I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up ever

I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc

I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc

Similar Messages

  • How do you get Itunes to only sync newly added photos from my phone to the computer and not every photo on my phone each time I try to sync?

    How do you get Itunes to only sync newly added photos from my phone to the computer and not every photo on my phone each time I try to sync?

    Hello Angelcasper,
    Welcome to Apple Support Communities.
    The following article provides some suggestions on importing photos from your iOS device to your computer.
    iOS: Import personal photos and videos from iOS devices to your computer
    http://support.apple.com/kb/HT4083
    Regards,
    Jeff D.

  • I have two MacBook Pros. Can I use one Apple ID?

    I have two MacBook Pros and I really would like to use just one Apple ID. Can I link my facetime (and imessage) to my phonenumber on both or just on one computer? My phone number is linked to my apple id already and I have it linked to one macbook. I just want to know if I can do that for both.

    You can link up to 10 devices and 5 computers with your apple id for iTunes, and one will work for FaceTime or Messages just fine on both of your computers :-)

  • I have a macbook pro, a mini display port to hdmi cable to hook up to my tv (a toshiba 1080p flatscreen).  what do I do to actually get the image on the tv screen?  Do I need another cable for sound?

    I am trying to watch a tv show that I purchased into I-tunes.  I have the cable and it hooks to the TV okay.  The TV shows the regular apple screen that looks like the universe screen - like when it boots up or is doing an upgrade on the OS.  I can't get the image to go from the laptop to the TV.  I tried under displays and it shows the TV as a display but I can't get the image on the TV.......Please help.

    Rwogera wrote:
    I couldn't transmit sound either, do i need another cable like Kim said? i mean it cant be transmitted through this HDMI port? as for me i have one of the latest mac pro with intel core i5..tnx
    I need to know which MacBook Pro you have.  Only mid-2010  and later MBP's transmit sound through MiniDisplay Port to HDMI.  I have no information about the Mac Pro, so you might want to go to that Forum and ask there.

  • How do I get iTunes Match to upload my music library from my external hard drive?  It only got some of the music and not a lot of it at that.

    I'm trying iTunes Match and not having a great time of it so far.  It only got a fraction of my music from my music library.  I contacted support and they told me that it would recognize my external hard drive and take all of the music.  My collection is all from CDs with the exception of a few from iTunes.  I just want more of my collection to be available.
    Can anyone help with that

    The issue is not related to the external drive. iTunes Match has difficulties matching tracks ripped fom CDs because they may differ slightly from the versions on sale in iTunes. You can try the match again. Otherwise do a search of this forum. There are already many discussions on this subject here that may help you.

  • I'm having issues syncing my ipod to my external hardrive's library. How do I sync and get the music from my external hard drive?

    I recently moved the music from my old computer in itunes to my external hardrive (changed the media file location and consolidated library). I connected my external hardrive to my new computer (windows 7) and changed my itunes media file to my external hardrive and consolidated my new computer's library to my external hardrive. When I connect my iPod, it is only grabbing the music from my new computer and not my external hardrive. How do I get the music from my external hardrive onto my iPod?

    Did you move the entire /Music/iTunes/ folder?
    File > Add folder to library and select the folder with music on the external.

  • How can I setup my thunderbold display to work as my primary display? I would like to have my macbook pro 2011 as my second display. thanks

    I have and Macbook pro 2011 february. I have installed Lion with the lastest update. I would like to use my thunderbold display as my primary display. The same way when I close my MB Pro 2011, but I wish to use my Macbook pro display as my secondary display.
    thanks

    If your Mac has got Mini DisplayPort, purchase a Mini DisplayPort to HDMI adapter and a HDMI cable. You won't have to change any setting, and image will show on your TV after connecting it to your MacBook Pro. See > http://support.apple.com/kb/HT4241?viewlocale=en_US&locale=en_US

  • How can I get a family member back after being removed from family share?

    How can I get a family member back after being removed from family share?

    See [[Replace your Sync information]] but read the cautions carefully.
    * also see [[firefox Sync is not working]]
    It is always a useful precaution to make manual bookmarks backups
    * see [[Backing up and restoring bookmarks]]
    The above article also explains about the autobookmark backups that firefox generates, but be sure to make manual backups as you work, it is very easy to overwrite the wrong set of backups.
    I am not entirely certain what firefox is doing in your case, perhaps the synced Netbook does not have the expected set of bookmarks on it.
    Presumably sync may be uninstalled or disabled like any other add-on
    *see [[Uninstalling add-ons]]

  • I have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder.

    i have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder. or sometimes appears the apple logo and than back again to the interrogation folder... Help please!!!!

    mcbsousa wrote:
    hm... Is there any chance of making the bootable usb file and send it by dropbox or something like that? than put it in a pen drive and connect to the mac??
    Sending by Dropbox where, To who, to what computer? As your does not start up.
    You need to take at least the OS disc to a work Mac computer and create DMG from the OS install disc then restore that DMG to USB thumb drive. Then you can boot the computer from that thumb drive and install the OS. That is if your hard drive is functioning correctly.
    Then you can use the App disc in the external CD/DVD drive to load up all the included Applications that come with your version of OS X.

  • I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?

    I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?
    All the information that I had input on Quicken is gone. I have to have the external hard drive that I use to back up to be able to use quicken now. It is as if it was erased from the laptop hardrive

    Try repairing permissions. My favorite way is with a utility called AppleJack. Info and download here. It's free. It only works when you boot in Single User Mode. When restarting or booting, hold down the Command key and S keys.
    You will get a very different startup screen that looks like the Terminal app has hijacked the screen. Just let the lines of text scroll by. When that happens you will get a text entry prompt. Type in "AppleJack" without the quotation marks.
    A DOS looking menu will appear. Choose 1 or d to run Disk Repair. If you get a message that Disk Repair found and corrected errors, run it again. Repeat until you get the "your disk appears to be ok" message. This rarely happens with my experience, though. This does the same thing as as booting from an external drive and running Disk Utility's repair. Only, no external drive is required!
    Next, choose 2 or p to repair disk permissions. This will take a little while. AppleJack warns that it will take up to an half hour to run repair permissions. It'n never taken more than about ten minutes for my MacBook Pro.
    As permissions are repaired, you will see each repair scroll on the screen. When done, the menu returns, choose q to quit. Then at the prompt, enter "exit" without the quotes. Your MacBook Pro should restart into Mac OS normally after this.
    Hope this helps.

  • I have a macbook pro with only 128gb of hard drive. I have lightroom installed and all my photos on an external hard drive. Can I store my lightroom library on the external hard drive too?

    I have a macbook pro with only 128gb of hard drive. I have lightroom installed and all my photos on an external hard drive. Can I store my lightroom library on the external hard drive too?

    Yes. Find the LR catalog file by looking in Edit/Catalog Settings/General. Close LR and navigate to that spot. The catalog file is the one that ends in .lrcat - move it to wherever you want. Next to the .lrcat file is a subfolder called Previews.lrdata. You can move that over as well, but if you don't LR will generate new previews. Double-click on the .lrcat file in its new home and LR will open with that catalog. Set Preferences to When Starting Up Use Most Recent Catalog.

  • Problem: I lost the option to get the sound from external speakers or headphones to upgrade to Lion 10.7.3. It accepts only internal speakers.  I downloaded  Combo directly. I followed all the advice from the Apple community

    Problem: I lost the option to get the sound from external speakers or headphones to upgrade to Lion 10.7.3. It accepts only internal speakers.  I downloaded  Combo directly , without using "Actualización de software". I followed all the advice from the Apple community.  Can I use bluetooth speakers to solve this problem?  My Computer: iMac. 20-inch, Early 2008. Processor 2.4 GHz Intel Core 2 Duo.

    You may need to reset PRAM/NVRAM.
    First, check that the jack is clean. Put some alcohol on a plug and insert it a few times. See if that helps.
    is your output both digital and analog? If digital, is the red laser light visible in the socket? Do not look directly into the socket when checking.
    If all else fails try a PRAM reset:
    Reset your computer’s PRAM
    A small amount of your computer’s memory, called “parameter random-access memory” or PRAM, stores certain settings in a location that Mac OS X can access quickly. The particular settings that are stored depend on your type of Mac and the types of devices connected to it. The settings include your designated startup disk, display resolution, speaker volume, and other information.
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
    DO NOT HOLD These keys beyond the second startup sound!
    Release the keys.
    Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.

  • I have a macbook pro and the software with snow leopard only has upgraded to 10.5.8, do I need to purchase mountain lion to upgrade to 10.6.8?

    I have a macbook pro and the software with snow leopard only has upgraded to 10.5.8, do I need to purchase mountain lion to upgrade to 10.6.8?

    Your machine likely can't handle Mountain Lion 10.8 nor 10.7, if it does it will run slow and very higly likely a lot of your third party software and drivers for printers and scanners won't function anymore.
    It's because your 10.5 era (or earlier) machine is rather dated, hardware has advanced and is faster, the newer OS X versions have gotten bloated.
    I do recommend you call Apple via phone and order the 10.6.3 white retail disks, backup your personal data off the 10.5.8 Mac to a external storage drive and when the disk arrives, stick it in and run the upgrade installer.
    Once that's finished, reboot and use Software Update to get to 10.6.8 and stay there. You can buy stuff from AppStore, just don't upgrade to 10.8 (or 10.7) as thats when you'll have issues.
    10.6 should run your currrently installed PPC software and hardware drivers. But 10.7/10.8 will not.
    10.6 is receiving security and other updates from Apple as more than 50% of OSX users are still on it.
    Most commonly used backup methods
    Things to consider before upgrading OS X

  • HT4437 My Apple Tv will only mirror the sound from a movie I mirrored from my computer, but not the picture.How do I fix that?

    My Apple Tv will only the mirror the sound from a movie I mirrored from my Macbook Pro. How do I get the picture?

    Do you have a valid credit card associated with the account? If so then I would contact iTunes

  • I saved photos from my Macbook Pro onto my Iphone (using itunes, 4 years ago). My macbook is now dead and I need to get the photos I saved off of my iphone 3GS transferred to a pc.  Any help...  From my PC I can only access "internal storage"

    I saved photos from my Macbook Pro onto my Iphone (using itunes, 4 years ago). My macbook is now dead and I need to get the photos I saved off of my iphone 3GS transferred to a pc.  Any help...  From my PC I can only access "internal storage"

    The iphone is not a storage/backup device.  The picture sycn is one way - computer to iphone.  The photos are also reduced in size when synced to iphone so they are not of the original quality
    It has always been very basic to always maintain a backup of your computer.
    Have you failed to do this?
    If so, not good at all, you can e-mail the pics to yourself - keep in mind they will never be of the original quality

Maybe you are looking for

  • Airdrop for Notes Not Available

    I am trying to send a note via Notes by Airdrop from my Macbook Pro Retina mid-2014 to an iPhone 5. I can see all the different options but Airdrop. I click on More and get the Extensions System Preference panel and the Share Menu. Airdrop is checked

  • Bapi Names For Following Fields?

    Hi All, I Want BAPI names For Following Fields. 1.Personnel Area. 2.Personnel SubArea. 3.PERNER 4.OBJID. 5.LAND1 6.REGIO Thanks SubbaRao Chinta

  • How to get the first 3 characters from the previous month?

    Hi, I need to get in a View Column only the first 3 characters of the previous month of data from the bellow query. SELECT ID, Department, Capital_Project_Number,  Capital_Site_Number,  Funding_Source, Milestone,  Account, Year, Month, Data FROM  Tab

  • Auto Increment for BP code in BP master

    Dear All, CAn any one provide FMS for autoincrement of BP as per following manner... For Customer : Code must start with C followed by the customer first alphabet and then "000" +1 for eg the code must be : CA0001, CA0002, CB0001....and so on Similar

  • Ps 7.2 password

    Hi , I have (another) serious problem with Portlet and Sun Portal 7.2 I'm able to retrieve user info such as name, email , password in my portlet. The question is: the userPassword attribute is crypted password like: {SSHA}49yIzLiU+r1gxXbz5HeyQ7KFZzW