I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused.
I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused. I can manually send and receive faxes but I can not do it through the computer.
Try deleting the printer, deleting the job queue and reinstalling the printer again.
Similar Messages
-
I received an Keynote update notice on my Mac Air. I updated and now can not get into my saved keynote docs. I am being asked to upgrade again and purchase the upgrade. Anyone else having this issue?
Try this repair, ensure you complete all the tasks and in the order shown:
1 delete all the iWork applications if you have them, not just Keynote, use Appcleaner from Mac Update to do this, its freeware
2 restart the Mac; Apple menu > restart
3 immediately after the start chime, press the shift key until you see the Apple symbol.
let it fully boot up, it will take longer as the OS is repairing the drive
4 when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
5 when complete, restart the Mac normally
6 install Keynote from the Mac App Store
Please report back to let us know if this helped. -
My time capsule stated that it was delayed in backing up so I decided to do a hard reset on the time capsule. Now I am getting a blinking orange light and I can not get it to go back to green. I have had to hard wire the modem into my computer for connection. I need some help please. Thank you.
Assuming it is not simply broken, a slowly flashing LED probably means the TC is not receiving an IP address from the modem. Make sure you power down your modem whenever you change what is connected to it.
Having to unplug the Ethernet cable from the TC and plugging it in to your Mac repeatedly so that you can communicate is tedious enough, but endeavor to add the power cycle exercise to that action. -
I am really angry that I get this message every time I try to update Itunes.
“The File ‘C:/documents and settings\DEAN\Local Settings\Application Data\Apple\Apple Software Update\itunes.msi’ is not a valid installation package for the product itunes. Try to find the installation package ‘itunes.msi’ in a folder from which you can install itunes.
What kind of gobbledegook is that? Are you or Microsoft crazy. Us computer users need simpler instructions. Or you need to write your programs so that they work.
Signed,
Frustrated Apple User
Dean Weaver“The File ‘C:/documents and settings\DEAN\Local Settings\Application Data\Apple\Apple Software Update\itunes.msi’ is not a valid installation package for the product itunes. Try to find the installation package ‘itunes.msi’ in a folder from which you can install itunes.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
My preview crashes every time I try to open it since the Maverick upgrade. Any thoughts?
The problem is with facebook, go to settings / facebook / your user name and delete your account, the do a hard reset (home+power for some seconds).
dont need to delete the facebook app! just delete your integrate account from settings
cheers! -
Every time I try to log in to the Mac App Store, I get red words saying "An unknown error has occurred" How do I fix this?
Try deleting the cache associated wi the App Store.
Quit the App Store if it's open.
Now open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy/paste: ~/Library/Caches/com.apple.appstore
Click Go then move the Cache.db file from the com.apple.Safari folder to the Trash.
Try the App Store. -
I have been unable to find out how to select the storyline where I want a clip inserted. Every time I try to insert a clip at the beginning of my project, it goes into the Title Storyline, not my primary one.
What does the instruction say? Are you pressing the Insert button? Are you using the W key? Are you tryin to drag into the storyline?
If you have a secondary storyline, make sure it's not selected when you do the edit. -
Hi there, I can't install Photoshop CC on my computer. The pop-up message directs me to press "Retry" every time I try to install the program. I'm a bit unsure of what to do from here. Any help is appreciated!
Thanks for your time and consideration!YOu have not provided any system info or other technical details, so we can't know.
Mylenium -
Every time i try to buy something from the AppStore on my iPad or iPhone 4S i cant because i most answer the security question but I don't remember my security question answer, when I try to go change it from my Apple account he ask me the security questions agin and I don't know the answer help plzzz, note: I can't call the apple support because I live in Saudi Arabia
If you don't see the 'send reset info' button on the page where you can change them then I assume that you don't have a rescue email address (which is not the same thing as an alternate email address) set up on your account. As you won't be able to add one until you can answer 2 of your questions, you will need to contact iTunes Support or Apple to get the questions reset. You could try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then try Apple ID Account Security
-
My SSD with a running Dreamweaver CS6 version crashed. Now a new SSD is installed and every time I try to reinstall DW CS6 the error " inconsistency in the installation programm database" (in german terms) occurs. I tried to delete everything concerning to CS6, rebootet and so on - nothing worked. Two hours later I tried to install DW 5.5 - that worked. Afterwards I tried again to install 6.0 - without success. Can anybody help?
Thank you for your answer. I could not find caps.db.
Meanwhile I solved the problem as follows: I searched for "dreamweaver" everywhere an deleted everything I could find. Then I searched for "CS6" and did the same. I guess there were around 20 or more places where I deleted directorys or files. Suddenly the installation did not stop at 2 % what it always did before and the installation was a success :-) It cost me more than 4 hours to figure that out and I did not find a really helping hint somewhere. Adobe itself I could not contact because I could not find an email adress or a phone number - poor support for such an expensive software. For luck I did not have to deliver something just in time. Lacking a useful support is a really poor, poor attitude of Adobe... I think I will not buy anymore Adobe products - it could cost too much of my time... :-( -
For some reason every time I try to buy something from the App Store I receive a message that says to contact apple support and I can't purchase anything what should I do?
iTunes Support -
http://www.apple.com/support/itunes/ -
I have a toshiba lap top computer with vista and I can not get my new iphone to connect all the way .... it says "connected with limited activity". which means I don't get on. Any help would be appreciated. Thanks.
Hi all,
Guess I understand what is going on as I'm also experiencing the problem.
Basically the issue is about the iPhone 4's personal hotspot.
I'm trying to hook on personal hotspot to my toshiba laptop but it couldnt work as the connection is limited to local only without Internet access.
The hotspot works well on other laptop and I-devices, but not my toshiba...
Hope to get assistance here. Thanks -
I had a google toolbar on my 3.6 firefox for at least one year . After my Mac crashed and I restarted everything it vanished and i can not get it back I tried to reinstall it does not work and when i go to add ons it tells me it is not available for 3.6 Firefox All my bookmarks re there (((
Yup, your question and Diane's answer helped me also. Tho' I had had problems before getting into the iTunes store I always managed to find a way. Today they had me blocked cold with the "Update to 10" advert no matter what I did. Other questioners are being told, incorrectly as it turns out, that they have to update their OS to accomodate iTunes 10 and upgrade to iTunes 10. I did the download which did not take up much more room on my crowded old hard drive and now I'm back in business.
-
I have Norton's security suite under the old version the Idenity protection worked. I kept all my passwords under this which used a master pasword I did not save my passwords any were else and now can not get it to work supplying passwords for my logon site.
Symantec need to correct a mistake they made with their add-ons. They originally updated their add-ons after quite a delay to work with Firefox 4.0 as shown here - http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-4-compatibility-hotfix-is-now-available/td-p/428894
They made an error with the update in only listing it as compatible with Firefox 4.0, so they will not install on Firefox 4.0.1 and subsequent Firefox security updates. Symantec have indicated they will be releasing an update to correct their error soon, for details see http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788/page/12 -
I am using my time capsule to back up and I can not get the green light, what should I do
Hi everyone
I posted a quesiton yesterday and when I got up this morning the time machine / capsule (not sure of the difference) had unlocked itself!. The other problem persists and that is that the amber light continues to flash and I can not get the macbook to talk to the time thingy.
Obviously I am not very good at these things and I live in a country where I-systems knows about as much as I do!
Thank you
GillianSo you have never actually used the airport utility.. you were almost there.
You posted this picture.
Screen+Shot+2013-03-15+at+13.20.55.png
Click edit button on that page.
Voila.. airport utility in all its manual setting glory.
Or install a decent utility.. 5.6.
This is not required but to my eyes.. it is much easier to understand and has more useful tool items than later versions.. which are made iOS pretty picture like.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0
Maybe you are looking for
-
What Configuration for Thinkpad T400 running Ubuntu 8.10 64-bit?
Hello, I will soon be assisting in the purchase of a new T400 for a friend of mine to use mainly for finishing up her Masters thesis on and also to use for her work as a teacher. She will be going from an old Dell latitude x300 (which died of course)
-
LWAP migration of AIR-1131AG-A failed bad mzip file
Hello Experts, I would like to connect a Cisco LWAP 1131AG-A-K9 with a WLC4402 running on 4.1.171.0 Unfortunately, the software downloaded from the WLC is not correctly unpacked on the AP. I can see an error on the console stating "bad mzip file". We
-
I can't access my gift card though the account balance is shown in window when I sign in to I store. When I try to purchase a song, site requests me to sign in for billing information. When I do this, it just keeps replacing the same window with sa
-
Hello all, I am replacing my old desktop and laptop with a new laptop that is better than both. I am a film student and I prefer to do my editing at home as opposed to the school so editing capabilities is a must. I own the Production CS5.5 and I wou
-
Ip sla monitoring on asa ver 7.0 (6)
how to configure ip sla monitoring on asa ver 7.0 (6) ?