I have a new iPad. I am using Comcast as my email provider but when I send a message, it pulls up the facebook email addresses for my  contacts  instead of the addresses stored in my comcast account.  How can I get rid of the Facebook email addresses? The

I have a new iPad. I am using Comcast as my email provider but when I send a message, it pulls up the facebook email addresses for my  contacts  instead of the addresses stored in my comcast account.  How can I get rid of the Facebook email addresses? The comcast addresses are stored in the comcast (xfinity) app.  I do not use the "mail" or "contacts" apps ....I go straight to comcast (xfinity).  I wish I could start over!!!  thanks.
iPad

I could be wrong, but it sounds like Facebook imported to your contacts.  I have the Xfinity app on my new ipad, too, but none of my stored contacts from the online version are showing, only what I manually entered into the iPads contacts are there.  When I did add the FB app, I did not grant it permission to push and pull from my ipad (not a fan of FB knowing every detail about me), so that may be where our difference lies.  You could try to open the app and change your privacy settings, or delete it and then reinstall without granting permissions to integrate.
I'm sure someone here with a lot more knowledge then me can probably diagnose your issue better, though.  Good luck!

Similar Messages

  • I want to switch stores from Japan to USA. I used to have an iTunes card, and there's 15 YEN left in my account, how can I get rid of that so I can start purchasing in the US store using my new credit card?

    I want to switch stores from Japan to USA. I used to have an iTunes card, and there's 15 YEN left in my account, how can I get rid of that so I can start purchasing in the US store using my new credit card?

    I can't seem to find an app that costs my available balance. iTunes said I need to spend it ALL before I can change stores. This means I cannot totally change stores.... Hopeless.

  • I have a rectangle with the word caption written twice on it which appears on my page and obscures my information - how can I get rid of this please?

    I have a rectangle with the word 'caption' written twice on it which appears on my page and obscures my information. How can I get rid of it please?

    Can you post the URL so we can test the page and look at its code?

  • How can i get rid of an old email i used as an apple id

    I had an old  email address i used as an apple id. I have a new one now but occasioally the email and id which i no longer have keeps popping up. how can i get rid of it from my iphone and ipad?

    Hi Chuck,
    If you are occasionally prompted for your previous Apple ID, you may find the following article helpful:
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/ts5223
    Regards,
    - Brenden

  • TS3899 How can I get rid of a wrong email count on inbox?

    I have set up my BT email account in settings, and it works fine.  Except that although the inbox if empty there's a constant icon on the home screen showing 13 emails in the box.  I can't get rid of this, even though I have set up the email twice now. What's going on and how can I get rid of the score when the box is empty?  It just counts up from 13.  (ipad mini)

    Thanks.
    I tried that, waited for the Apple to appear.  But when the home screen appeared - just the same.  So I deleted the account (bt internet).  Re-set as before.   Then set up the account again.  still have 13 emails showing and nothing in the in box.  Annoying.  I think this is because I delete some (13?) emails from the online access to the inbox (on a laptop) but it's out of synch with the ipad.  Neither account has any emails but the ipad thinks it's got 13 I have deleted.  But they are not there!!!
    Thanks anyway.

  • How can I get rid of "myV9" that suddenly appeared the other day when I started Firefox?

    Suddenly there was a portal site named "myv9" or "V9" on the screen when I started Firefox the other day. It contains a lot of icons for programs like Facebook, Google and so on. Until now I have had only Google as start page from Firefox. Of course I can click on the Google icon to get there, but it is the only site that I want to use of all these. Nearly all the other icons (except Facebook and some others) lead to specific US sites that I never visit (for example the weather forecast for North America) , because I live in Sweden. How can I get rid of "myv9"?
    Even if it doesn´t harm my computer, I am afraid that it will slow it down, and, besides, it needs an extra click to get to Google.
    Vidar Ferm, Sweden

    Do a malware check with some malware scanning programs on the Windows computer.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    *http://www.superantispyware.com/ - SuperAntispyware
    *http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
    *http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    *http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    You can also do a check for a rootkit infection with TDSSKiller.
    *http://support.kaspersky.com/viruses/solutions?qid=208280684
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • How can I get rid of desktop icon without deleting the actual item?

    Installed Seagate as time capsule. Icon on desktop. How can I get rid of icon from desktop without deleting the Seagate?

    In Finder -> Preferences you can tell it not to display mounted devices.

  • How can I get rid of Japanese tokens/signs in the tabnames?

    On top of the tab-sitenames are strange Japanese tokens on the righthand-side. I can't get rid of them, even restart does not work.
    It's only visible in Firefox, not in my other browsers!

    hello, this is a displaying flaw caused the mcafee site advisor extension - please try to disable or remove that in case you have it present until there is an update by mcafee that can fix the problem.
    http://service.mcafee.com/faqdocument.aspx?id=TS100162
    https://community.mcafee.com/thread/76071

  • How can I get rid of a small "thread" in the lower right corner of my new 27" Cinema Display?

    I recently acquired a new 27" Cinema display.  Yesterday I noticed a small thread like piece of debris under the glass on the lower right side of the display.  Any suggestions as to how I can get rid of it?  Take it to the Apple Store?  Return it for a replacement (which might have the same issue).

    Windows stuck in top left hand corner of screen

  • How can I get rid of a type generated by the Data/Services return type wizard?

    Hi All,
    I have a JSON service that returns an object called "error".  The Data/Services "Configure Return Type" wizard automatically turned this into a class "Error".
    However, this caused over a hundred errors to show up inside the generated classes, "Call to a possibly undefined method Error."  That's because of lines like this:
    throw new Error(propertyName + " is not a data property of entity Agreements"); 
    It's trying to throw a regular "Error" object, but now that there's an "Error" class in the same package, that is taking precedence--and that Error object doesn't have a constructor with a single parameter.  At least, that's what I think is going on.
    I tried to fix it by deleting _ErrorEntityMetadata.as, _Super_Error.as, and Error.as from the valueObjects package.  I then opened the FML file and deleted the definition for the entity "Error" and every reference to the Error entity (class) in my FML file.
    I then changed my JSON service so that it returns an object called "serviceError" instead of just "error".
    But, whenever I re-run the "Configure Return Type" wizard, it regenerates the Error class, even though I've deleted it from everywhere I can find it.  That breaks my project completely!  How can I end this and get Flash Builder to *stop* generating this type!
    In the "Configure Return Type" wizard I very carefully inspected the type of every bit of data coming back to make sure none of them show up as type "Error."  And they don't (as expected, since I changed the object's name to serviceError--now the type of that object is ServiceError.
      -Josh

    I think you are facing this known issue https://bugs.adobe.com/jira/browse/FB-29770
    Please vote it.
    Thanks for the link--I just voted for it.
    To avoid this, in the last page of "Configure Return Type", edit return type name to something else (You can also edit subnodes's name too in the wizard).
    Actually, that's exactly what I saw doing; I apologize if that wasn't clear in my post.
    I closed and restarted Flash Builder, and once I did that Flash Builder stopped generating the Error class.  My guess is that the FML file, even though I had updated it (by deleting all references to the Error class), was cached in some fashion by Flash Builder, and restarting Flash Builder forced it to reread the FML file?
    Additional point of clarification: my understanding is that the FML file stores all the metadata about the services that Flash Builder has been able to figure out so far, and when you run the Configure Return Type wizard, it will regenerate *every* type in the FML file, even if that type is not mentioned anywhere in the particular return value that you are working with.
    Edited to provide additional thoughts on FML file.

  • How can I get rid of Apple Maps and Put the Google Maps back?

    I wanted to know how to remove the Apple Maps and reinstall the Google Maps. The Apple Maps is a very inferior programme and not worth the space on the. Computer. It can't find anything. It's a complete waste of time.
    So my original question is, how to get rid of it, and put the Google Maps back?

    CHances are google maps are never coming back as part of the bundled OS. Apple and Google seem to have parted ways (possibly has something to do with Google having their apps on other devices from other manufacturers but no one knows for sure)
    Since preinstalled apps cannot be deleted, the most you can do is ignore the icon, shove it back on a back menu page (I have a 4th menu page on my iPad containing nothing but the bundled apps I consider worthless. I just ignore that page and never go there) and then put a shortcut to google maps on your iPad or find a third party map app you like better.

  • How can i get rid of a black speck behind the screen?

    Brand new, quad 2.8 GHZ Intel iMac. Beautiful. But has a black speck in the screen. How on earth would i get rid of this? I'm quite positive it's not on the screen. i've wiped it very firmly w/ the cloth provided. the thing is simply on the other side. Ideas?

    Hi Peter,
    If you can take it back to the Apple store (assuming you bought it from one). I had similar with a 24" iMac last year and they just replaced it there and then no questions, no arguing. They even transferred all my Data to the new machine. It was hassle free and I walked out of the store with a brand new replacement iMac set up like my original machine.
    Don't try doing anything to it yourself if it is brand new, it will void your warranty.
    Paul

  • I have a Macbook Pro 15" and Canon LBP7750Cdn printer. How can i get rid of a ip assigned to the printer previously because it clashed with another device?

    I have canon lbp7750cdn printer. i assigned ip 192.168.1.50 to it to install as network printer. after a few unsuccessful attempts realised the ip was already assigned elsewhere, hence changed ip to 192.168.1.60 and the printer worked. but now when i want to run printer monitor utility (which is part of driver used 
    - lbp7750cdn UFR II uk} it cant load info because it is looking for printer with first ip. { the monitor utility gives status of supplies. thanx in advance for help. Noor.

    Back up all data. Rebuild the mailbox. Try again to delete the message.

  • How can I get rid of (404) screen and browse the web

    This morning I foundthat I was able to log on to mozilla, get my e mail, bring up the yahoo home page, but I could not browse the web. I am getting an error screen that says (404). I have never had this before and my tech support was unable to help me.

    CHances are google maps are never coming back as part of the bundled OS. Apple and Google seem to have parted ways (possibly has something to do with Google having their apps on other devices from other manufacturers but no one knows for sure)
    Since preinstalled apps cannot be deleted, the most you can do is ignore the icon, shove it back on a back menu page (I have a 4th menu page on my iPad containing nothing but the bundled apps I consider worthless. I just ignore that page and never go there) and then put a shortcut to google maps on your iPad or find a third party map app you like better.

  • How can I get rid of these grey lines in the background of my pages documents?

    I bought an app out of the store that game me new templates to use in pages. I used one of the templates in making invitations for my little cousins birthday party but now there are these grey lines in the background that I cant get to go away. any suggestiions?
    thanks!

    "the store", "these grey lines"? You realise we can't see what you see. Could you describe the problem and the templates better? If you bought the templates from the MAS, which ones are they?
    Perhaps they are just locked objects.
    Can you click on them?
    Menu > Arrange > Unlock
    They may also be master objects:
    Menu > Format > Advanced > Make Master Objects selectable
    Peter

Maybe you are looking for

  • A/P Down Payment Invoice error....

    Hi all.... Please Help me... I done all setup relevant to Vendor/Supplier for Business Partner Data........... But whan I am creating A/PDown payment Invoice I got error... In Vendor AP Down Payment Invoice I got error i.e "No Matching Records Found"

  • SD selection button of BP is inactive

    Hi Experts, I have a problem with selection sales data of BP, I have all done to replicate Customer main data. But I cant select the Sales data from BP, The selection button is inactive and, comboboxes empty. CRMC_R3_ORG_GENERATE generated true SD or

  • How to change or Switch - scroll direction - automatic using registry keys

    how to change or Switch - scroll direction on TouchPad Synaptics - automatic using registry keys   ?

  • PayPal Chained Payments integration

    Hi all, I'm trying to use PayPal to integrate Chained Payments, but can't get it to work. Has anyone experience with this feature of PayPal and Apex? The Express Payments are working well, but that is not what we need... Regards, Jan

  • No messages showing in RWB

    Hello everyone! I'm trying to test sending messages in RWB > Component Monitoring > Integration Engine > Test Message ... However, when I give all the necessary paramters plus the payload, I can't seem to find any messages showing in the message moni