I have a new Mac Pro. I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro. How do I set up the old computer?
I have a new Mac Pro. I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro. How do I set up the old computer? Both computers have OS X10.9.3. Currently they are connected by a Firewire 800 cable.
You certainly could keep the old Mac Pro in Firewire mode (hold down the T key on its keyboard as you boot) to show its drives on the new MP. This is basically as fast as putting the drives into a Firewire enclosure.
Or you could boot it normally and share its files over the network using the Sharing panel of System Preferences. If you turn on both File and Screen Sharing, you don't even need to have a monitor attached - you can do all administration using screen sharing. However, this method requires that you open all files over the network, which will be slower than the direct-connect method above, and may also not work with all applications.
Matt
Similar Messages
-
Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub that serves as a good router. 3gb or 4gb capacity preferred but 2 would suffice.
Plug a NAS into the BT Hub that does TM. Look at Synology.
You just use the wireless of the hub.
But the cheapest solution is still the TC. -
I want to use a fantom diamond as an external hard drive for my mac, is this a good idea?
Using a Macbook pro, with Snow Leopard (I think), and my memory is full so I want to store my stuff on an external hard drive. I found a 2T Fantom Diamond EHD, but I'm now learning that I have to convert to NTFS-3g. I'm not computer savy so I want to know if this is a good idea, or should I look for something different. Also, can I set up the EHD as the default path for itunes?
This is not the forum for MacBook Pro owners.
You just need to reformat the drive in Disk Utility and erase the drive and have Mac HFS.
If you did need to use NTFS then you would not want -3G but Paragon NTFS for OS X x. 10.0
Or buy something that isn't pre-formatted to Windows NT file system.
First though make sure you have backups of your system. TimeMachine being used now?
http://macperformanceguide.com/Mac-TimeMachine-drive.html
http://www.apple.com/support/timemachine/
Maybe cleanout some files you don't need.
Install a larger notebook hard drive even.
http://www.macsales.com/firewire has a lot of choice in Mac compatible drives and enclosures so you don't need to worry about Fantom not working at some point.
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard -
I have a 2012 iMac running Mavericks, booting off of a external 4TB thunderbolt drive and using a separate 4TB USB drive for my pictures. I want to back up each of the drives to two USB 4TB drives with Time Machine. I cannot seem to figure out how to have multiple sources with multiple destinations.
Hello Randy,
Try excluding the drive in Time Machine settings. Take a look at the article below to go through and remove the exclusion of the external drive so that can be backed up as well.
OS X Mavericks: Exclude items from a Time Machine backup
http://support.apple.com/kb/PH14182
Regards,
-Norm G. -
I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
a. wired?
b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thankssgetraer wrote:
I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
a. wired?
b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks
1. Because it is either the same IP as the new one or hidden by being plugged in as a second router.
To access it, isolate one computer from the existing network and plug it directly by ethernet to a lan port of the TC. Use the erase function in the TC to remove all the content of the hard disk.
Then go to the internet tab, connection sharing and select off bridged. You can then reconnect the TC to the network.. and the computer as well. The TC will act as bridged device.. getting IP from the main router and should then appear correctly in Airport utility.
2. I covered in 1. But you just go in airport utility manual setup. disk, and you will see the erase function. You can also set it to bridge and leave the erase until you put it back in the network.. but be careful you erase the right one.
3. You can use the old TC via wired or wireless.. although I would always stick to wired connection if possible. Speed on wireless is 10x worse than wired.
Also note the reliability goes down dramatically after 2 years.. a series 1 3 years old or more is ebay fodder unless you want to repair it. Do not trust vital data to it.. when it dies you will have issues recovering it.
4. Yes, all apple routers will function as wireless extenders. when you do that the ethernet ports turn off so it becomes a purely wireless device.. strange apple decision on what you want to use your TC for. -
I have about 80,000 photos on my Mac. I wanted to use icloud. I needed to download the newer version so, for 14.99 I downloaded. Problem is, now I have lost my photos! I tried 3x to but it always stops working. HELP!
What version of iPhoto did you have before upgrading to Mavericks and iPhoto 9.5?
OT -
How do I set up the email on the my new MacBook Pro to receive "me" email
how do I set up the email on the my new MacBook Pro to receive "me" email on my Mac. I would like to use Entourage if possible but anything would be good.
I am not sure this is the right place but I could not figure out where else to post an email ( [email protected] ) question.
Thanks!
MartinHi Martin,
MobileMe Mail Help: Setting up Mac OS X Mail to receive your MobileMe email
The steps you follow to set up Mac OS X Mail to receive your MobileMe email depend on which version of Mac OS you’re using.
Important: For the instruction below, use the following: MobileMe Mail’s incoming mail server is “mail.me.com” and the outgoing mail server it “smtp.me.com.”
To set up Mac OS X Mail to receive MobileMe mail:
If you’re using Mac OS X version 10.4.11 or later
Open System Preferences (under the Apple icon at the upper-left of your computer screen).
Click MobileMe (if you have Mac OS X version 10.5.3 or later), or .Mac (if using version 10.4.11 to 10.5.2), and enter your MobileMe member name and password.
Open Mac OS X Mail, choose Mail > Preferences, and then click Accounts.
Click the Add button at the lower-left of the Accounts pane. Choose MobileMe from the Account Type pop-up menu, and then enter your account information.
The member name and password you use for SMTP authentication must match the member name and password in the User Name and Password fields.
To switch to POP, delete the existing IMAP account before you create the new POP account. Choose POP Account from the Account Type pop-up menu instead of MobileMe Account. -
When my daughter got her first iphone we set it up with my email address, she now has her own email & new iphone. I want to use my email address for my icloud, can I delete the content from the icloud account and continue to use my email?
Yes, but be sure she is on a separate iCloud account with a separate ID before deleting anything. Be sure there is nothing that you want to keep on your device too. When you delete the data from iCloud it will be deleted from all devices signed into the account. Then you can delete the data from the existing account by doing the following:
To delete the contacts, go to iCloud.com from your computer, log into your iCloud account and open Contacts, click on All Contacts on the left, to the right click on any single contact to select it, click on the Actions (gear shaped) icon at the bottom left and choose Select All, then press the Delete key on your keyboard.
For Calendars, open the calendar on icloud.com, click Edit on the bottom left, then tap the minus sign to the right of each calendar to delete it.
For Notes, open notes on icloud.com, click on each note on the left, then click Delete at the top to delete it.
For Reminders, open reminders on icloud.com, click on each reminder and press your Delete key to delete it.
For Mail, open your mail on icloud.com, click each folder on the left (such as your inbox), click on a single message to the right, press Control-A on your keyboard to select them all, then press your Delete key. Repeat this for each of your mail folders except Trash. When finished, click on the actions (gear-shaped) icon on the bottom left and select Empty Trash.
If you also want to delete your iCloud backups you can go to Settings>iCloud>Storage & Backup>Manage Storage on your device, tap the name of your device under Backups, then tap Delete Backup. -
I got a new iphone but the laptop I used to set up the old phone died, so now all I have is an iPad. How do I get my apps, contacts etc on to my new phone?
sign in with your apple id on the new phone, then go to app store - update - purchase - all/not on this phone and hit the cloud next to the app to downlaod.
-
I bought the photoshop install online and I put it on my laptop. But now I have a new and better computer for photo and video but I can not figure out how to reinstall my photoshop on this new computer. When I bought it, they said I would be able to install it on 2 different computers. PS they are both PC computers.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'. -
I just purchased an iPod Touch
for my 4 yr old grandson so that we can FaceTime. I have the ipad2. How do I set up the iPod so that we can FaceTime? The way I have it now shows me on both so it's a busy signal.You will probably need to create an apple Id for you grandson, so you can call that ID instead of yours.
take a look at the link http://support.apple.com/kb/HT4319 -
after hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access. -
I have a laptop Mac and an Ipad, and would like to transfer pictures, videos, etc from the ipad to the Mac but not from the Mac to the Ipad, how can I set up the iCloud in both devises to do so?
Welcome to the Apple Community.
Your best method would be to connect via USB and transfer that way, since videos are not transferred using photostream.
However you can stop photos on your mac being added to photostream in the iPhoto preferences > photostream by unchecking the automatic upload box. -
I've used iMessage for abit now and latly my step dad has got an ipad that is now joint to the same computer and on his ipad is my number and the email for imessage and i want to no how to get it of fully and not just untick it?
Hi barryfromwarrington,
Welcome to the Support Communities! There are two things I can think of to keep your Stepdad's information separate from yours on the computer and the iPad. On the computer, he should have his own administrative account, and on the iPad he needs his own Apple ID for iTunes and iCloud services. Here is some basic information to get started. I don't know if you have a Mac or Windows computer, so I'll include info for both.)
OS X Yosemite: Set up users on your Mac
http://support.apple.com/kb/PH18891
OS X Yosemite: Set up users on your Mac
If your Mac has multiple users, you should set up an account for each person so he or she can personalize settings and options without affecting other users.
Add a user
Choose Apple menu > System Preferences, then click Users & Groups.
Click the lock icon to unlock it, then enter an administrator name and password.
Click Add below the list of users.
Click the New Account pop-up menu, then choose a type of user.
administrator: An administrator can add and manage other users, install apps, and change settings.
Enter a full name for the new user. An account name is generated automatically. To use a different account name, enter it now—you can’t change it later.
Enter a password for the user, then enter it again to verify. Using a password hint is recommended to help the user remember his or her password.
Click Create User.
For an administrator, select “Allow user to administer this computer.”
Last Modified: Nov 18, 2014
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
http://support.apple.com/en-us/HT203206
Follow the steps below to create a new user account in Windows Vista or Windows 7:
Choose Start > Control Panel.
Open "Add or remove user accounts." (If you're using the Classic view in Windows Vista, open "User Accounts," and then open "Manage another account.")
Select "Create a new account" and follow the instructions to set up the account.
Once you create the new account, choose Start > Log Off.
Log in to the new user account.
Open iTunes and see if the issue you're experiencing persists in this new user account.
Frequently asked questions about Apple ID - Apple Support
http://support.apple.com/en-us/HT204161
iCloud: Set up iCloud
http://support.apple.com/kb/PH2609
Cheers,
- Judy -
Several months ago I installed the Firefox Home app on my iPhone to sync the bookmarks that I had on my Windows XP home computer. It has worked just fine until a few days ago. Just recently I was notified that the app would no longer work because of changes that have been made. I have tried to follow the instructions that were emailed to me regarding how to setup the new Firefox Sync add-on, but I am having a problem. After downloading Mozilla Firefox 4.0 Beta to my desktop and restarting my computer, I do not receive any prompts to create an account with a password and a secret phrase, as the instructions specify. How do I set up the account if the prompt never shows up?
Click on the Firefox button then select Options to open the Options dialog. Now go to the Sync panel for the option to setup a new account.
Maybe you are looking for
-
I have a new MAC PC with an old IPod Touch that was synch to my old desktop, how do I get the new music on my new MAC if I might have had an old account?
-
Migrating C/C++Development environment from Solaris 6 OS to Solaris 10 OS.
Hi, I have several questions. Hope i can get some advises. I am tasks to do a migration for my current Development environment from Solaris 6 OS to Solaris 10 OS. Current Scenaros: ============= My Development environment is on Solaris 6 OS machine (
-
I am building a webcenter portal using Oracle Webcenter 11.1.1.1.5 and deploying on Oracle Weblogic Server 11g. Please suggest what is the best practice to use for application debug logs. Should I use log4j or Apache commons library? Is it possible t
-
Transfer rules to the new source system not visible in Transport connection
Dear All, Recently our source system has been changed from R3 4.7 to ECC 6.O. Corresponding to that all the activities in BI have finished successfully. All my datasources in 4.7 have been replicated in ECC 6 in BI and transfer rules re-assigned. I h
-
Get an error when reading XML?
When I try to read from a XML file like this: DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance(); DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder(); Document m_doc = docBuilder.parse("formular/faktura.xm