I have a problem with my iphone 4s i have a new sim card from virgin but the problem is still happening it drops call and says that i am unavalable wont always send texts is there something wrong with my phone ?
i have a problem with dropping calls faild text and poeple cann`t ring say unavailble
what did your carrier say when you reported the issue to them?
Similar Messages
-
So I have to keep signing in on my iPhone and it says that I need to give my credit card information (again). Due to some error from previous purchase or something. But I've checked with my card and everything, and it just keeps me stuck on that page.
Please Help! Thanks.JerrBearBeware wrote:
So I have to keep signing in on my iPhone and it says that I need to give my credit card information (again). Due to some error from previous purchase or something.
How about giving us the exact wording of the message? -
when i'm not using it it turn off and won't turn on so i have to reset my ipod nano 4th gen just to turn it on. what will i do? is there something wrong with my ipod? is it ok to reset the ipod always?
when i'm not using it it turn off and won't turn on so i have to reset my ipod nano 4th gen just to turn it on. what will i do? is there something wrong with my ipod? is it ok to reset the ipod always?
-
There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?
Nah - that's just the normal boot process.
Clinton -
My itunes is not showing any of the podcasts I download past may 8th. Is there something wrong with my itunes?
Seconding this -- no podcasts have updated past May 8th. What is going on Apple?!?
-
i have problem with my iphone 4S when i put in it sim card from another country the iphone does not activate the serial No. DNTHNQZFDTD2 i bought my iphone from sweden , when i put in it iraqi sim card the iphone does not activate
What exactly happens?
Error message?
What does it say?
Please explain your issue. -
rMBP: Sometimes, after having been shut down, i have to press the power button several times before the machine starts up. It's 3 weeks old, and this has happened 2 times now. Is there something wrong with my rMBP?
Did you purchase the Mac new?
You have 14 calendar days from the time your items are delivered to initiate a return as noted here.
Even though you are past the 14 day limit, if it were me, I'd take the Mac back and explain what's going on. Your Mac should work out of the box.
message edited by: cs -
Is there something wrong with this table row definition?
I have am supporting a coldfusion app that manipulates several forms. One one particular page, there is a form that consists of several tables. The last 3 lines of the last table are
<tr>
<td height="35" align="right" valign="middle">Description:</td>
<td align="left" valign="middle"><input name="tmpPurpose" class="RptStd" size="70" maxlength="100" value="" onblur="document.ExpnDtl.Purpose.value = this.value;" onchange="ChkName(<cfoutput>#Session.CCWarn#</cfoutput>)" /><input type="hidden" name="Purpose" value="" />
<a href="#" id="aDesc" onclick="ShowHelp('9')" style="border:none; display:inline; padding: 0px 0px 0px 0px"><img src="/images/Help_Icon.gif" height="14" width="13" border="0" /></a>
</td>
</tr>
<cfif IsDefined("form.ExpnsCntrb")>
<tr id="CntrbErr">
<td colspan="2" class="Error"><cfoutput>#form.ExpnsCntrb#</cfoutput></td>
</tr>
</cfif>
<tr id="expnContrib">
<td align="left" valign="middle" height="35" class="RptStd" colspan="2">Is expenditure a contribution to a candidate, officeholder, or political committee? <input type="radio" name="rdoCntrb" value="Y" /> Yes <input type="radio" name="rdoCntrb" value="N" /> No</td>
</tr>
<tr id="COHInfo">
<td colspan="2" class="RptStd" align="left" valign="middle" height="35">
<input type="checkbox" name="chkCand" id="chkCand" value="X" onclick="if (this.checked) document.ExpnDtl.btnCOH.disabled = false; else document.ExpnDtl.btnCOH.disabled = true;" />Direct expenditure to benefit a candidate or officeholder
<input type="button" name="btnCOH" value=" Enter C/OH Information " class="RptBtn" onclick="window.open('/Testing/Test_COHBenefit.cfm?Parent=' + document.ExpnDtl.ItemID.value + '&Type=EXPN&Form=' + document.ExpnDtl.ExpnCode.value, 'CandidateInfo', 'width=730px,height=475px,scrollbars,resizable,location')" disabled /> <a href="#" id="aDirExpn" onclick="ShowHelp('11')" style="border:none; display:inline; padding: 0px 0px 0px 0px"><img src="/images/Help_Icon.gif" height="14" width="13" border="0" /></a>
</td>
</tr>
</table>
Now whne the form is displayed on my page, I always see the line of text Description and the line of text Direct expenditure to benefit a candidate or officholder (in bold above). But I never see the line of text Is expenditure a contribution to a candidate... (in italics above). It seems so simple but I can't figure out why that line does not display!! Is there something wrong with that tr/td definition?Have you tried removing the ID? Just to see if some CSS might be using that ID with a display:none or visibility:none statement?
-
Is there something wrong with a Oscar Gomez Fuentes 2Channel oscilloscope
Is there something wrong with a Oscar Gomez Fuentes 2Channel oscilloscope or are my devices configured wrong. I have DAQCard-6036E and SCC-2345 with SCC-Ft01 and SCC-A10 modules. The problem is that when I am measuring with A10 it effects to FT01's RMS and DC values. But when I am measuring with Ft01 everything is ok. So what's wrong?? I attached a picture of a front panel.
Attachments:
front_panel.JPG 132 KBNeuvos,
Do any of the signals you are measuring have high output impedances (> 1 kOhm)? If so, you may be seeing cross-talk (or ghosting). Below, I have included links to a number of documents that discuss this issue and methods for eliminating it:
Data Acquisition: Troubleshooting Unexpected Voltages or Cross-talk in Analog Input Channels
Using a Unity Gain Buffer (Voltage Follower) with a DAQ Device
Is Your Data Inaccurate Because of Instr
umentation Amplifier Settling Time?
Good luck with your application.
Spencer S. -
Merged clips - are they all bugs or is there something wrong with my system?
I have to use merged clips to sync video and audio because making every clip a sequence is too cumbersome and doesn't give me thumbnails to help choose my shots. Apparently, merged clips are very buggy. I can't use colored markers because they don't get saved on merged clips. I can't use match frame on merged clips because they don't find the correct frame. I can't set a poster frame on a merged clip except with the "in" marker. Are all those problems bugs, or is there something wrong with my specific system. I trashed preferences to fix another problem unrelated to merged clips, but that didn't solve any of the clip problems.
I don't believe there's anything wrong with your system.
-
Hi. Whenever I go through one of the menus in firefox, the links remain highlighted after my mouse passes over them. Is there a bug fix for this or is there something wrong with my computer? I am running windows 7 if that helps. This problem started ever since I upgraded to version 5.
I have downloaded and used the iPod Reset Utility, alot that did. My current state is iTunes on my XP Home with SP3 sees the iPod. When I drag a song to the iPod, the Sync message appears for about 5 minutes, then the Apple symbol appears. But no song has been transferred to the iPod.
I tried to tap into the XP iTunes database from my iBook, but although it acted like it would add the XP library to the iBook library, it did not. I've got 19 Gs of songs on the XP. If I have to load each song from its original CD to get it on my iBook I'm going to start looking for some other app or device so that I can listen to my music.
It is a shame, in the old days, Apple techs use to look at what was going on, now it appears they don't, so they never know they have problems until Apple's profits fall. -
My ipod is cracked and it chipped away a little more last night and that's when my wifi stopped working. My wifi works on every other device in my house except for my ipod. Is there something wrong with my ipod?
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Try right next to the router
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Could it be this?
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar -
Is there something wrong with Quicktime and TIFFs?
I've been trying to see with Firefox the TIFF images of patents at the USPTO site and I can't. The browser advises me to install the missing plug-in although Quicktime is already installed. I wonder if it's a Quicktime problem or a Firefox one. I have a reason to believe there's something wrong with Quicktime though. Read on to see why.
On my system the *TIFF Image Test* (from mozdev.org) fails although I have the latest Quicktime plug-in. This happens regardless of the browser I use, all latest editions: Firefox 3.6, Internet Explorer 8 (both 32-bit and 64-bit versions) and Chrome 4. All seem to fail to recognize the presence of the installed Quicktime although my Windows OS is set to open TIF/TIFF files with Quicktime/PictureViewer.
Running about:plugins on my Firefox does show the Quicktime plug-in for a variety of files but NOT for opening embedded TIF/TIFFs. Also, when I open *Tools -> Options -> Applications* I see there is no registered handler for TIF/TIFFs. They don't appear on the known Content Types.
Is there something wrong with the installation of Quicktime? I can see USPTO TIFF images only with Safari which appears to have an integrated TIFF viewer. I haven't tried to install alternatiff or any other alternative TIFF handler.DocBAZ,
I tried to visit the "test site" above. I'm not really sure it's an embedded image on a HTML page because I get a Firefox download window and a suggestion to open it with PictureViewer, which is the expected behavior for downloadable images. The mozdev.org test page on the other hand had an embedded image that needed the plugin, which is what is bugging me.
If you want a real complex test page with both an embedded TIFF and a downloadable one check AlternaTIFF here: http://www.alternatiff.com/testpage.html
Indeed the changes I made were in the QuickTime preferences, not PictureViewer which has no settings to change. And yes, Windows 7 has a unique place to deal with file types and MIME settings.
You will find some interesting suggestions over the problem at SuperUser.
http://superuser.com/questions/107142/uspto-site-asks-for-quicktime-plug-in-whic h-i-already-have-installed-why -
Is there something wrong with my ps4 or am i just being paranoid?
I noticed that when i try to play some games textures take a while to load. It's especially noticeable in Battlefield 4, when a map loads and i spawn i have to wait like 30 seconds or more for the textures to load. I wouldn't care too much about it but it always took way less time. I think i also noticed it in Witcher 3, some textures just take a really long time to load especially in Novigrad. In Batman Arkham Knight i can notice it too on some street signs and ground textures when i'm flying around. Is there something wrong with my ps4 or am i just being really paranoid?
tsiluk wrote:
... i am charging it but the battery indicator just shows 5% after about 4 hours of charging time. ...
Are you using the Supplied iPad Charger and Cable...
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
Try Each one in turn and if you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... -
Is there something wrong with my BT Vision.
Is there something wrong with my BT Vision.
It lists loads of programmes, but when I click them there are only a few episodes available.
For example, I search for "Regular Show" using the Blue button and since I've had BT Vision (for a couple of months), only the same two episodes have ever appeared.Hi McKenzieM,
Welcome to the forum.
I checked "Regular Show" and it looks like episodes 29 and 30 are currently available. I have sent this off to double-check this.
Can you give me examples of what other programs are showing a few episodes so I can look into it?
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
Maybe you are looking for
-
CATS ESS Applying check only for release Action....
Hi all , I have one requirement for applying some chceks at the time of releasing time sheet items . Currently I have applied the validation checks in a user exit ZXCATU03 . But here if am applying the check its working for all levels .... Like for
-
T030 - Planning Order - association to Cost element
Hi everybody I'd like to ask which association in T030 does the system when calculating Planned costs for production orders. I've 2 valorization classes for materials: 1 for stock materials and 1 for direct procurement on order. I would like to asso
-
I deleted a contact from my iphone4, but it re-appears in my text message contact list. How do I permanently delete this contact from my phone?
-
How many megabytes of a file can be downloaded in ...
i wanted to know the limit of downloading big zip files on my asha 501 in opera mini 8 browser...???
-
We are trying to create an external function that will be linked at run- time. How is such a function compiled? Does it need to be compiled into a Dynamic library? Or would the function be called? The operating system we are trying to do this is Sun