I have a nidaq32.dll not found error. If i have already tried replacing the visa32.dll what else can i try?

I am working with VB6 on an application involving a PCI-6711 Analog output card. I now am in the phase of working on the install file. I have developed this application on an XP machine, and i am trying to install it on a Windows 2000 machine, but i get a "nidaq32.dll file not found" error when i try to run my program on the 2000 machine. I have looked in the System32 folder and nidaq32.dll is in fact in the folder. I am wondering if my install file (created using INNO installer) didn't register the file correctly, of if it has to do with the driver i am using on the PC. I have NIDAQ 6.9.3 installed on the 2000 machine and NIDAQ 7.2 installed on my XP machine.
Any help would be appreciated.
Thanks,
Gerry

Hello GVanhorn,
The problem seems to be that you have different drivers in the systems. You might want to use the same version of the driver in both machine since that will install the same version of the nidaq32.dll.

Similar Messages

My MacBook2,1 10.6.8 has been running very slow and I have tried all the basics but what else can I try to help speed it up?

My Macbook is running so slow like it drives me crazy, it freezes up a lot either on the internet or offline as well. I Have a MacBook2,1 Intel Core 2 Duo processor speed 2.16 GHz. The hard drive has 160.04GB with 16.34GB available and the RAM is1GB DDR2 SDRAM 667MHr. I have tried using Disk Utility to repair permissions, I deleted a bunch of apps, I've done other maintenance and I don't know what else to do. I would really appreciate anyone that could help me figure what to do or show me where to go to fi d out what to do.

You might consider upgrading the RAM. 1GB is the bare minimum to run Mac OS X 10.6.8. See this page for RAM information for your Mac: http://www.everymac.com/systems/apple/macbook/specs/macbook-core-2-duo-2.16-whit e-13-mid-2007-specs.html.
You are also running low on free disk space, so consider moving files over to an external drive or delete files you no longer need.
Also, please explain what "done other maintenance" involves.

I have lost my iPhone. Do I need to report here to Apple? I have got all the IMEI no. and serial no., and also I have already reported to the police. What else can I do to protect my privacy inside my phone?

I have lost my iPhone.
Do I need to report here to Apple? I have got all the IMEI no. and serial no., and also I have already reported to the police. What else can I do to protect my privacy inside my phone? Or is there any way to locate my phone through those numbers? (I do not have the FindMyPhone apps)

If you had a pin code lock on the phone then your information is safe. If not then nothing in it is safe and I would suggest changing passwords to all accounts you had on the iphone ASAP. Also if you had find my iphone activated on the phone then you could go to icloud and wipe the phone remotely. If you didn't then there is nothing you can do about it.

My outgoing mail server smtp remains offline. I have tried using different port but did not work. What else can I try?

My outgoing mail server smtp remains offline. I have tried using different port but did not work. What else can I try?

OS X Mail: Troubleshooting sending and receiving email messages

HT201263 My ipod Touch does not want to turn on. I've tried all the different methods and I'm stuck and dont know what to do now. What else can I try?

My ipod Touch does not want to turn on. I've tried all the different methods and I'm stuck and dont know what to do now. What else can I try?

JesusDGZ wrote:
My ipod Touch does not want to turn on. I've tried all the different methods and I'm stuck and dont know what to do now. What else can I try?
I have no clue what you mean by "all the different methods." Here are my suggestions.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

IPad won't send emails but iPhone does. iPad message says server does not recognise email address resetting account makes no difference what else can I try?,

My iPad won't send emails despite identical settings with iPhone which does work. " server does not recognise email address" resetting account fails to solve issue. What else can I try?

Have you checked ALL the settings including the port assignments? Easiest way to get those back to is to delete the email account from the iPad then redo the email account. Usually the ISP providing the email account will have instructions on their web site.

I cannot turn off the system update notification for my G2? I have already tried turning it off in Settings (under Applications Manager). What else can I try? Thanks

Dear All,
I have tried turning off the system update notifications for my G2 and have not been successful so far. I have already tried turning it off via Settings/Application Manager/All. What else can I try here? Thanks.
Regards,
Jeffrey Wong

Unfortunately that is not possible any longer. My advice is to take the update. You'll have to at some point or either you'll accidentally accept it. The HD voice and video works well between compatible phones. And, if you run into a problem, better now than later.

After a one week logout and shutdown my macpro 1,1 laptop shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager and zapping the PRAM have failed to permit startup. What else can I try?

After a one week logout and shutdown my macpro 1,1 laptop running OSx 10.6.8 shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager and zapping the PRAM have failed to permit startup. What else can I try?

Startup – Black screen with cursor
Startup Issues - Resolve
Startup Issues - Resolve (2)

HT1212 Tried to follow instructions on how to reset the IPAD passcode. Did not work. What else can I try?

Followed instructions on how to reset iPAD passcode. Did not work. What else can I try?

Hi, Nancy, and welcome to Apple Discussions. You've posted your question about using an iPod in a forum devoted to iPhoto, an application that has nothing to do with iPods. You would probably find a better-informed audience over in the iPod discussion area, under the particular Pod model that you own. Good luck!

My Droid 2 has been malfunctioning lately making the phone completely uncontrollable. I have done a hard factory reset and the problem still persists. What else can i try?

My Droid 2 has been malfunctioning lately making the phone completely uncontrollable. I have done a hard factory reset and the problem still persists. What else can i try?

We want you to enjoy the best reliability with your Droid 2 Jaxie! What specific problems are you having with the device? Is your software up to date? The latest version available is: 4.5.621.A955.Verizon.en.US. If the software is up to date, we recommend running the device in safe mode to determine if third party apps may be causing the issues. I hope this information is helpful.
http://bit.ly/IPw5jE
http://bit.ly/o5McAQ
Sincerely,
JonathanK_VZW
VZW Support
Follow Us on Twitter@VZWSupport

Just got iphone 4 yesterday. I can text to iphone users but not to non-apple users. I am connected to wifi and the imessage is on. What else can I try?

Just got iphone 4 yesterday. I can text to iphone users but not to non-apple users. I am connected to wifi and the imessage is on. What else can I try?

o2_Team wrote:
Settings - Messages - Send As SMS is on?
That setting is only related to iMessage. It causes iMessages to be resent as SMS if iMessage fails.

I have a new iPad mini but can not activate it. I have tried restarting the iPad with no luck. What else can I try?

I have a new iPad mini but can not activate it. I have tried restarting the iPad with no luck. What else can I do?

My Mac Hardware Overview:
Model Name:          iMac
Model Identifier:          iMac4,1
Processor Name:          Intel Core Duo
Processor Speed:          2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          2 MB
Memory:          1.5 GB
Bus Speed:          667 MHz
Boot ROM Version:          IM41.0055.B08
SMC Version (system):          1.1f5
Serial Number (system):          W8******U2P
Hardware UUID:          ****
<Edited By Host>

After updating my Iphone 5 to IOS 7 my imessage says "waiting to activate", I have reset the network settings what else can I do to fix this problem?

After sucessfully installing the new IOS 7 software on my Iphone 5, my imessage will not work. It has the message "waiting to activate". I have reset my network settings several time and turn my phone off and back on. What else can I do to get the imessage back up and running?

To sync an iOS 7 device you need to be running iTunes 11.1.1; iTunes 10.6 is way too old and won't work. You need to install iTunes 11.1.1, but to do that you need to be running at least Mac OS X 10.6.8.
So you need to do the following:
1. Upgrade your Mac to at least OS X 10.6.8 (later preferably, but 10.6.8 at the miniumum).
a. Check first to see if your model Mac can be upgraded, check that it has enough RAM and so forth (2GB at the least, more if possible).
b. If you can't upgrade your Mac, or don't want to, then you will have to buy a new Mac with the latest version of OS X (currently 10.8.5, soon to become 10.9) and iTunes 11.1.1
2. Install iTunes 11.1.1 on your newly upgraded Mac.
3. Sync your iOS 7 iPhone with iTunes.

TS2771 i am trying to fix my ipod touch tryed password to many times the problem is my usb port on my computer does not work what else can i try?

my sons ipod is disabled from trying password to many times my usb port on my computer does not work. what else can i do to get this disabled off my sons ipod please help!!!

The only thing you can do is place the iPod in Recovery mode and restore via iTunes on a computer. It is a good security feature.

"Server not found" error on every site after some use, the pages work fine in other browsers

I'm getting the "Server not found - Firefox can't find the server at blablabla.com" error after using Firefox for a while, sometimes 30 minutes, sometimes 2 hours. This error appears on every single page, and does not go away until I restart Firefox. Google Chrome can load these pages with no problem, so it's not a problem with my internet connection. I've already done everything on this page:
http://support.mozilla.com/en-US/kb/Server%20not%20found
And it did not help at all.
I have not installed any new extensions, plugins, userscripts or anything like this, and everything was working perfectly fine until a week ago.

I've encountered 404 errors and xmarks keeps popping up when I try to open igoogle.
All of the is in Firefox4.0 Beta 8.
I don't have any problem in Chrome, no 404 errors, no xmarks showing up when it should be the igoggle search page.
Most disconcerting.

I have a nidaq32.dl​l not found error. If i have already tried replacing the visa32.dll what else can i try?

Similar Messages

Maybe you are looking for

I have a nidaq32.dll not found error. If i have already tried replacing the visa32.dll what else can i try?