I have a problem with my macbook after i pressed the power button the screen turns blue and nothing is happening with it! What can I do? Pls helps and thx btw
I have a problem with my MacBook Pro, I pressed the power button and after that the apple noise came and the screen turned blue. What can I do and what happened? pls help & thx btw
You may find this helpful:
http://support.apple.com/kb/PH14061
Ciao.
Similar Messages
-
Thank you so much for any help you can give. I was informed the solution may have to do with "recovery mode" and "disk utility." If you need more information, please let me know. Thanks again for your help.
Hi there Colleen821,
I would recommend taking a look at the troubleshooting steps found in the article below.
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
-Griff W. -
My 2008 15" macbook pro would not start up. After pushing the power button, the startup tone sounded, but kept repeating as if something was jammed. Screen remained black with no logo nor messages. Pls help.
Now that you mentioned it, that might be the source of the problem. Something was definitely wrong with my graphics card before the incident happened. You mean that particular batch of graphics cards had some inherent issues, right? I went to the genius bar, and the 'genius' there, without trying to diagnose the problem properly, just adviced me to buy a new mbp! He said Apple will no longer try to fix or touch macs older than 5 yrs. Mine is 5.5 yrs old...
-
hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?
hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?
-
My phone has been asked to be plugged into itunes for the past hour or so, and it has been plugged in the whole time... i have tried holding in both buttons too turn it on and nothing is happening... whats wrong with it and how do i fix this :(?
Does iTunes see your phone?
Do you have a PC or a Mac?
~Lyssa -
My Ipod touch 8gb will not turn back on no matter what i do i have tried just the power button, the power button and home button, and connecting it to the computer and the battery wasn't close to being dead non of them work what do i do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I don't have a phone plan, so I cannot text without wifi. I have been using iMessage to text my friends, until it stopped working. I can text my sisters email, but not my boyfriends iPhone. The send button will not turn blue. Help? Please?
There is a problem with iMessage with what Apple says is a small number of iPhones and they are working on a fix. In the meantime try this:
1. Settings > Messages > iMessage = Off
2. Settings > FaceTime > FaceTime = Off
3. Settings > General > Reset > Reset Network Settings
4. Wait for the iPhone to Reboot
5. Settings > FaceTime > FaceTime = On
6. Settings > Messages > iMessage = On
You may have to repeat the steps a couple of times.
- with thanks to @deggie -
I am having trouble sending an i message after I type text in the field. The "send" button does not turn blue. Help!
Do you have something entered in the Subject field?
-
My IPhone 4 won't turn on , I have tried holding the power button , the home button for 20 secs and it won't work , tried putting it into DFU mode and nothings happened , last night I updated it to 6.0.1 since then it hasn' t turned on , what should I do?
I suggest charging it for several hours, then trying again.
-
i already charged it but nothing shows in the screen.. i did the long pressing both home button and sleep/wake button still no result.. please help me..
If it has a temperature warning, you may have over heated it. Keep it inside and at a cooler temperature exposure. Give it some time. Try holding down the home button and the power button at the same time until something happens.
-
The grayed out start screen that often occurs after the computer's battery has completely ran out occurs twice on my comp. This screen signifies that the computer is waking up from hibernation, so to speak, and I assume of course. This disconcerts me because I would assume that there would be a single progres bar/loading screen, rather than two. If this is normal behavior, please tell me, and if not, do you have any ideas about what I could do to fix this?
Thanks!Batteries
-
The site I am referring to is one using Wordpress & a member management plugin called: S2member. This issue only happens in FF, I tested it in Chrome, but not problems. Just started after the new update.
Hoping its a bug you can help with.Only Firefox 9 seems to have that problem. Firefox 8 and Firefox 10 (beta) and later work. It helps a bit if I disable javascript.options.methodjit.content, but then it still takes 4 seconds compared to 0.2 or 0.3 seconds with the other Firefox versions. So that looks like a bug with the JIT compiler.
-
My6 month old ipod touch will no turn on. I have tried holding both the power buton and the home button to no avail. I have it plugged in and still nothing. Any hope for restoring it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I tried to find somewhere that services them but? That's itunes for you, and the ipod, itself? I would never recomend ipods for anyone, because there isn't any place for you to get them fixed, I guess that they are just throw away cameras in the same sence, if it doesn't sharge any more, throw it out I guerss?
What does iTunes have to do with it? And where do you live? Do you have any shops that do repairs on small electronics and/or smartphones?
You can always go here: http://www.iresq.com
Or you can do an out-of-warranty replacement with Apple: https://selfsolve.apple.com/agreementWarrantyDynamic.do -
i have windows 7 installed 64bit, more browsers are already operating (opera, avant, flock, chrome..) not experiencing any troubles at all with my OS.
Use GPP for this. Do not use a script. Post your issues in the GP forum.
You should also visit the RDS forum to get information on how to distribute remote app links.
¯\_(ツ)_/¯
Maybe you are looking for
-
Table for the cheque cancellation
Hi Gurus, I have a requirement like: Doc Posting is date is: 15/07/2014 and payment date is: 16/07/2014. Aging should be calculated? The Biggest task is: Say they had a posted a vendor liability document on 15/07/2014 and payment has been made for th
-
Errot while activating ODS in BI 7.0
Hi guys, I created a ODS with a set of data fields and key fields...I am trying to activate it and its not getting activated. A error message is coming up as - Object cannot be activated. please help thanks, Vikki.
-
How to make ALEAUD to be sent immediately to XI
I have the scenario SOAP sender->Xi->Idoc receiver. I have exposed the outbound, synchronous message interface as a web service. I want an iDoc acknowledgement (ALEAUD) to be sent to XI immediately after the inbound iDoc has been processed. In the do
-
Is it recommended to switch off all power to iMac, overnight?
-
Can someone please instruct me on how to change the default icon used in the URL bar for an APEX app? Thanks, Blake