I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years, I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months
I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years,
I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation. All other synchronisation areas (eg Contacts, Notes etc) work fine.
I have looked for help through the Apple Support Community and tried many things. I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether. I need to have a properly synchronising calendar on my phone. Do you have any suggestions?
In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine
Similar Messages
-
I have to unplug my time capsule and reboot it. Is there a diagnostic routine I can run or any error detection I can look for?
You are absolutely right.. when apple changed significant features in Lion and Mountain Lion .. they introduced a bunch of issues into networking which are bugs to this day..unacknowledged.. and without much that will fix them.. other than your reboot strategy.. which is like.. well that other OS.. where continual reboots are considered normal.
Old TC may also just suffer from age.. we continually tell people they have a lifespan.. 3years is the reliable span.. after that expect anything.. sudden death.. slow decline.. continual hassles and problems. If the backups are important to you.. then it is telling you in a very clear way.. replace me.. I am no longer happily providing services promised.
Now to specifics.. we don't know what the problem is.. if we knew we could give some work around.
The problem is odd in that it doesn't affect everyone.. if it starts .. people find it starts several months in to ownership.. it is never cured.. or even curable.. something like DNS or ARP table is being lost.. but it is not either of those things.
Is there a diagnostic routine I can run or any error detection I can look for?
Nothing much shows up anywhere. Including the TC log or local logs. It simply has lost the TC disk but not internet.
So.
Some things do help.
I don't know if you have pondini's resources.. TM is a complex piece of software.. it has multiple issues.
http://pondini.org/TM/Troubleshooting.html
Look at A1 .. load the widget.
A5 .. verify the backup.
A4 .. reset TM.
All of those things can help.. look at some of the typical problems.. C12 and C17 being the most common since Lion.. and exacerbated in Mountain Lion.. not fixed.
Some suggestions.
1. Keep names short, no spaces and pure alphanumeric. See C9 http://pondini.org/TM/Troubleshooting.html
2. Do not use 7.6.3 firmware... go back to 7.6.1 or even better 7.5.2 on an old one.
Firmware downgrade is easy in new utility. Hold down the option key whilst selecting version.
3. I recommend a very short dhcp lease time.. 20min for example. In whatever device is the router .. that can help keep things up to date.. and use dhcp reservation again to see if the address info helps to keep things updated.
4. Do turn on ipv6 local link.. which you need to anyway with 6.3 utility.
http://support.apple.com/kb/TS4597
5. If you are using a desktop.. an external drive is faster.. more reliable and easier than TC for Time Machine backups..
6. Consider using CCC or another backup software.. if you want to continue to use network drive.
7. Although using 6.3 airport utility has some advantages.. it is also devoid of a lot of tools that are in v5.6 airport utility.. well worth loading into at least one computer on the network.. if you only have Mountain Lion now here is one method.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0 -
I was hacked and had to change my yahoo passwrd. I cannot get my iPhone or iPad to accept my new password so I cannot receive messages on either. I had not problem changing my password on my apple computer. Please help! What is the secret?
Delete the account on your phone & iPad. Then set them up again.
-
How can I get photoshop elements to work on my mac with Yosimite??
Yes, that is correct. The organizer is just a database, so your photos are wherever you put them intially. Did you import from iphoto? In that case, organizer does make duplicates (to avoid writing into the iphoto library, which would be a Bad Thing to do). If you didn't specify a location, the copies that PSE uses will be inside subfolders in the Adobe folder in your Pictures folder.
-
The update to Photo Effects (Lite) v 3.0.0 won't work. I've tried for several weeks without any result. I press the download button and it disappears, then reappears again. Can any one help, please?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ appstore.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. -
I setup my iCloud account on my iPhone 5 with the wrong e mail address, and I don't remmber the password, I reset my tel and erase all the information on my iPhone in order to try to set up a new iCloud account but when I restart I have a problem agaIn , they ask me to put again the old iCloud user account and password, what I can do in order to start the phone when I don't have the correct e mail and I don't remmber the passcode.?
I have the same problem as the emails go to my iCloud account that I cannot access!!! I cannot answer the security questions as someone else must have set up my iCloud account. Nothing seems to work. It would be great if someone has some ideas as what can be done to recover the situation?
-
I Can no longer synch my iPhone and iPad to Outlook using iTunes on a Win 7 Pc. I updated to iTunes 11.1.4.62 a few days ago. Don't know if that caused my problem. I've reset the Synch History, deleted any Notes in Outlook that don't have a subject. Grateful for any help.
You might have better luck in the iTunes for Windows community. I'll ask the hosts to relocate your post.
iTunes for Windows -
I have Photoshop Eleent 12 and use a Windows PC. I hae been using a Canon EOS 50D for several years, which uses a Compact Flash Card. I have always downloaded pictures by using a card reader wich I connect to my computer. I Go to the Organizer, click on "Import" and select "From camera or card reader". Once on the Photo Downloader, I select the pictures, chose the folder and click on "Get Media" and all the photos get downloaded. Today I folled the same procedure as always, but ZI'm gettig an error message that reads"Import Failed" followed by another message that reads "Nothing was imported. The file(s) or folder(s) selected to import did not contain any supported file types, or the files are already in this Catalog." I'm puzzled by this message and don't know what to do o get my photos. Any suggestions?
The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.
-
Since updating to LR5.5 it crashes about every 5-10 images while working in the development module. Computer is PC Windows 7 Home Premium. I have been using this computer for several years with zero problems. Is this related to the updating? What is the fix?
Do you get an error message? If so, what does it say?
Do you get a Blue Screen?
Does something else happen? -
I keep getting the message "The application could not be downloaded. The installation could not be started." with a "Retry" and "Cancel" button, I have been re-trying for several hours to no avail. What is the problem?
You'll need to contact support and have them check your account
https://expresslane.apple.com/GetproductgroupList.action -
my iPhone 5 randomly switched itself when somebody was calling me and now won't turn on. it had 90% battery, I've tried factory reset, connecting to iTunes and nothing works. the phone is approx 18 months old so surprise surprise out of warranty.
My 5S just started doing this on Thursday: every fraction of a second or so it oscillates between connecting and disconnecting with the charger (USB or wall, doesn't matter). Since it's still under the limited warrantee, I took it to the local Mac dealer (I live in a small town w/out an Apple store) and they shipped it off. I'm waiting now for the replacement--telephonless, too!
What concerns me is that many people seem to be having this issue.
You were right to be suspicious of the Apple store employees. Once they replicated the behavior that you experienced, they should have immediatly offered to exchange your phone. Anything else, in my opinion, is unacceptable. As long as your phone is still doing it, I'd go back, ask for the manager and tell them to exchange your phone. -
When i update to the latest version (7.0.3), there is a message appear to me when i open any application that contains notification such as (What'sApp or BBM) , this message said (Connect to iTunes to use push Notification) , How I can to stop these messages that appear to me constantly?
Hi,
One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
Any idea how can this problem be solved?
It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
Thanks -
I have been a Quicken user for many years but have heard that the move to Yosemite is a Quicken nightmare - so I'm trying to research new software. I'm overwhelmed by the number of available programs, all the things that each program can do and perplexed by the arguments for and against each feature in each program.
My needs are relatively simple for my small business: 1) I need to be able to import years worth of Quicken data into the new program 2) I need to easily print checks 3) I need to easily reconcile my checking account each month and 4) I need to generate basic reports for my accountant (e.g. P & L statements, category summaries).
I have been a FileMaker user since 1.0 so I don't need (or want) A/R, A/P, inventory management, invoicing, etc.
I just need a solid, dependable electronic checkbook per above.
Suggestions?Bobreba wrote:
I am using Quicken Essentials 1.7.4 on a [Mac Pro, 2.8 Ghz Quad Core Intel Xeon with 16 Gb of memory], running 10.7.5. I am in the process of upgrading everything to work on Yosemite and Quicken seems to be the most difficult problem to overcome.
Thanks for your response and feedback.
I would recommend you continue with Quicken Essentials. As noted by others, it performs well on Yosemite.
My personal experience is Quicken 2007 for Mac also on 10.7.5 (with many reports of it both updated and successfully running on Yosemite) and I personally would not touch Quicken Essentials with a 10 foot pole -- BUT, if it ain't broke for you, don't fix it! -
I am trying to add tracks which I have on my itunes library on my pc to my ipad. I have done this manually but the status bar never gets beyond "preparing to update". I have used itunes for years but never had this problem before
When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547
-
I downloaded Firefox 7 and when I click on the browser icon nothing happens, the browser does not load on desktop.I had no problems with Firefox 4 I had been using for several years and liked very much
Most people have no problems with installing firefox as an upgrade, but there are quite a few things that can cause problems. Please have a look at the articles
* [[software Update Failed]] <-- clickable link (blue ) --
* [[firefox will not start]]
* [[firefox does not work]]
Post back after you read them and say what you tried. Have you ensured you used an admin account, possibly needing to check the UAC setting, and that security software is not blocking the changes. You should certainly try starting in firefox's [[safe mode]] either from a menu/icon option or by holding the shift key as you attempt to run firefox.
Is the browser icon you see on the desktop, and a firefox icon ?
Maybe you are looking for
-
My iMac suddenly goes to sleep
My I hear some views why my iMac (intel core duo2) goes to sleep suddenly, i.e., even just say browsing the web or doing this message. Thank You.
-
My K1 screen is frozen and no any respondences
Hi, I can not unlock the screen as the screen is locked or frozen so there is no respondence. I tried to shutdown it and restart but it still stays at the first page. Is there any methods to reset it? Thanks!
-
Just installed PSE for Mac, opened the first tutorial, and they refer to the "Home" icon for organized photos. Altho they say it is for v.8, it is really v.7. I cannot find any method of organizing photos, nor retrieving and storing them. The help a
-
Windows XP runs slow under bootcamp
Back in 2006 I installed the beta bootcamp on my iMac and loaded winxp. All worked fine. Sometime after the beta expired my winxp started to run phenomenally slow (taking minutes to register a single keypress or mouse click). Virus scanner showed no
-
HT1711 Jewel case printing overlaps and is not readable. What is the problem?
When trying to print the jewel case of a playlist, the printing is overlapped and unreadable.