I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI  inputs in the back.

I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
The receiver has two HDMI  inputs in the back.  However they say they are not for PC's.  Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables.  I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV.  But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
My Email is [email protected] 
Do you have any suggestions
Thanks
Bob

I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
Bob

Similar Messages

  • HT1203 i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

    i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

    It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

  • I just bought the BDP-S1500 yesterday and can not get it to work via wireless

    I just bought the BDP-S1500 yesterday and can not get it to work via wireless????

    Hi BigDaddy317,
    Please the link below for further assistance in connecting your wireless device to the internet.
    https://us.en.kb.sony.com/app/answers/detail/a_id/33377/p/47329,47564,95482/c/65,66/kw/internet
    https://us.en.kb.sony.com/app/answers/detail/a_id/35983/p/47329%2C47564%2C95482/c/65%2C66/kw/internet
    Please let us know if you're getting the same result or the error messages that you see.
    Thanks,
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

  • The air port on my imac went off and i can not get it to work

    my air port on the imac weny off and i can not get it to work now

    Apple used to use airport name for everything.. is this the internal wireless card?? Or external airport router?
    If it is the internal wireless card, is it still listed in system profile.. and do a hardware test with your original CD.
    See http://support.apple.com/kb/ht1509
    The problems with Mavericks are very great.. if you upgrade installed anything can happen.. a common feature is the internal wireless card fails to work.
    Give details and we can figure it out.
    Here is discussion about the same thing as I think has happened to your imac in macbook.
    https://discussions.apple.com/thread/5219345?tstart=30

  • I have Nortons security suite under the old version the Idenity protection worked I kept all my passwords under this which used a master pasword I did not save passwords any were else and now can not get it to work supplying passwords for my l0gon site.

    I have Norton's security suite under the old version the Idenity protection worked. I kept all my passwords under this which used a master pasword I did not save my passwords any were else and now can not get it to work supplying passwords for my logon site.

    Symantec need to correct a mistake they made with their add-ons. They originally updated their add-ons after quite a delay to work with Firefox 4.0 as shown here - http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-4-compatibility-hotfix-is-now-available/td-p/428894
    They made an error with the update in only listing it as compatible with Firefox 4.0, so they will not install on Firefox 4.0.1 and subsequent Firefox security updates. Symantec have indicated they will be releasing an update to correct their error soon, for details see http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788/page/12

  • HT4108 I have a hdmi connector and can not get a picture to come on my tv. Need help also bought the RCA cables and can not get it to work with my iPhone 4 g

    I have a hdmi dock connector and can not get  it to show on my tv. It's a iPhone 4g please help also have a RCA cable to and can not get it to work either

    With what apps?  Not all apps require video output.

  • I am trying to setup wireless using my old dome Airport ExtremeBase station. I had previously used it about 5 years ago when I had dial up but have now switche to DSL with Windstream. I can not get connecte as ABS keeps trying to dial up(the phone number)

    I am trying to setup wireless using my old dome Airport Extreme Base station. I had previously used it about 5 years ago when I had dial up but have now switched to DSL with Windstream. I can not get connected as the ABS keeps trying to dial up(the old phone number). When I tried to change my network settings an annoying popup window says "your network settings have been changed by another application'. I have no idea what the message is all about and when I close this window it immediately pops up again and prevents me -as far as I can tell -from changing my Airport settings?  I need advice on how to get this wireless setup done. Maybe a reset? or something else? I have the DSL phone line plugged into WIndsteam Seimens Speedstream 4200 modem and then the ethernet (yellow) wire from the WIndsteam Seimens Speedstream 4200 modem to the port on the dome that is a circle of dots.

    1)Can you explain how using the AEBS as a bridge will work with the Seimens Speedstream4200?
    As a bridge, the AEBS will basically become a wireless access point. This will allow the AEBS to provide a wireless network, but still allow the Speedstream to provide NAT & DHCP services for the wireless clients connected to the AEBS. If the AEBS was left as a router, you would have a double-NAT condition which isn't necessary bad in itself, but would create a second subnet. That would make it more difficult for clients connected to the AEBS to access clients connected to the Speedstream.
    2) Is there a link that will guide me through the steps to set the AEBS as a bridge?
    You can easily reconfigure the AEBS as a bridge using the AirPort Utility.
    ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode)
    3)Can I just connect the DSL phone line to the AEBS and eliminate the Speedstream4200?
    Unfortunately no. The AEBS does not have a built-in DSL modem. You will still need the Speedstream to provide this function.

  • I have a toshiba lap top computer with vista and I can not get my iphone to connect all the way .. it says "connected with limited activity"?

    I have a toshiba lap top computer with vista and I can not get my new iphone to connect all the way .... it says "connected with limited activity". which means I don't get on. Any help would be appreciated. Thanks.  

    Hi all,
    Guess I understand what is going on as I'm also experiencing the problem.
    Basically the issue is about the iPhone 4's personal hotspot.
    I'm trying to hook on personal hotspot to my toshiba laptop but it couldnt work as the connection is limited to local only without Internet access.
    The hotspot works well on other laptop and I-devices, but not my toshiba...
    Hope to get assistance here. Thanks

  • My apple Id has been disabled. I have relogged on changed password and still can not get it to work on my Iphone

    My apple Id has been disabled. I have relogged on changed password and still can not get it to work on my Iphone

    Contact itunes support.  Click Contact Us at the bottom of this page.

  • I can not get reader to work on xp.

    I have installed the 9 on  Reader and can not get it to work. I installed Fixit to see and it does not work either. Is there a place on XP that needs to be checked or opened. This started after the the computer was attacked by virus and they got into the registry. Had this repaired and this is what makes me think  something is  not opened for readers to work. Any ideas out there.

    chuck59c wrote:
    I have installed the 9 on  Reader and can not get it to work. I installed Fixit to see and it does not work either. Is there a place on XP that needs to be checked or opened. This started after the the computer was attacked by virus and they got into the registry. Had this repaired and this is what makes me think  something is  not opened for readers to work. Any ideas out there.
    Sounds like your sytem didn't get repaired. I would take it back to the tech that worked on it.
    In the meantime, you haven't mentioned what happens when you try and get it to work so we have no syptoms to go on to help you. Plus, what is fixit?
    There is no place on XP that you need to do anything special to get Reader to work so again, sounds like your system is still hosed.

  • HT4528 just bought a ringtone app but can not get it to work

    just bought a ringtone app but can not get it to work, I can get to putting on my desktop but after that it wont tranfer to my "tones"
    Angela

    Contact the app developer for support.

  • I can not get itunes to work on my Windows 7 32.

    Itunes was working fine until the update came into play for the 10.5 and I can not get itunes to work now. All I get is an error message saying it's not loaded correctly and error 7 and errror 5 =>> this is really getting hard to deal with cause I have deleted and added it back so many times I feel silly.. Please tell me someone out there can help me fix this problem...

    See the further information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links.
    tt2

  • Can not get message to work om iPad, Can not get message to work om iPad

    Can not get message to work on iPad

    Please be much more specific. What exactly happens when you try to send a message?

  • I can not get NETFLIX to work, does anyone have any suggestions.

    can not get NETFLIX to work, does anyone have any suggestions...
    I have downloaded and installed Silverlight..
    and uninstalled it and reinstalled it...
    I have called Microsoft and also called Netflix support..
    who advised me to call Microsoft.
    Microsoft advised to to call apple
    seriously?
    HELP!

    Have you tried a different web browser like Mozilla FireFox?
    Have you tried just restating your Mac?

  • I dont know if anyone can help me but l can not get itunes to work on my computer

    i have uninstalled itunes and installed it again but l still can not get it to work on my computer . Can anyone help ?

    i have uninstalled itunes and installed it again but l still can not get it to work on my computer . Can anyone help ?

Maybe you are looking for