I have a new ipod nano;  it won't sinc after i plug in and connect to itunes;  i've done this many times, but this time it doesn't work (with the new one);  suggestions?

any help is appreicated in helping me figure out how to sinc my new ipod nano;  i'm trying to do it the way i've done it many times in the past, but this timeit won't sinc.  Suggestions?

Because the Nano was previous synced to another comuter/iTunes library.
See the following:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Similar Messages

  • I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive.  Some manufacturers of drives aren't for sure their drive will work with the new lion system. Does anybody have any suggestions for drives that will workw

    I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive.  Some manufacturers of drives aren't for sure their drive will work with the new  system. Does anybody have any suggestions for drives that will workw

    There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
    Clinton

  • The sync doesn't work with the new version

    Hi, I have a Macbook version 10.4.11 I just to work with the  pocketmac for blackberry former version and It use to work great but since I did upgrade to the new version they system doesn't sync any contact, meeting....
    The system recognize my Blackberry  PIN and the status is "available" but nothing happens.
    Any suggestion?
    Thanks 

    I tried a whole slew of things and did manage to get it to sync by syncing each component one by one just to see if there was a problem area such as tasks or notes. That went fine but when I tried to do a full sync will all the components I need the sync would run and then then PocketMac would freeze and crash. Yesterday I decided I had spent more than enough time on this and bought MissingSync. So far it's great.

  • Waves plugins doesn't work with the new Logic X?

    All of my Waves plugins included in the Complete V9 bundle doesn't appear with the "upgrade" to Logic X. Even I re-installing the plugins Logic X seems to ignore them...
    Someone with this problem? Anyway to solve that?

    AndersonPiah
    For Waves v9 64bit version..
    Did you also run  the Waves AU Reg Utility 9.2 or later.. found in the applications/waves/waveshells folder?
    If not, quit LPX and run the AU reg util.
    Then, restart LPX and V9 should then be validated correctly and available in LPX via the Insert FX slots.
    Waves V9 working fine here with LPX and 10.8.4
    Salvarado,
    As zbaig stated, you need to update to Waves v9 64bit... as v8 was 32bit only and is no longer supported within Logic Pro X

  • The character count when sending a message doesn't work with the new iOS 5.

    Hi,
    After I upgraded to the new iOS 5, the message counter no longer appears.  I've gone into the settings to verify that it is turned on. I've turned it off and then back on. I've rebooted the phone, but to no avail.  Has anyone else encountered this new "feature"?
    Thanks,
    Allan

    The only way I can get character count back is to disable both iMessage and MMS.  I agree it is annoying.  iMessage only works between iOS 5 devices, and since the whole world does not use Apple products, it's not like I still won't be sending plain old SMS text messages to people.  If you type more then the SMS character limit, AT&T still happily sends it, their servers just truncate it, so the character count feature is hardly an outdated or pointless feature.
    I have been sending fewer and fewer texts though anyway, and using email instead. but this just pushes me further away from texting.  Most of my work texts are to blackberry users, so no iMessaging with them, but having to go back and forth into settings to enable/disable iMessage means I will likely just leave iMessage off all the time anyway.

  • I have avast antivirus. When I got a note that my avast doesn't work with the new version of firefox. When I check Avast it says I am protected. I'm confused.

    I recently updated my version of firefox and I got a message that my avast antivirus software was not supported by the new version of firefox. when I checked my avast it indicated that I was still protected. However, I've noticed that the avast is not downloading new antivirus signatures like it used to. Is my avast working?

    You can look at the new pre-release version of Avast for Firefox 5.
    * http://forum.avast.com/index.php?topic=80362.0

  • [SOLVED] CPU scaling doesn't work with the new kernel

    I just updated my kernel to 2.6.16.1-7, but now my CPU scaling doesn't work anymore.
    root@vanessa ~# modprobe cpufreq_userspace
    root@vanessa ~# modprobe speedstep_centrino
    FATAL: Error inserting speedstep_centrino (/lib/modules/2.6.16-ARCH/kernel/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.ko): Unknown symbol in module, or unknown parameter (see dmesg)
    and the last line of dmesg:
    speedstep_centrino: Unknown symbol acpi_processor_preregister_performance
    Any ideas? Looks like this is an error in the speedstep_centrino module.. bit. As far as I know I hadn't this error with the -6 kernel package..

    did you anything else except update your kernel version? because the problem isn't gone away here
    [cagnulein@cagnulein ~]$ sudo modprobe speedstep_centrino
    Password:
    FATAL: Error inserting speedstep_centrino (/lib/modules/2.6.16-ARCH/kernel/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.ko): No such device
    and powernowd
    [cagnulein@cagnulein ~]$ sudo /etc/rc.d/powernowd start
    :: Starting Powernowd [BUSY]
    powernowd: PowerNow Daemon v0.97, (c) 2003-2006 John Clemens
    powernowd: Found 1 scalable unit: -- 1 'CPU' per scalable unit
    /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq: No such file or directory
    PowerNowd encountered and error and could not start.
    Please make sure that:
    - You are running a v2.6.7 kernel or later
    - That you have sysfs mounted /sys
    - That you have the core cpufreq and cpufreq-userspace
    modules loaded into your kernel
    - That you have the cpufreq driver for your cpu loaded,
    (for example: powernow-k7), and that it works. Check
    'dmesg' for errors.
    If all of the above are true, and you still have problems,
    please email the author: [email protected]
    [FAIL]

  • MY new Ipod Nano does not hold a charge.  I use it mostly as a watch, perhaps look at it 5 or 6 times in 8 hours, and leave it in sleep mode the rest of the time.  I drains to the red line in less than 2 days.  My husband's nano will last a week this way.

    MY new Ipod Nano does not hold a charge.  I use it mostly as a watch, perhaps look at it 5 or 6 times in 8 hours, and leave it in sleep mode the rest of the time.  I drains to the red line in less than 2 days.  My husband's nano will last a week this way.  I thought it drained because of looking at photos, so I quit looking at them and it made no difference.  Am I doing something incorrectly to cause this short battery life?

    You are still under warranty if your iPod is "new."  Take full advantage of it by either calling iPod tech support, Apple Care if you have it or take it in to an Apple store or an AASP.  Whichever is more convenient for you.

  • No sound through headphones on new iPod Nano 7th. Latest software version has been downloaded and music has been synced from library.

    No sound coming through headphones on new iPod nano 7th.  Music has been synced from library, and latest software downloaded.

    hi there,
    it sounds like you have just defective speakers ( or connector issue ). better to contact support for replacement.

  • My head phone jack isn't working. Only works with the new headphones that have three rings at the bottom. My regular ones with two rings don't work with the computer anymore. Anyone know a fix?

    My head phone jack isn't working. Only works with the new headphones that have three rings at the bottom. My regular ones with two rings don't work with the computer anymore. Anyone know a fix? Ive tried reseting my computer and that didnt work

    Get the new keyboard at eBay and replace by yourself may be cheaper way, though you're required higher skill and well know about MacBook Air.
    http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0 .Xmacbook+air+2011+keyboard&_nkw=macbook+air+2011+keyboard&_sacat=0
    https://www.youtube.com/watch?v=gLbasVD69xo

  • Does ipad 2 dock work with the new ipad

    anyone know if the IPad 2 dock works with the new IPad?

    Apple's cable with a 30-pin connector on one end & USB connector on the other end works on all iPad models, iPhones & iPods.
     Cheers, Tom

  • IPod Stuff doesn't work with my new iPhone

    I finally sprung for the iPhone three weeks ago and I love it. But I think I'm going to have to buy more new stuff. Neither set of my portable speakers that I use with my iPod (5th gen. video) work with the iPhone. When I put the iPhone in the dock, I get some message about Airplane Mode. Music does play through the speakers, but they won't charge the iPhone. When I put the iPhone on its own charger and tried to use the auxiliary input on the speakers, there was only silence.
    Do I need a special cable or something?
    Also, my car charger for the iPod doesn't work with the iPhone.
    Am I going to have to spring for another set of portable speakers? I've read that the Pure-Fi is compatible with iPhone.
    Thanks!

    Both my mini and my video iPod were USB -- not Firewire.
    Both your Mini and your iPod with video synced via USB and charged via USB when connected to your Mac, but they also support charging via Firewire and most of the older 3rd party devices charged iPods via Firewire - your iPods include firewire pins in the connector for charging via firewire.
    The first generation iPhone also syncs and charges via USB when connected to a computer, and the first generation iPhone also includes firewire pins for charging via firewire also, as your iPods include. The first generation iPhone does not support syncing via Firewire, but it does support charging via Firewire.
    Apple removed the firepins from the iPhone 3G connector as they have done with all new iPods released after a certain date and for all new iPods to be released in the future. 3rd party device manufacturers were made aware of this so all new 3rd party devices must support charging via USB only or include charging via USB in addition to charging via Firewire if a new device is to be backwards compatible with older iPods.

  • My iMessage no longer works with the new is07 update how do I fix this

    My iMessage and some of my applications no longer work with the new software update. How do I fix this?

    I called Apple Support after trying many fixes suggested online. They directed me to the procedure on the following page:
    http://support.apple.com/kb/TS4268?viewlocale=en_US
    I did the erase and restore option they suggested since I had tried a pile of ther things suggested on posts and blogs and they did not work. I even waited the obligatory 24 hours, thus the restore from backup option was what they suggested. I have a 64gig iPhone 4S and it took about 1.5 hours to complete the entire operation seeing that I am using about 54 gigs of that capacity.
    Warning: I lost all of my emails and all of the data files from one of my map programs so be sure you have everything that you really need from your phone store elsewhere before wiping your phone. I thought that the backup on my computer would restore everything but obviously NOT.
    Hope this helps.

  • Fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue

    fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue Asked this question yesterday. I desperately need info, will I ever be able to use fast dial again?

    I tried it and it WORKED....I even tried the other version BEFORE this one and it didn't work so I tried yours and it worked like a charm so THANKS brother....

  • The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

    The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

    Why should Apple fix the problem? Maybe you should consider NOT upgrading if an expensive piece of (obsolete) software you're running won't work with it...

Maybe you are looking for