I have a problem when I receive calls I can not hear well or when it cuts, like when I pass calls. I have to put the earphone. someone has the same problem?

I have a problem when I receive calls I can not hear well or when it cuts, like when I pass calls. I have to put the earphone. someone has the same problem?

I solved it myself, after the "note" which came back from FF/Mozilla just as I finished my message, commenting on what it was that my system had , I wnnt back to check my plug-ins etc. I downloaded the latest Java, BOTH 32bit AND 64 bit versions and latest Firefox.
Now all is working.
Thanks,
B.

Similar Messages

  • I have been told my macbook does not have enough gb for Lion. and that i can not keep my mobile me mail without lion. so does this mean I have to drop mobile me and get another email address?

    I have been told my macbook does not have enough gb for Lion. and that i can not keep my mobile me mail without lion. so does this mean I have to drop mobile me and get another email address?

    You probably know that mobilme goes away in June this year. There are two ways to access your mail account on iCloud, either through Lion or via the web. Web access won't get you to all the benefits of iCloud but will allow you to get to Mail, Contacts, Calendar, and Find My iPhone.  See this FAQ: http://www.apple.com/mobileme/transition.html
    If you decide to go with Lion, the maximum memory you can install is 4GB, however the system will only use 3GB, which is enough to run Lion. Lion requires 2GB, however, some have not been satisfied with it's performance in 2GB. One source for memory is OWC at http://eshop.macsales.com/shop/memory/MacBook/DDR2/

  • Whenever I call people over a voice call , they can't hear me speak .. but whenever I use facetime/facetime call they can hear me on speaker , hearphones

    whenever I call people over a voice call , they can't hear me speak , I can hear them speak though ! I've tried earphones and speakerphone .. but whenever I use facetime/facetime call they can hear me on speaker and hearphones

    Hello Liamd2465,
    Thanks for using Apple Support Communities.
    For troubleshooting this issue where your microphone appears to not be functioning correctly, please follow the steps in the article linked to below.
    If your voice is too faint or sounds unclear using iPhone, or iPod touch - Apple Support
    Take care,
    Alex H.

  • Why does my Iphone 5 ring when I get a call, but can not figure out why there is NO sound when I get a text?

    Why does my Iphone 5 ring when I get a call, but can't not figure out why it does not make a sound, when I receive a text or typing???

    Deborah,
    The solutions on here did not work for me.   I tried.....
    I have the same problem with a BRAND NEW iPhone 5c version 7.1- no sound when a text message arrives.
    (1) I have "do not disturb" scheduled correctly.   No partial moon on the main screen near the time and battery indicator.
    (2) I have the ringer icon correct with no slash.    Yes I turned the hardward mute switch to the UP position (ie the one above the + and - buttons on the left side.   I tried messaging with the bell as shown and bell with a slash and neither work.   The mute switch is not red (switch above the + volume hardware switch)     I enabled some assistant using the Settings menu.    And I press the dot (looks like a target symbol) and go to Devices and I can see what position the bell is in....either a bell with a slash or no slash.
    (3) Yes ringtones are configured for text and other. I can hear them when I am under settings > sounds.   But they do not link with the actual hardware.
    (4) I rebooted the iPhone 5c by using the button at top, slide the red bar, then pressed it again, apple came up for a minute and it seemed to be back up.
    (5) I upgraded the IPhone 5c from 7.0.4 to 7.1 using my pc and itunes.   And the upgrade was successful but did not fix the text issue.
    (6) I do not have it in airplane mode or silent mode.
    (7) I reset all settings using Setttings > General > reset > reset all settings .  this wipes settings but not data and media.
    This is really frustrating.

  • TS1702 I have 5 updates on my application icon but can not install them, whatsapp,g+ Facebook messenger, ubersocial. when tap update all it will not respond

    Can Install updates or my whatsapp and others

    You can’t open your current photo library using this version of iPhoto.
    That indicates that that is your library.  Put it in your Pictures folder if it already isn't there and make sure it's named "iPhoto Library".  It should look like this:
    Now launch iPhoto with the Option key held down and select that library to open.  If you get that same message close iPhoto and try the following;
    Apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

  • I am having a problem when I facetime and party can not hear me.

    Where is the microphone on the I pad 2?

    It is on the very top of the iPad. If you look on the left side, you'll see two holes, a large one and a smaller one. The smaller one is the microphone.
    I saw one post where a user said dust got in the mic hole. Usinjg a vacuum cleaner removed the dust and restored the audio.
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • Can not hear the voice of caller and caller can not listen me

    hi
    i got iphone 4 can not hear the voice of caller and caller can not hear me while head phone and i pod working perfectly.

    You may try using a different headphone to isolate the issue. And test your headphone as well with a different device like an iPod or other device, if it works then it's with the phone, that may needs service

  • Hi I have an iphone 5. When making and receiving calls I can't hear the other person. Has anyone else had this problem?

    Hi I have an iphone 5. When making or receiving calls I can't hear the other person? Anyone tell me what is going on?

    Try taking a look at this support document to see if the steps there help. If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support

  • Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

    Hello apple
    I have the problem with my iPhone and my friends have this problem too.
    My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
    Who have this problem??

    Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

  • Just recently, I have encountered a problem with my iPhone. When someone calls, I can clearly hear the caller, but the caler canno hear me speak. Sometimes the problem goe off and works properly, b most of the times, I am facing this problem.

    Just recently, I have encountered a problem with my iPhone. When someone calls, I can clearly hear the caller, but the caller cannot hear me speak. Sometimes the problem is nt there and works properly, but most of the times, I am facing this problem. I have tried plugging in the earphone and speak, but its the same.... can anyone advse what may be the problem?

    iphone 4g have this problem
    first solution :change the flex micro
    second solution : ic audio must reballed
    also watch video
    http://www.youtube.com/watch?v=C-n1LJEK3PM
    http://www.youtube.com/watch?v=prSZ9yJnofY
    http://www.youtube.com/watch?v=tkEiR6OPhhc

  • My microphone dosen't work when i call !! the caller can not hear me !! Any answer to this probleme ??

    my microphone dosen't work when i call !! the caller can not hear me !! Any answer to this probleme ??

    HI there,
    Please see the video link below to learn how to remove the pairing from your iPhone, powercycle the phone, reset the BlueAnt Q2 (please check which BlueAnt device you have and reset as approopriate) and then pair with iPhone again.
    http://www.myblueant.com/support/videos/Q2/iPhone/remove_and_reset/
    If this does not resolve your problem please contact our customer support team on +1 855 9 BLUEANT or +1 855 9 2583 268.
    Hope this helps
    Scott

  • My iphone 5 ATT, i can hear the recording, but can not hear anything from neither ear speaker or loud speaker when i call? what is the problem? what can i do, it is out of warranty.

    My iphone 5 ATT, i can hear the recording, but can not hear anything from neither ear speaker or loud speaker when i call? what is the problem? what can i do, it is out of warranty.

    1357b wrote:
    My iphone 5 ATT, i can hear the recording
    What recording?
    but can not hear anything from neither ear speaker or loud speaker when i call?
    You just wrote you could hear the recording...
    You can take it into an Apple store and have it checked out.

  • My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what c

    My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what can i do!???? Thanks a lot for help me!!!!

    I have a nearly identical problem with my Ipad 3. Mine is the left channel. I've yet to find help, but have found a number of other posts on this and other forums discussing the issue. People have tried restore, reset etc. Also, cleaning the ports with compressed air or cotton swabs. It appears to be a software issue, but no one is sure.
    Along with the original poster, I'd appreciate any help.
    As far as the 'level 6' poster, if you're going to be rude, please don't bother. Hope it was just a bad day.

  • Hi, i have problem when installing itune. it said:  Could not open key HKEY_LOCAL_MACHINE32\SOFTWARE|Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel. please help me!

    hi,
    i have problem when installing itune. it said: 
    Could not open key HKEY_LOCAL_MACHINE32\SOFTWARE|Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel.
    Please help me i can't do anything without itune

    For "Could not open key/write value" errors when reinstalling try b noir's user tip:
    "Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\
    [LongStringOfLettersAndNumbers]" error messages when installing iTunes for Windows.
    The technique can be applied to the branch of the registry mentioned in the error message.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • I am facing problem in using viber...can not receive  any call from Viber whn keypad is locked and whn i unlock phone thn on opening viber i can see the missed call notification... kindly guide me there is any setting so0 tht i can receive viber calls

    I am facing problem in using viber...can not receive  any call from Viber whn keypad is locked and whn i unlock phone thn on opening viber i can see the missed call notification... kindly guide me there is any setting so0 tht i can receive viber calls whn my phone is locked even as i can receive calls on HTC

    Hi,
    This is an official representative of Viber Media.
    Unfortunately we cannot change this feature due to Apple's restrictions. :/
    For more questions or technical support, please visit our official HelpDesk.
    Thanks,
    Viber

Maybe you are looking for

  • Kernel Panic in Mountain Lion OS X

    For the past 10days, my Macbook Pro (early 2011) has been experiencing seemingly random kernel panics.  Here are the most recent two.  I was hoping someone could help me figure out what is going on.  BTW, Apple HW Test passed fine.  Any help would be

  • Actionscript 3 / Firefox / Mouse release outside stage

    So I need to be able to detect when the user releases the mouse button outside the stage/movie bounds. I am using Actionscript 3 / Flash 9. Since onReleaseOutside was nixed, and setCapture is no longer there now that Flash 9 is final, I'm using an ev

  • Internal Pricing Error in VKM3

    When i am trying to release a Sales Order for Credit Block in VKM3, I am getting the Error " Internal Pricing Error" and the msg is The program link between tables KOMT1 and XKOMV using the XKOMV-IX_KOMT1 field no longer works in the pricing program

  • Simultaneo​us but Separate tasks in VI Logger

    Hello, We have two tools (A & B) that used to both send a signal to a PCI-6032E data acquisition board. The signal was being logged in VI Logger through a Traditional DAQmx task (we were using the version 1.1.1 of VI Logger). We had two separate VI L

  • HT4028 Aperture IPTC Core Subject Code Exports Incorrectly to PhotoMechanic

    Hello. When using IPTC core Subject Code in Aperture, what I type in exports incorrectly when read by PhotoMechanic Software.  It seems to default back to previous Subject Code entries that are invisible on my end using Aperture, and can't be "erased