I have a PC and a need help to configure my external hard disk on my network. Thanks

If you mean you wish to plug a USB drive into the Airport Extreme router (or TC not express) that is easy..
The disk must be formatted FAT32.. as if.. stay away from FAT .. or HFS+ ie Mac OS extended Journaled.
Format the disk on a Mac is best.. and even use GUID partition scheme not MBR.
The PC has no issue writing and reading files because this is a network drive.. The PC does not write to the drive.. it writes files to the Airport OS which writes and reads the disk and passes the info using standard windows SMB.. To the windows computer it will be a Windows NT server.. FAT32 setup.
If your setup is different.. to my hugely guessed assumptions.. give details.. always helps to have.. make and model.
Make and model of disk.. make and model of router.. how the setup will be done.. what windows OS you run.. etc etc.
As it stands your question could have nothing to do with apple at all.. other than you posted in a forum so I guess there is something apple in there somewhere.

Similar Messages

When I try to install iTunes 10.5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.

5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.

After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much!

Needs help setting up an External hard-drive.

I received this external hard-drive and I need help with steps to be able store files on it, unfortunately it's not plug and play.
Stats and Errors I received:
http://i103.photobucket.com/albums/m153/LordKirkenMorder/Snapshot2009-11-1202-04-32.jpg

BDAqua wrote:
If you have the SW copied off it...
In Disk Utility
3. Click the Erase tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your external volume.
6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase... after completion hopefully it'll partition.
Since thats shot was taken a Partiton was made which im not sure if it was fully made called Untitled 1, it wont mount and I'm in hour 4 of it verifying and repairing. how long should Checking HFS Plus volume take?

I need help to repair my external hard drive

(1) My External Hard Drive finally stopped working. Whenever I tried to use it, I would only get variants of, "Time Machine couldn't complete the Backup to "My Passport for Mac", or "The backup disc is not available".
(2) "No problem," I thought. "There is no problem with my computer, so I'll just buy another external hard drive," and I did.
(3) About this time, I partitioned my computer hard drive to enable me to run both Snow Leopard and Mountain Lion. I did this with step-by-step instructions by Apple technicians.
(4) I now find that I have lost a considerable number of files, including those that I value most highly.
(5) I now find that I need the files in my old, abandoned external hard drive, and it seems to me that the easiest way to access those files is simply to repair it.
(Here's what I've tried so far: (1) Disc Utility Repair. Didn't help. (2) COMMAND-R start. This produced a window with the following entries: Restore from Time Machine Backup, Reinstall OSX, Get Help online, Disk Utility. It seemed to offer hope, but I couldn't highlight any of them, and the "continue" command was dimned out. Where do I go from here? Data recovery is the solution usually offered, and I've alwys wondered why. It seems to me that fixing the external hard drive should always be the first thing to be considered. Data recovery is expensive, and fixing the external hard drive might be cheap.

baltwo wrote:
I don't think the HD's broken. More likely, since you used it for TM, that's what causing your issues. However, since I don't use TM or ever use WD's crappy HDs, all I can suggest is to peruse Pondini's TM FAQs for starters. Then, check out his troubleshooting steps.
What is "WD"?

Dad needs help with laptop out of hard disk space

You Ipod users willh have to excuse me but I need some help. Bought my daughter an 30gb for xmas and one by one we are getting thru the problems. She nows has 1100 songs on it but I had to send her my laptop as it would not talk to her p3. Anyway her hard disk is now full on the laptop. Question is do you have to keep all in library to keep it on the ipod cos she cant get more song on? Can she delete anything from the laptop as I think she is going for the full 7,500 songs on her IPOD Thanks people

Use the instructions in this article to set the iPod to sync manually, and then delete the songs from the iTunes library; they will not automatically be deleted from the iPod.
(10519)

Please help! My LG external hard disk is not showing in finder and trouble using disk utility

I used my LG external HDD disk drive on my mac a couple of times but now it's not being recognised by my mac anymore and doesn't show up on finder.
I found the disk in disk utility and when i verified it, it said:
Unable to bootstrap transaction group 3164: incorrect block type
Unable to bootstrap transaction group 3163: incorrect block type
Unable to bootstrap transaction group 3162: incorrect block type
Unable to bootstrap transaction group 3161: incorrect block type
No valid commit checkpoint found
The volume AE055338-D940-488B-A5E9-0A6F4701832A was found corrupt and needs to be repaired
Error: This disk needs to be repaired. Click repair disk
I clicked repair disk and it said:
Unable to bootstrap transaction group 3164: incorrect block type
Unable to bootstrap transaction group 3163: incorrect block type
Unable to bootstrap transaction group 3162: incorrect block type
Unable to bootstrap transaction group 3161: incorrect block type
No valid commit checkpoint found
The volume AE055338-D940-488B-A5E9-0A6F4701832A was found corrupt and cannot be repaired
Error: This disk needs to be repaired. Click repair disk
I tried several other times to repair it by clicking repair but the same information kept popping up.
I'm also unable to erase or partition the disk. I have no important files on it so I don't mind deleting them all but i'm unable to do so using disk utility. Please advice on what to do or the steps to take from here. Thanks

http://

New mac user, need help transferring music from external hard drive

I am new to using a mac. I have had an iphone for almost a year so I am catching on quickly to my macbook but this problem has stumped me and all my mac using friends.
I have a 500gb seagate external hard drive aswell as a new 500gb seagate internal.
I transferred all my music from an old ipod onto the external hard drive. There is about 50gb of music.
When I plug my external into my pc desktop I can see the music folder organized into subfolders with files inside that are encoded unless they are opened in itunes. My pc doesn't have enough internal memory to open and store my music library so I have just left it on the hard drive. When I plug the hard drive into my macbook it will show the music folder as having 50gb but when the folder is opened, none of the subfolders or files are visable.
I went ahead and dragged the folder from my harddrive onto my desktop. It took about an hour to transfer all the files but now the folder is sitting on my desktop and when I open it, it is empty. If i look in the folders info, it says it has the 50gb. If i try to drag and drop it into itunes nothing happens. If I drag and drop it into the itunes music folder, it will go there but will not show up on itunes.
I'm stumped and no longer eligable for apples telephone support as I bought this macbook from a friend. Any help would be greatly appreciated

I have a couple of theories, but I'm not an iTunes expert. These people are, though:
http://discussions.apple.com/forum.jspa?forumID=782
Try posting your question there. Good luck!

Need help using iPod as external hard drive

Hi. Will soon be receiving a new iMac to replace my old Dell PC and had a question about how to get all of the contents of the Dell hard drive onto my new iMac using my 60GB iPod. I am a complete computer novice.
1. How do I do it?
2. The iPod is currently formatted for my Dell PC. Once I have transferred all of my files (including music) over to the iMac, do I need to reformat the iPod? How do I do this?
3. Will all my playlists in iTunes be saved when I do the transfer?
Any advice or direction to links would be greatly appreciated.
Thanks.
iMac G5

"how to get all of the contents of the Dell hard drive onto my new iMac using my 60GB iPod"
If everything you've got will fit then enable your iPod for disk use and drag what you want onto it, or do it a bit at a time: Using your iPod as a hard disk
There is a good general guide to switching from Windows to Mac at the following link that touches on moving music as well How to Move to a Mac - Get your stuff from your PC to your new Mac
"1. How do I do it?"
Have a look at this guide specifically on moving iTunes: How to use your iPod to move your music to a new computer
"2. The iPod is currently formatted for my Dell PC. Once I have transferred all of my files (including music) over to the iMac, do I need to reformat the iPod? How do I do this?"
If you don't intend using your iPod on Windows again the you can reformat it by restoring it on the Mac: Restoring iPod to Factory Settings
"3. Will all my playlists in iTunes be saved when I do the transfer?"
If you follow the instructions in the guide you should have your whole library just as it was.

Need help with homemade usb external hard drive

I got a usb external hard drive kit that you can put any hard drive into, and I have a 20gig western digital disk. I cant seem to get it to work on my gateway(333 mhz celeron) with windows 2000, but I am going to order a imac in 6 days. Do you think that the external hard drive would work on a newer computer like an imac? Also What jumper settings would I have to put it on? The current choices are "slave", "single or master", and "master with slave present". There are also 3 jumper settings that could be possible, but it is not labeled on the hard drive.
thanks!

Rob, check the instructions that should have come with your drive kit, or check the manufacturer's website. Normally an IDE drive would be jumpered as 'master' or 'cable select' if it's used in a drive kit. BTW, that setting remains totally inside the drive housing, it is not visible or meaningful to the computer via the USB connection.
Whether or not your kit will work with a new iMac is hard to tell, esp. since you haven't been able to get it working so far. Have you checked to make sure whether or not you need to install a USB driver for your drive kit on your Gateway machine? (Win98 always requires USB drivers, WinXP rarely does, and I'm not sure about Win2K). For what it's worth, MACs rarely require special USB drivers.

Help, need help booting XP from external hard drive

Hi all, i can't seem to get XP to boot from my external hard drive.
OK, heres the story. i have an imac. i use bootcamp to run OSX and XP. things are good. but i run out of space, so i buy myself a 2tb bare drive and swap it out. so i put the original internal with OSX and XP into an external firewire/usb enclosure. I install refit. I hold option on startup and it shows that i have a windows and a mac OS i can boot from the External firewire disk. looks great, but when i choose the windows from the Ext disk, it doesn't boot, instead it loads windows7 on my new 2tb internal disk.
i hear its hard to boot windows XP from an external disk. my professor told me it has something to do with the boot.ini file on the XP disk... something about changing the value of the "rdisk" to 1, which i have done.
i am not trying to reinstall xp, rather just boot from it because i have so many applications/plugins that i do not wish to reinstall.
Does anyone know if this is possible?>> Logon to windows7, and create a system image/backup of the system FROM the XP external disk? and then reinstall XP on that disk, then restore back onto itself? that way i won't have to reinstall.
anyone have any ideas?

Hi boi,
you can't start ANY windows OS from external HD...

Need help finding a bootable external hard drive for a G4 Mini

Without going into details of a 3 month and counting 'nightmare' (several well-known vendors), I still can not find a hard disk drive that will still boot a PPC G4 Mini over Firewire 400. As I understand it, the Oxford (now J-Micron) 940-series chip-sets are not compatible with pre-2009 Macs. Can anyone provide clarity as to the precise requirements in this application and/or suggest a 1 to 2 TB drive that will still boot a PPC over Firewire? [And before anyone is stimulated to be 'cute' (snide), No, the G4(s) is not my only current Macs but I do have significant (valid to me) reasons to keep one working.]

Okay, I just looked at that OWC Elite Pro (not that it was unknown to me previously) - and they're still claiming that it has the Oxford 934 chip set. (so far so good). OTOH, I've been in daily contact with OWC techs and senior mgmt for several months now and no one there has ever suggested this as a potential alternative. I've been a loyal OWC customer since 1988 and had always highly--recommended them to friends (PREVIOUSLY). At the same time, on their so-called MiniStack "Classic" (NOT) model/page, they list the newer Oxford 943 chip set (which they've know for almost at least 3 months now (and have admitted in writing to me) will NOT ever boot a pre-2009 Mac (PPC or Intel) until/unless they come up with compatible firmware. Meanwhile (and to date), that same web page states " It can act as a boot drive as well." Which is a known, proven and admitted lie - which I've reminded them of at every possible occassion since October (and still they persist) . But, they'll be glad to take your money - they took mine after I had explicitly asked before purchasing 2 of these units if it would boot the G4 - and was told yes, but they knew/know it won't (go figure). Furthermore, be forewarned that their Guardian MAXimus is by far the worst POS I've ever seen in 30-years as a Mac addict. There' SO much wrong with it/these, it'd take me a few days to write it all out - as if I would want to ever revisit that sub-aspect of this continuing 'nightmare'

Have new domain and host need help publishing!

It has been a while since I last used iWeb. I have bought a new domain name to replace the old one and I have bought a host. I think I have it all typed in correctly and I hit test connection and it says it couldn't connect try again later. What am I missing? Any help would be so awesome!

ok i will type word for word what i have in my iWeb site publishing settings....
publish to: FTP Server
sitename: www.coolecreations.com
email: my e-mail
FTP SETTINGS:
Server address: coolecreations.com
username: my username
password: my password
directory/path: blank
protocol:FTP Port:21
Website URL:
http://www.coolecreations.com
when i hit publish i get this message:
A connection to coolecreations.com couldn't be established. Verify your settings and try again.

Help reg what formats to be used for my new 4tb mini stack to back up my macbook and 2 external hard disks

Hey Guys,
I need an advice from you experts regarding the different formats to be used to format my New 4 Tb ministack from OWC. I have a Mid 2010 Intel macbook pro with 500gb hard disk using Mountain lion and two external hard disk from Samsung and Iomega 1Tb each. I want to format this ministack into 4 partitions each of 1Tb each.
1) 1 Tb for time machine to back up my macbook pro.
2) 1 Tb of Free space to be used to store extra data using both windows and mac os.
3) 1 Tb for Samsung back up
4) 1 Tb for my Iomega back up
I know that for 1st option i need to format the partition (volume) to Mac os extended (journalled). I need help for others.For the 1 Tb free space, can i use NTFS so that i can use it on my wifes windows laptop and use a third a party application like tuxera NTFS for use on my macbook which i am already using to use my samsung and Iomega Ext HDD.
Also What format is required for these two 1 Tb volumes dedicated for external hard disk backups and how can i back up my external hard disks to these formatted volumes. Do i need to format them to Mac os extended (journalled) as well as i shall be using macbook pro to back up these hard disks.
Which would be the best software to back up these Ext hdd,can i use time machine? or CCC ?
Your help help shall be gretaly appreciated.
Thanks in advance.

Get Disk Warrior that will repair the problems without requiring that you reformat the drive - $99.00 on a bootable CD. Will not work on a FAT formatted drive.
You will need to use Drag and Drop to save your files by copying them from the bad drive to a good one.
To reprep the drive:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Hi, i'm new in my macbook air! i miss deleted my external hard disk few day ago and i had spend 45GBP to recovery the data! but the problem now is the text document is locked i not even can read and open the document! any solution??? urgent

hi, i'm new in macbook air, i was miss formatted and delete all my data on my external hard disk (pic, microsoft office document and etc). i spend 45gbp to install the software fianlly recovery all the data! but why my text document can't open and read?? what's is the problem?? because i'm still a student i hv alot of assignment file cant be read and open but nect week is the deadline of submission and i have no back up of all document. So any useful suggetion solution?? i've try the way alt+command+i to unlock but it doesn't work!! help! URGENT

when i open the file it appear some digits and word tat i couldn't understand. and the tool bar stated "Locked"
example: 422583321135679999=@ABBCCEEFGHIKJHMIFFFHFHDCEGFFBI\cb[C?@<=>=;;;<;>>>?<>B@>?==< =>?>@A?>?@<==<;:::899:89>:9;99;9:;<;66988;359<==9987789:8::9;>>=799<>:88856::;<: 99====<::98988;;96677998887866:89::;99647878665797698899;8466646763/121120+031/1 2/.1.,.0//.+/,+.0220/0.-/21-++--1---+-.+-.--/=Pdoxx
the digits and words tat appear on my document!
i used MiniTool Mac data to recovery! actually b4 tat i'm using hp computer and i saved all my files in my external hard disk. When i using mac i installed the NTFS-3G but it still cant read my external hard disk and i miss deleted and formatted all the data in my external hard disk. after tat my friends suggest me to purchased the software to recover all the data,finally i got all my photo back except my microsoft office files.
i purchased miscrosoft office software for my mac yesterday but the files still cant be read and couldnt recover back the document tat i saved! i was upset to spent alot of money but still cant get my document back!!

Hi everybody.. i have a problem nad i need help a.s.a.p ... i forgut my ipad passcode and tryed to remember it tell it locked and i cant get open .. it says connect to itunes .. i did that and its still not opening? what can i do? thanks

hi everybody.. i have a problem nad i need help a.s.a.p ... i forgut my ipad passcode and tryed to remember it tell it locked and i cant get open .. it says connect to itunes .. i did that and its still not opening? what can i do? thanks

http://support.apple.com/kb/HT1808
Regards.

I have a PC and a need help to configure my external hard disk on my network. Thanks

Similar Messages

Maybe you are looking for