will behave in this fashion. Often if you click on it the right fashion, it will change to a question mark.
In addition if it is an alias to an existing folder that has no contents, it will behave this way from the three shortcut locations.
If you right click instead of the left click a folder, it may think you want to do something to the folder which you can't do. Make sure your mouse button functions properly as a Primary button on Apple menu -> System Preferences -> Keyboard and Mouse.
Also make sure Universal Access is not turned on as it too can cause funny behavior in the mouse click actions, in Apple menu -> System Preferences -> Universal Access. -
Cannot downoad files/programs from the internet, any suggestions on how to fix this problem? thanks!
hi, i upgraded my previous version of firefox to firefox 4 and then added the toy factory theme to the firefox 4 browser. after trying to update my plugins, the files from the adobe site are not downloaded into a file on our computer.
after reinstalling firefox 4, still unable to successfully download plugin program updates from the software publisher's websites.
-
I have an Apple Bluetooth keyboard that locks up my iPad whenever I turn the keyboard on. Any suggestions or tips would be greatly appreciated.
If you are sure that the battery isn't empty, then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
hi my ipod touch 8gb won't turn on just get the apple sign in middle of screen and my laptop also can't find my ipod wen i plug it in? any help would be greatly appreciated thank you.
OR use this method
1. Press-hold the Home button (big circle below the screen)and the Sleep/Wake button (on top of the iPhone) simultaneously.
2. Continue holding both buttons (Ignore the"Slide to power off") until the iPhone shuts off and begins to restart.
3.You may let go when you see the silver Applelogo.
Thats all Folks!! -
I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help? thanks
Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
Press and hold in reset until the front LED flashes rapidly.. about 10sec.
Release the reset.
Open the airport utility and setup the TC to bridge mode.
The actual method depends on version of the OS and airport utility you use.
This is version 5.
Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
Then setup wireless.. you have a number of choices here.
Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
Update the TC.. unplug fromt the computer and plug it into the homehub.
If you have other issues with the setup tell us what OS you run so we can post suitable screenshots. -
I have a macbook pro, and the hard disc recently crashed. I lost everthing, but luckily i have my music saved on my ipod nano. How can I now transfer my music from my nano to my mac for free?
Hi there ovadia!
You can transfer the music purchased by your iTunes account from your iPod nano to your MacBook Pro by following the steps outlined in this article:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
Thanks for using the Apple Support Communities!
Cheers,
Braden -
I have reinstalled mountain lion on my MacBook Pro and can't get the games back App Store says they'll already installed how can i download them can anyone help
I have eactly the same problem - it seems that the downloaded version on MBA is version 6.0 and on iPad is is version 2.0 -
Issue is when i tried to save the presentation on MBA Keynote 09 - Keynote crashed.
I tried to save is as Powerpoint in MBA and it crashed as well!
Message was edited by: Innovaxin -
I have a macbook pro and I connected a new iphone to my computer. Somehow all my pictures in the iphoto app deleted. How can I get them back, and no I do not have my TimeMachine On. Please help!
If you are running Lion then all drivers are distributed through Software Update. You do not need to install anything, other than to install the printer in System Preferences > Print & Scan. If you already added the printer while it was connected using USB, you might want to delete it and set it up again wirelessly to avoid confusion. Or, give them two distinct names e.g. "Photosmart D110 (USB)" and "Photosmart D110 (wireless)".
All scanning functions are now performed using Preview, but you can also access the scanner through the same Print & Scan preference pane, or with Image Capture.
This HP document may help explain how driver software is distributed now:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03079365&cc=us&dlc=en&lc=en &product=4144493&tmp_track_link=ot_search#N108
Maybe you are looking for
-
How can I get PlayOnLinux's wine config to detect my audio device?
This is really bugging me, I've been all over the internet for answers but can't seem to find out how to get this to work... I have Steam installed under PoL (PlayOnLinux) using wine 1.5.10 internally and I just can't seem to get any sound in my game
-
How can I insert the RSCRM_BAPI into Process chain?
Dear all: Now I Use RSCRM_BAPI(RSCRM_REPORT) ,excute a query , Get the result in a table, I use this table as a datasource,and then next steps,upload data. all of this runs well. But I want inset this process into a process chain. now I don't know h
-
Hi, I am facing this weird issue. Any help would be appriciated. I have view with the following definition: CREATE VIEW [marketing].[OpenedMails] AS SELECT ID_EmailAddress, ID_Date_Opened, ID_Contact, ID_MailSendJobs, COUNT(ID_OpenedMails) AS Open
-
I have a linksys wirless router and i can view most pages execpt a couple ebay and anothe. if i plug my cpu into the modem direct it works? what can i do?
-
I have an arraycollection, Called myPrices. I just want to display the Product number from the arraycollection. I dont know the syntax. This gets me [Object.object] <mx:Text text="{myPrices}"/> If I make a datagrid and make one column be PWDL01 I get