I have a macbook pro and F3 for launchpad and I tried to restore it and its not working. Help please, what should I do?

Plase help

Not sure what you are asking here.
Are you saying that pressing F3 no longer brings up Launchpad?
If so check System Preferences > Keyboard > Keyboard Shortcuts
Follow the instructions at the top of the box. (Double-click "Show Launchpad" and then press the F3 key on your keyboard.)
Should start working again.
Also, make sure that System Preferences > Keyboard > Keyboard "Use All F1, F2, etc, keys as standard function keys" is UNchecked.

Similar Messages

  • I have two iphones , i lost one  and entered to find my iphone and as mistake i block both and delate all the data of both. how can i get it on, im trying to restore it , but its not working ...

    i have two iphones , i lost one  and entered to find my iphone and as mistake i block both and delate all the data of both. how can i get it on, im trying to restore it , but its not working ...

    Hi Roger
    Thank you for your reply.
    My original feed is: http://casa-egypt.com/feed/
    However, because I modified the feed http://feeds.feedburner.com/imananddinasbroadcast and nothing changed, I redirected it to another feed and then I deleted this feed.
    Is there any way to change the feed in itunes? The only feed I have now is  http://feeds.feedburner.com/CasaEgyptStation
    I tried to restore the feed http://feeds.feedburner.com/imananddinasbroadcast but feedburner refused.
    I know that I missed things up but I still have hope in working things out.
    Thanks is advance.
    Dina
    Message was edited by: dinadik

  • I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

    I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

    Instead of getting annoyed, read the User's Guide and try basic troubleshooting.

  • I have a ipod 5 and its not working and i will like to get it fixed and i want to see if i still have my warranty

    I have a ipod 5 and its not working and i will like to get it fixed and i want to see if i still have my warranty

    Check Your Service and Support Coverage: Apple - Support

  • Hello i was updating my ipod 5 to ios 8 and when it was in the middle of updating it came up that i had to connect to itunes and i have done so and its telling me to restore it and i have tried many time to and its not working. So what to i do??

    hello i was updating my ipod 5 to ios 8 and when it was in the middle of updating it came up that i had to connect to itunes and i have done so and its telling me to restore it and i have tried many time to and its not working. So what to i do??

    What exactly happens when you try to restore via iTunes?
    Error messages?

  • The left side of my home button is screen is kinda feel like hollow when I tap it and it makes a sound too. It is bulge,a little. I thought every ipad is hard to touch but why mine is not? Help please,what should I do?

    The left side of my home button is screen is kinda feel like hollow when I tap it and it makes a sound too. It is bulge,a little. I thought every ipad is hard to touch but why mine is not? Help please,what should I do? Please I need your help.

    The damage has been done then
    Take it to Apple and pay for a replacement
    Here in the States a replacement cost $229
    Allan

  • SOMEONE PLEASE HELP ME THIS IS MY FIRST TIME DOING THIS MY IPOD IS DISABLED AND IT SAID CONNECT TO I TUNES I DID THAT AND ITS NOT WORKING HELP ME PLEASE AND THANK U

    SOMEONE PLEASE HELP ME THIS IS MY FIRST TIME DOING THIS MY IPOD IS DISABLED AND IT SAID CONNECT TO I TUNES I DID THAT AND ITS NOT WORKING HELP ME PLEASE AND THANK U

    Please turn off your caps lock.
    See http://support.apple.com/kb/HT1212.

  • I have a MacBook Pro, and will not let me open a file because it says I do not have permission.  How do I fix this?

    I have a MacBook Pro and it will not let me open a file that I have used several times in the past because it says that I do not have permission to use it.  How do I fix this?

    Oops, my bad.  The repair disk permissions in Disk Utility doesn't actually fix the User home folders.  To do that boot into the recovery partition and when the recovery desktop appears select Utilities -> Terminal. Enter “resetpassword” and press return - don't worry you're not actually going to reset your password!
    Ensure that your username is selected from the “Select user account” menu, then under “Reset Home Directory Permissions and ACLs” click the “Reset” button.
    Click on the Apple menu and restart your computer.

  • HT201210 i restored my iphone 3gs to factory settins and now it says to connect to itunes when i turn my phone on i try to onnect to i tunes and its not working  help asap

    i restored my iphone 3gs to factory settings and now when i turn it on it says to connect it to itunes well i tried that and its not working then i tried to hold the power button for three seconds then the home button for ten seconds but still nothing please help asap

    If iTunes doesn't recognize it, do this:
    http://www.apple.com/support/ipad/assistant/itunes/

  • My phone is not making calls or sending text it keeps saying it is searching in left hand corner! I've read and tried to restart and reset and its not working! Please help

    My phone was working fine this am then I go to use it and there is a searching word in the left corner and I can not send a text or a call, i read what the online said to do and it did not work! Please help!

    The searching is searching for your cell phone providor... without that being connect you will not be able to use your phone or text messages... try turning on Airplane mode for 30 seconds and turning it back off to see if it reboots the providor search.

  • Wi-Fi loosing connection every few seconds on my macbook pro and its not my router's fault (running yoseomite)

    Basically I bought my new Macbook Pro retina display in September 2014. My wifi was working perfectly well for about a month or two until Yosemite was brought out. I'm not sure if it was immediately after I downloaded Yosemite or not, but not long afterwards I noticed I was having trouble with my wifi (and not just mine but my schools as well). Every time my computer tries to join the wifi network it will work for a while (5 seconds) and it will say that I have a wifi connection but then it will just stop working and it will say I'm not connected to wifi. A few seconds later and it will then reconnect and say I have wifi. I am fairly certain this is not my wireless router ( a BT home hub) as I have other devices such as my iPhone and a computer which does not suffer these problems. After a while of it loosing connection and then gaining connection it will finally stop and the wifi icon at the top will suggest I have a wifi connection but when I hover over it, I see it says "Wi-Fi:looking for networks..." and then 2 seconds later it will say "Wi-Fi: On" and it will repeat like this for however long I am on the network. When the icon appears to suggest I have a connection I am able to load a webpage but it is slow and watching Netflix can be tiresome. I've scoured these forums for information that will solve my issue however all I have found is outdated information from 2010 or 2012 or too technical information that I can't understand. Does anyone else have this problem, has anyone else found a solution, it would be much appreciated if any one could help me solve t.

    Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
    Step 1
    Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Be sure to test on more than one Wi-Fi network, if at all possible. A desktop computer can be tested with a mobile hotspot, such as the hotspot created by a cell phone. If the problem only exists on one network, then the access point of that network should be the focus of your attention, not the computer.
    Step 2
    Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
    Step 3
    If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
    Step 4
    Open the Energy Saver pane in System Preferences and unlock the settings, if necessary. Select the Power Adapter  tab, if there is one. Uncheck the box marked
              Wake for Wi-Fi network access
    if it's checked.
    Step 5
    Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
    Step 6
    In the Wi-Fi settings, select
              Advanced... ▹ TCP/IP ▹ Configure IPv6: Link-local
    Click OK and then Apply.
    Step 7
    Reset the System Management Controller.
    Step 8
    Reset the PRAM.
    Step 9
    Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first. Turn Wi-Fi off and then back on. You'll be prompted for the password when you reconnect. Save it in the keychain.
    Step 10
    Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

  • Programs suddenly quitting on my Macbook Pro and Airport not working right

    I upgraded from an ibook to a Macbook pro about a month ago. Over the past month at least once a day a random program will "unexpectedly quit" on my computer. I have updated all the software on my computer and dont really run much peer to peer software. Also, after waking up from "sleep" my airport will suddenly stop working or even recognizing the my network. This is only solved by a restart. Can anyone help with this? I never had these problems with my sturdy old ibook. Between the high temp my computer reaches, the relatively short battery life, and the issue with all the software quitting I'm starting to feel like I was sold a lemon. Any positive feedback would be appreciated.
    macbook pro 15' Mac OS X (10.4.6)

    I have a 15 inch mbp and while i am using it the computer shuts down while i am working in word. This is upsetting as I am losing what I havent saved since the last save.
    This problem cropped up today. Any thoughts or suggestions. I havent added anything by way of ram or other hardware.
    Please I need your thoughts. This is my first mac.
    Thanks for the assist

  • I dropped my iphone 4s in water and now everytime i plug it in it show a charger pointing to a itunes thing i have tryed to recover it but its not working!! what do i doooo?!?!?!

    i was at the beach and was washing my shoes off then it fell in the water it was working alright but then it died and will not turn on and keeps showing the same thing i have tried to recover the iphone a couple of times but its saying the same thing.. do i have to go get it repaired if so how much... please help!!!

    If you are talking about the warranty from Apple that would have expired when your iPhone hit the water. So it doesn't matter. Just take it to Apple and purchase an out of warranty replacement for it.
    Allan

  • I have downloaded PDF Converter and its not working properly

    the pdf I am attempting to convert to edit is not working. I have converted it to all that is available and the lines are off  in someplaces and some data is in the wrong place when I try to Move it I can't or it makes it worse. what can I do?

    As Pat said, which PDF Convertor are you reffereing to here? Which adobe application are you using for the same? What's the operating system that you are using?

  • I have a prepaied card and its not working

    I have a prepaid card and it's not working

    See Kappy's previous write-up.
    Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities
    for got security questions: Apple Support Communities
    natalia2000 wrote:
    yes i am entering the card code and when i do it states that i able to use my card because of my security questions not being answered correctly then i reset it and still not able to use the card

  • Iphone 3gs- updated to the ios 5.0.1... since then i plugged it into itunes, an now my phone restarts itself every 3-4 minutes! Restored 4 times and still not working help please!!!!!

    iphone 3gs- updated to the ios 5.0.1... since then i plugged it into itunes, an now my phone restarts itself every 3-4 minutes!!! it so annoying! its useless, i cant do anything with it. restored it 4 times and its still doing it!!! please help!!!
    i contacted o2 and they said id have to pay to get it fixed after sending it away for ten days if their was a fault, when im still under warranty!! contacted apple who will get back to me!

    I am assuming you updated to version 5.1.1, not 5.0.1 since no legitimate version of 5.0.1 is available.
    Where is this iPhone from and what means did you use to unlock it?

Maybe you are looking for

  • Stale data error: OA page opened by different users

    Hi, An OA Page which is basically use to query order details and update certain custom tables based on the order details has been developed. The first page which is a search page perfoms the search based on the "Custom Name", "Order Status" --> Bith

  • Link between Service Entry Sheet and Material Document

    Hi I am busy with developing a report where i am required to find the link between the Material Document and Service Entry Sheet.  I am aware that on the Purchase Order Data tab of the Material Document has the service entry sheet number and line ite

  • Can CS 5.5 co-exist with CS4?

    OK here's the story I am using Win 7 - 64 bit, with 4 GB memory, approximately 9 TB storage. I have used CS 4 since it was released, bought CS 5 (did not install it) then I bought CS 5.5, installed it yesterday. I wanted to keep both CS 4 & CS 5.5 on

  • Netui anchor tag in netui:form

    I have some code like following: <netui:form action="action1" > <netui:anchor action="action2">Check</netui:anchor> </netui:form> Action1 and action2 willl be finally redirected to the same JSP(for example one.jsp). The weird thing is that: according

  • Customizing business package

    Hi,   I have a doubt regarding customizing the business package. we have downloaded and installed a business package. now i want to change some worksets and pages. so I made a local copy of all the worksets, roles, pages, iviews into my name space.