I have a Photosmart 6510e that will only print after I shut printer off and then restart..

After setting up my 6510e photosmart all computers are able to print ---laptop, netbook and my iPhone can eprint. However, my desktop PC will only print once the printer sleeps (white light is dim) after I completely shut off the printer and then restart it. I have updated drivers and software. The message comes up "Unable to Communicate with Printer."

I have the same problem - I bought the 6510 printer yesterday and it seemed to connect wirelessly to my PC and shows as the default printer ok but when I try to print I get the message 'unable to communicate wirh printer'. I troubleshoot and am advised to switch on printer (it is already on) but when I switch it off and then on again the printing starts Ok. Very annoying and not what I had hoped for.....

Similar Messages

HT1725 I have a few songs that will only play for about a min the it will stop playing how can i get the songs back to a full song

I have a few songs that will only play for about a min the it will stop playing how can i get the songs back to a full song

Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the incomplete tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link.

My iPhone 5 will not turn on. And when it does, it will only stay on for a short while and then it dies again.

My iPhone 5 will not turn on. And when it does, it will only stay on for a short while and then it dies again.

Hi lammyrock,
I want to let you know to be patient as this troubleshooting can take some time depending on many different. First try putting your iPhone into recovery mode and then use iTunes to restore it. To do that, you can that by making sure that your iPhone is turned off, hold the Home button down while it is plugged into iTunes. You should get the graphic on your iPhone to plug it into iTunes and iTunes should prompt you to restore it. Once that is done and if you have a back up in iTunes or in iCloud, then you can put that back on after the restore is complete. Take a look at the article below for more information to help you.
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT201263
Hope this helps,
-Norm G.

It will sometimes work, and then after I shut it down, and then it does not work again. It says it is the proxy server.

The proxy server is refusing connections
Firefox is configured to use a proxy server that is refusing connections.
It worked this morning, and now it is not working. It keeps doing this me. It will work, and then when I go to get on it again, it no longer works.
* Check the proxy settings to make sure that they are correct.
* Contact your network administrator to make sure the proxy server is
working.

Thank you, so much! That worked!!! I appreciate your help.

MacPro1.1 with 3 internal hard drives, 2 with snow leopard OS & 1 with Lion OS, I have some software that will only run on OS 10.4.11, and I would like to add a 4th drive and format it to 10.4.11, can this be done aon this platform?

Hello,
I would like to load the 4th bay in my mac with a 2TB HDD and format it with the old system 4.11 will I have any problems?

Since it's a MacPro1,1, it originally shipped with Mac OS X 10.4.7 and will run Mac OS X 10.4.11 when installed from its original disks(or the Mac OS X Server 10.4 Universal Binary) and updated.
(62476)

I have Apple O/S 10.6.7 and Firefox 4 and when I play a homemade slideshow/movie from my webgallery it plays correctly the first time, and then play upside down after that, unless I shut down Firefox and then restart it...why?

I discovered this incompatibility (?) with the help of a Sr. Advisor from Apple. I have uninstalled Firefox and the plist and reinstalled it and the same thing happened. Is there something that I can to do circumvent this problem?

I discovered this incompatibility (?) with the help of a Sr. Advisor from Apple. I have uninstalled Firefox and the plist and reinstalled it and the same thing happened. Is there something that I can to do circumvent this problem?

I have a macbook pro 13" 2011, When my computer boots I get code on my boot up screen and then my computer shuts off and then restarts. Its an endless loop, as my computer tries to boot up.

I have a Macbook Pro 13", that was purchased in 2010-2011. So randomly yesterday, when I boot up my computer I got to the boot screen, then code popped up on my screen. ** I have attached an image of the code below.** But after the code pops up, my computer shuts down, and tries to boot up again. This is an endless loop and doesn't get passed the boot screen. The code shows up everytime.
I personally believe this might be a software issue and not a hardware. Please feel free to shoot out any ideas or a translation of what the code is referring to.
THINGS I HAVE ALREADY DONE:
- Reset the PRAM by holding CMD+Option+P+R
- Gone into Safemode and tired to verify the Harddrive.
- Please don't comment saying, "take out the battery." , "hold the power button for.." , None of that sh#* works.
Below is three different links for the same image. (just in case, **** breaks).
[IMG]http://i57.tinypic.com/2z82stl.jpg[/IMG]
<a href="http://tinypic.com?ref=2z82stl" target="_blank"><img src="http://i57.tinypic.com/2z82stl.jpg" border="0" alt="Image and video hosting by TinyPic"></a>
http://tinypic.com/view.php?pic=2z82stl&s=8#.U0LJidy4nFI

What happens if you boot holding the command S keys down?
If it stays running in single user mode
try the command
fsck -fy
You could try holding the option key on bootup, to see if presents you with a startup disk however
It looks as if you need to reistall the OS.

My iPod 5 has recently updated to iOS 7.0.3. I have noticed something where my internet willonly work for about 2-3 minutes and then stop working. It is not our internet, because all of our other appliances work completely fine. Any help?

My iPod 5 has recently updated to iOS 7.0.3. I have noticed something where my internet will only work for about 2-3 minutes and then stop working. It is not our internet, because all of our other appliances work completely fine. Any help?

I did not mean to click the "this solved my question button by the way.
I have tried most of this, except for a couople of things i currently cannot due. The apps that are acting up the most are YouTube an Vine. Facebook and Safari work fine.

I have an Iphone 4 and starting two days ago when using either pandora Itunes after two songs i no longer hear sound. This happens whether using the headphones or not. I have to completely turn app off and then back on to get another two songs.

I am not sure why or what happened but for the last two days every time I attempt to listen to any music I am limited to only two songs. I have tried multiple things but nothing is working. The only way for me to get more songs to play is to completely turn the application off and then restart it again. I have to do this repeatedly after only two songs. You can see that the music is still playing but I am getting no sound. Can anyone help with this? Has anyone ever experienced this?

if your minimum term contract has expired then the hub is yours and any warranty has expired. your monthly payments then revert back to standard terms and any discount you had at outset has ceased. you then go on a rolling monthly contract and the benefit of keeping that is you can move to another ISP with 30 days notice or 14 days if using a MAC code with no cancellation penalty
in the vast majority of cases if you renogotiate a new contract you can get a better cheaper deal that you are currently paying but you then lose the ability to move at short notice without penalty
you can always phone the options team who are uk based and see what is on offer, including negotiating a new hub, and if you don't like the offer then don't accept 0800800030
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

HT1688 My Iphone 4 randomly shuts itself off and will not turn back on unless I preform a hard reset.

I have an Iphone 4 that will randomly shut itself off and then not come back on unless I preform a hard reset. Also, it sometimes freezes up and needs to be reset in order for the device to begin working properly. I have tried to back up and restore using itunes on my computer but I still have the issue. Can someone shed some light on this issue for me and let me know how to correct it? Thank you. Randy.

Try to set it up as new device, this time without using the latest backup. If this does not work, contact Apple to get it checked.
Apple - Support - Service Answer Center

On new MBP I keep getting message that I need to shut down and then restart

I just got a new 13" MBP. I took the old 500GB 7200 rpm HD (which was operating perfectly) out of my old 13" white MB and put it in the new MBP. Now at boot I get as far as a gray screen, then I get a black screen with text in several languages saying that I need to shut off and then restart the computer. I went through this drill 5 times with no indication that anything was improving. I am sure that the edge card connector is fully seated on the old HD. Any ideas as to what is happening here?

The Operating System for the old and new machine is different, you can't just swap drives like that, what you're getting is a Kernel Panic.
You need to install the OS from the install discs that came with the new machine onto that hard drive. Boot from your new install DVD (hold c at start) and do an Archive Install of the OS so it saves your user data.

I have a on line office manager that will only run with windows 7 or vista, how can I run it on my iMac?

I have an online office manager that will only run with windwos 7 or Vista, how can I run it on iMac?

If they don't have a Mac version and you must have it, you'll have to install Windows in Boot Camp or similar app.

I have some malware that will only let me open a safari window part way

I have some malwars that will only let me open a window in Safari part of the way. how can i fix this

Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found
http://support.apple.com/kb/TS3408

What is the best compressor setting to use ... when exporting a 720p timeline from FCP for a project that will only be played back in a standard def monitor?

What is the best compressor setting to use for DVD StudioPro ... when exporting a 720p 30 timeline from FCP for a project that will only be viewed in a standard def monitor?

Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
Is there an easier way?

I have a powerPC 8500 that will not boot up.

I have a powerPC 8500 that will not boot up. Lights come on, drives spins up and nothing. Any ideas? It has been sitting in storage for years. I would like to get some info off it.

If you wish to do further testing to insure it is the PRAM battery at fault before ripping into the computer, there are a couple of things that always worked for me if the battery was really the problem:
1) Zap the PRAM--cold boot and immediately press and hold these four keys simultaneously:
command
option
p
r
Keep holding until you here a total of three (3) startup chimes, then let go the keys. NOTE: In some Mac models, the second and third start-up chime tone during a PRAM zap can be rather quiet. Either crank up the volume, do the zap when the room is quiet, of use headphones to be sure you are hearing teh tones.
2) See if the computer will boot from a system disk by holding c during boot. The disk can be a full retail install disk, a system restore disk supplied with the computer, or a utility disk like DiskWarrior or TechTools that allows booting. If the computer boots and you get video, you can feel confident that the only thing needed is a PRAM battery. You can do a hot boot back to the hard drive and the computer should work as long as someone doesn't unplug it again.
However, if neither of these work, that can mean something more sinister than a PRAM battery has gone walkabout.

I have a Photosmart 6510e that will only print after I shut printer off and then restart..

Similar Messages

Maybe you are looking for