I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel?

I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel? Is Parallel in fact the best way to go?

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Similar Messages

  • I have a new MacBook Pro with iPhoto installed.  I edit photos, mainly photo orientation via rotating, but when I go back to run a slideshow the changes weren't saved and the photo is back to vertical...please help...thanks

    I have a new MacBook Pro with Iphoto installed when purchased.  When editing a photo, primarily orientation changes, the slideshow initially displays the photos in proper orientation.  However, after leaving Iphoto and shutting down the computer, and then going back to run a slideshow the photo displays back to its' original orientation, that is, the edit-change was not saved.  Please help...the program information says all edit-changes are automatically save and therefore there is no save command, but my changes are not being saved...thank you for any suggestions...HM

    what version of iPhoto and of the OS?
    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
    LN

  • I have a new macbook pro, just downloaded some updates and when I clicked to restart it went to a grey screen and is not restarting.

    I have a new macbook pro 17". Just downloaded some updates (10.7.1, itunes etc.) and when I clicked to restart, went to grey screen and unit is not responding. It has been about 30 min.

    Hi j,
    Gray Screen at Startup (try Safe Boot)
    http://support.apple.com/kb/TS2570

  • I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing.  There is a check box selecting "picture" which has been checked - but no picture.  This worked fine on OS10.7.5.  Problem??

    I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing.  There is a check box selecting "picture" which has been checked - but no picture.  This worked fine on OS10.7.5.  Problem??

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • I have a new MacBook Pro.  I keep getting the message (from all different programs) that they would like to access the keychain "login".  I have run keychain repair, and it won't stop!

    I have a new MacBook Pro.  I keep getting the message "Mail would like to use your keychain "login".  How can I make this stop?  I have run the keychain repair utility.

    Hi,
    With the Finder as the Front app go to the Go Menu > GO to Folder.
    Copy and Paste the bold text below into the text field
    ~/Library/Keychains
    Highlight the Keychain.
    Use the CMD + i Keys together (Keystrokes for Get Info from the File Menu)
    In the Info Panel that appears check the Ownership and Permission bit at the bottom.
    Example Pic
    Unlock Padlock
    Check your Shortmname Appears (the (Me) one).
    Open the Cogwheel icon
    If it is Greyed Out to "Make "Shortname (Me)" owner then you are the Owner.
    Check you have Read and Write Permissions.
    You may need to check the Ownership and Permission on the ~/Library itself (you can do the same Get Info on Folders as well as Files)
    If you don't Own it then, when you have changed that also Apply to Contents.
    10:12 PM      Tuesday; August 23, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I have a new Macbook Pro and an old Canon ip Pixma 8500. I have downloaded the software from Canon but my printer settings will still not register it. Looks like I can print a colour calendar but not a letter!

    I have a new Macbook Pro and an old Canon ip Pixma 8500. I have downloaded the software from Canon but my printer settings will still not register it. Looks like I can print a colour calendar but not a letter!

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • HT3967 I have a new MacBook Pro and need to know what I need to do to open Microsoft Office files so that I can work on them?

    I have a new MacBook Pro and need to know what I need to do to open Microsoft Office files?

    Use a product such as OpenOffice, LibreOffice, Google Docs, iWork, or Microsoft Office 2008 or newer. In the case of Word documents, you can also use TextEdit.
    (82026)

  • I have a new MacBook Pro, and when I try to print, the laptop says, "stopped filter failed 1 page". What can I do?

    I have a new MacBook Pro, and when I try to print, the laptop says, "stopped filter failed 1 page". What can I do?

    Okay, regarding this problem:
    I'm trying to print to an Advent AW10 printer from an Imac running Yosemite 10.10.1 and it's been driving me nuts for the last two months...
    I got on to Advent yesterday and recieved this instruction from their support team this morning and it worked and I'm now printing away merrily:
    Please follow below steps:
    In Spotlight search window type Terminal and then press Enter.
    This should bring up the terminal window/program.
    In the Terminal type:
    sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf' then press Enter.
    It will ask for your password. Please enter system password.(You will not see password entering)
    After that type following:
    sudo launchctl stop org.cups.cupsd then press Enter.
    Try Printing.
    I don't think this is specific to Advent and is rather simply an 'opening up' of something blocking the 'printer channels' (layman's terms obviously)
    Hope this helps people out!

  • I have a new macBook Pro 15 and need to purchase best, easiest usb for backup - help please

    I have a new MacBook Pro 15" and need to purchase the easiest, cost-effective USB for backup.  I have never done a backup and don't know what to buy.  Thanks much from an obvious novice.

    Look at these two links to OWC products.  Note that one is for enclosures only so an appropriate HDD would have to be added.  This at least should give you an idea of what is available.
    http://eshop.macsales.com/shop/USB2/OWC_Express
    http://eshop.macsales.com/shop/firewire/on-the-go
    Ciao.

  • What is best all in one printer for my new MacBook Pro ? Needs to make very high quality photos.

    What is best all in one printer for my new MacBook Pro ? Needs to make very high quality photos. Using USB connection.

    That's a difficult one but I'd always go for HP as they make so many excellent models that you'll always be able to buy the cartridges from almost anyone.  Theyre darn good printer too.  I have four in the office here and one of them is a very neat flatbed with exceptionally high tonal qualities.  One of their cheaper models is the HP 5520 A4 inkjet all-in-one - CMYK.  Good value at £70 and 4800 x 1200 DPI. 

  • I have a new macbook pro and just made a video on imovie and it asked me to put it on idvd but there is no idvd listed as an option. How can I get idvd?

    I have a new macbook pro and just made a video on imovie and it asked me to put it on idvd but there is no idvd listed as an option. How can i get idvd. it doesn't seem available

    Since Apple has stopped supporting and offering iDVD you'll need to purchase the iLIfe 11 disk from a 3rd party retailer like Amazon.com: iLife 11 which will include iDVD 7. 
    OT

  • I have a new macbook pro hooked up to a belkin wireless router. My HP officejet printer is also connected to the router. I cannont get the printer to work from my computer without restarting my computer evertime I want to print. How do I fix this?

    I have a new Macbook Pro hooked up to a new Belkin wireless router. I can connect to the internet without a problem. I have an HP officejet printer hooked up the the router to work wirelessley, The router is reading it as connected. My computer reads it as offline. If I reset my computer it will print whatever the first thing is in the que but nothing else and does not work after that. Is there some sort of setting that I am missing? I am trying to set this printer up to work wirelessly from three mac laptops in my house but I can't even get it to work on one right now. Any help would be awesome

    Mac OS X 10.7 Help: Troubleshoot a network printer

  • I have the new macbook pro from late 2011. when i try plugging my cannon gl2 into the mac via firewire 800 it does not show up in iMovie as an option to import from. i even have gone into my settings on the camera and changed it to vcr.

    I have the new MacBook Pro from late 2011. "the one before the new ritina display" i have a cannon gl2 video camera which is mini dv. when i plug it into my mac via firwire 800 it does not show up in the iMovie. i have set the settings on the camera to vcr mode and changed it to av->dv out. when i click on the import from camera on imovie it doesnt even show my camera in it. it just gives me the option to import video from my facetime camera. the camera is turned on the wires are connected i know for fact that its a firewire and not a usb. i know what they each look like. i bought the firewire cable and it was marked down cause it was an opened and used item. would it be possible that it could be deffected and if that is not the reason what other options do i have?

    I would say that odds are high that you have a bad cable. Maybe that is why they returned it.
    I would suggest trying a different firewire cable.
    You can find Firewire cables inexpensively at monoprice.com. You need a 4 pin to 9 pin firewire cable.
    Here is a link.
    http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10301
    Other things to check:
    Is your camera plugged in to wall power (not to batteries only). Must be hooked to an AC power source to import.

  • Hello everyone!  i have a new macbook pro and i want to download aperture.  my app store says it is already installed (on my old macbook pro).  how do i install aperture from the app store in this instance please?

    hello everyone!  i have a new macbook pro and i want to download aperture.  my app store says it is already installed (on my old macbook pro).  how do i install aperture from the app store in this instance please?

    Are yoy sure that Apeture is not in the Applications folder of the new system? If it is move it to the trash and the App Store will let you download Aperture from it.
    You will need to make sure you use the same Apple ID you used to purchase it in the past.
    regards

  • I have a new macbook pro and want to transfer my Mail autofill from my old mac. Never used Time Machine or Migration Assistant -- looks complicated. Any easy way to do this?

    I have a new macbook pro and want to transfer my Mail autofill from my old mac. Never used Time Machine or Migration Assistant -- looks complicated. Any easy way to do this?

    caitlinfromcambridge wrote:
    Thanks -- I would like to try this. I do not know how to reach hard drive from old mac to new. Can you help me with this?
    There are two ways - you can boot your old Mac in Target Mode (reboot your Mac, and as soon as you hear the startup chime hold down the T key on the keyboard until you see the yellow/orange Firewire logo on screen).  You can then use a FireWire cable to connect your new mac to your old one.  The old Mac hard drive will appear on your new Mac as if it is an external hard drive.
    Details on Target Disk Mode:  http://support.apple.com/kb/ht1661
    If you don't have a firewire cable but you do have a home network (i.e. both computers can access the Internet at the same time), you can share the hard drive on your old Mac and then connect to it on your new Mac.
    Good article on sharing your hard drive:  http://support.apple.com/kb/HT1549
    Finally, if the above doesn't thrill you, you can hook an external drive to your old Mac, copy the mail folder over to it, then connect the external drive to your new Mac and copy it over.  It's two steps, but if you don't have a firewire cable and aren't comfortable with sharing over a network it will work just as well - you just have to wait for the mail folder to copy twice instead of once.
    If you get stuck post back!

Maybe you are looking for