I have a set of 3 USB disk connected to my TC via a USB hud. I usually swithc the TC at night. When I restart the next day it stucks in amber state. when I disconnect the USB hub where my discs connects and restart, it start properly. Any hints?
I have a set of 3 USB disks connected to my Time capsule (TC) via a USB hub. I usually switch the TC at night. When I restart the next day it stucks in amber state. When I disconnect the USB hub where my discs connects and restart, the TC will start properly. Any hints?
LOL.. don't switch off the TC.. this is fairly typical behaviour..
Or try a different usb hub.. but you could well and truly run out of hubs before you fix the problem.
Are you running latest firmware for your TC?
What error message is coming up in the airport utility.. amber led is a fault indicator.. look up what the actual fault is and see if it is for instance overloading the usb. You are using a powered hub??
Get one bigger USB hard disk instead of 3 smaller ones.
Similar Messages
-
The "Copy on Import" button is greyed out. How can I enable it so I can disconnect the external drive?.
"Copy" is normally used when connecting a camera or card reader.
Simply copy or move folders from your external drive to your computer hard drive, then from the Organizer menu click:
File >> Get Photos & Videos >> From Files & Folders
Then navigate to the new location on your internal hard drive. -
From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software. I registered and activated the software last year. When I click to activate, I get a message that I am not connected to the internet. I am connected. How do I get Editor to work?
You would get the redemption code, or perhaps even the serial number, from whomever you purchased the software from, apparently Amazon, so talk to them. This wouldn’t be the first time they’ve sold something that didn’t have all the numbers needed to license it.
A redemption code is something that is usually on the inner disc packaging if you purchase the media in a box, and there is a barcode on the outside of the packaging that must be scanned at the checkout register to activate the hidden inner code so you can redeem it at home on that website. This is what happens if you buy PSE from a brick-and-mortar store like Best Buy. I don’t’ know what happens if you purchase the downloaded version as I have never done that.
A redemption code is 24-digits of letters and numbers that you enter into a website to get a serial number, once and only once. The serial number of only 24-digits, no letters, is what you enter into the software during the install or when you run it and it asks if you want to register or run in a trial mode—whatever the exact phrasing is.
In any case it sounds like you don’t have either a redemption code or serial number—although perhaps something is listed on the purchase confirmation or your account online at Amazon or even in an e-mail from Amazon. -
I have a macbook pro. The wireless is always conected but it keeps stopping uring browsing for some minutes. However i am using teh same wireless on my iphone and it wok normaly without any stop or cut. Any help please?
I'm having the same issue. Different programs though, it's mostly browsers and adobe products. I thought maybe it was heat related but it's not. It seems that as soon as Lion was about to be released, the updates were updating in preparation for Lion. I delayed updating the software updates because Adobe (my career) isn't totally compatible with Lion yet. Before I even started getting update notifications, though, within the recent week, it's freezing up constantly. I don't know what to do. It seems to be happening with my brower choice, I'm using Firefox and Chrome as my main browsers. I keep alot of sessions open but that shouldn't cause (and has never caused) this constant freezing issue. I did install some extensions in Chrome and Firefox, maybe that's the problem... The issues began after those were installed though, 3 weeks to a month later... Maybe the software updates (that I installed thinking it would correct the freezing issue), maybe they are preventing other browsers ? Maybe Apple is getting rid of Chrome and Firefox ? I'm not having issues with Safari (yet) though I just opened it for the first time in 2 months... only because the macbook is freezing (and it's also rebooting while asleep, closing all of my projects and not saving them)...
My Macbook Pro is the same year and the HDD is a year new. The manufacture recall had the video whatever replaced a few months ago.
I've never had these kinds of problems with an Apple computer. I'm using Snow Leopard and I'm very attached to this laptop ! It's configured perfectly.
Why oh why does it freeze constantly within the recent 1-2 weeks ?
Someone please help us ! -
I have a 2009 macbook pro and my email account is doubling every message I get. I've had it for about 3 weeks and this just started. Any help? Every time I get one email, I get 2 copies of the same message.
This discussion may prove useful:
http://forums.macrumors.com/showthread.php?t=88279 -
when i tried to backup my contacts from my i phone 4s to be in i cloud, it dosn't work and i can not find any contact uploaded, plz help
Sorry no backup - no pictures.
Yes phone will automatically backup to icloud when on wifi and phone is charge, but your phone storage was full so it stop backing up.
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
iCloud: iCloud storage and backup overview
When your phone was connected to your computer, you should've seen an autoplay which would've allowed you to import your pics to your computer as you would a digital camera Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support -
Hi. I`ve just started transferring from my old Imac to a new Macbook, using the WIFI. But I realize it will take days to get it done. Can I cancel the process, and start over again using the thunderbolt port? Without causing any trouble?
See Pondini's Setup New Mac guide for possible answers.
-
Captivate demos stuck in Loading state when shared in an Adobe Connect meeting room
We have published several Adobe Captivate demos directly to Adobe Connect content library (using both Captivate 5.5 and 7). The demos work fine when accessed directly using the URL assigned in the Content Library. However, when the demo is shared in a meeting room share pod, it gets stuck in Loading state and nothing is displayed. Trying to understand if this is a bug or if there are certain publishing settings in Captivate that are causing this problem.
Have you looked at the logs on the Connect server (Error or Access) to see if there is something there to help identify the problem?
If you put ?mode=xml after you meeting room, do you get any clues about the problem in the text that shows below the connection error message?
Have you tried the test my computer page to see if there is a problem that can be identified there? -
I have a 6 week old 4s running 5.1.1. Started recieving "failed sim" message yesterday. this leaves me with no cell service. Shutting down and turning back own seems to alleviate problem temporarily. It has happened three times now. Help.
Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host> -
After my Macbook goes into sleep mode it sometimes won't wake. The keypad lights up but the screen stays black. This problem has only occured after updating to OSX 10.7.2.
All I can do is switch off and restart. Then any programs I have not 'quit' all open.OK, I have a fix.
After spending about an hour online with Apple Care without success, I did a reinstall of the Lion OS. It fixed the problem. I was concerned that I would lose data or settings, but the reinstall was seemless and everything was the way it was before the reinstall except that the "black screen on wake" problem was fixed.
I started the reinstall before I went to bed and it was waiting for me the next morning.
Here is a link to the page on how to do the reinstall:
http://support.apple.com/kb/HT4718?viewlocale=en_US&locale=en_US
Hope this helps. -
Mac OS X 10.8 crashes after disconnecting the Thunderbolt display
Wondering if anyone can help my Mac OS X 10.8.5 crashes after I disconnect the thunderbolt display.
I normally work in the studio with my macbook connected to an external display.
When I go to use it without the thunderbolt display it crashes - 4 times in one day, which really isn't ideal when your freelancing.
I've checked my log files and I have a list of panic reports. I'm not too sure what I'm supposed to be looking for, but each of the reports refer to the graphics control. I've read online it might have something to do with the display sleep, so I've reset that.
GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff808013e000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.5/src/AppleM uxControl/kext/GPUPanic.cpp:127
I'd be very grateful if anyone could help
ChloeHi Chloebat,
I'm sorry to hear you are having issues with your MacBook Pro. If you continue to have intermittent but persistent crashing issues with your Mac, possibly related to the display, you may find the troubleshooting steps outlined in the following article helpful:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden -
Making a button programmatically not change its 'physical' state when pressed
I have this button:
which changes into this when pressed:
How do i programmatically make the button not change into its 2nd state when pressed? do i use property nodes? if so, how?
thanksIf you use the Colors Property Node, you can change the colors dynamically, so you can set it all green when you need it, then change it back to green and red.
The only way you can intercept the button press is to use the Mouse Down? event in the event structure. You will need to verify a left mouse click and then Discard the event. That will be your inidcation the button has been pressed. However, you will still need to track your state to not discard the event in the situations where you want the button to actuate.
It is much easier to dynamically change the colors. -
I purchased tv shows for my son over 4th of July weekend from iTunes on my iPad...he has been watching with no problem...yesterday I backed up my iPad and the videos were taken off while I was syncing it. Error coming up states " warning some of the videos in your iTunes library including video "Dora" were not copied to the iPad "ellen's iPad " because they cannot be played on this iPad was not copied because the video format is not supported by the iPad.....makes no sense since he watched the video on Friday on my iPad...I went into the properties of the video and under the summary tab states kind of video is mpeg-4video file...went into the folder on my pc and the file is listed as a m4v file...under the tab tv shows when my iPad is connected I have it checked to sync tv shows and to automatically include "all" episodes of "all shows" ....
I am using version 4.3.4 on my iPad and iTunes version 10.4 ...I even restored back to the original settings and still did not work....called apple twice yesterday and spoke to 2 different people and no one could help me.....I am able to load a movie from my pc to my iPad with no problem and the movie is a mpeg-4video file....totally clueless...I kept having a similar problem - 3 out of the 10 videos I had on iTunes wouldn't sync. They were in the right format and I KNEW they worked on my iPod because I'd RECORDED them on my iPod. I finally figured out what to do! Go to the movies in your iTunes library. Click on one that does not sync. Click on "Advanced" at the top of iTunes and choose "Create iPod or iPhone version". Once that's finished, be sure you delete the old version so you don't keep getting the error (or have 2 copies of the same video) and sync. This should eliminate the problem. At least it did for me!
-
I plugged into iTunes and now all my notes on my phone are gone. Years worth of notes that I stupidly don't have saved anywhere else. Can someone tell me what to do to get them back?? I have iTunes set to back them up but can't find out how to retrieve them.I plugged into iTunes and now all my notes on my phone are gone. Years worth of notes. Can someone tell me what to do to get them back?? I have iTunes set to back them up but can't find out how to retrieve them.
After you restore from backup, you MUST sync to restore your iTunes content. No iTunes content is included in the iPhone backup. Your apps should be in your iTunes library, just sync them back to your phone. If for some reason your apps are not in your library, you can re-download them for free:
http://support.apple.com/kb/ht2519 -
I think it's a Lion problem. I had this problem with an old Dell True Mobile wireless router, and hoped it would go away with a new Airport Express router. Same problem. I checked online and saw a lot of message boards featuring questions from people that suffered the interruption of their wi-fi connection, some with Macbooks others with iMacs like me. The problem happens when I don't use the computer for a few minutes. It goes into the Idle mode, kind of like sleep. The connection is severed and the time clock upper right stops. It's weird. There was supposedly an Apple update that addressed this issue, so at the Genius bar two days ago I updated to 10.7.3, downloaded and installed the update. Didn't work. Is it Lion? Is it a wireless card issue? Very frustrating. I subitted a genius bar work authorization with another Apple Genius Bar support tech the next day. He ran some tests. Cryptically said he knew that Apple knew about this and was working on a solution but couldn't tell me what it was. Submitted my info and said I'd be contacted by an Apple tech within 48 hours and provided with a link to another download of another update that should "fix" the problem. I don't know what to do.
I FINALLY SOLVED THIS ISSUE!!!!
New routers have "mixed" modes for your network; this means that it will automatically choose the best option between wireless-B, wireless-G and wireless-N network modes. I used to experience this issue using the 2.4 GHz. mixed mode wireless network.
Thankfully, my router can create 2 networks: a 2.4 GHz. network and a 5 GHz. network.
When I randomly changed this value to "use only wireless-B and wireless-G" trying to fix an issue with a wi-fi expander, the iMac wi-fi issue dissapeared! I tried it with wireless-N only, but it didn't work.
So, finally, I have a 2.4 GHz network with only wireless-B and wireless-G modes which works PERFECT with the iMac, and a 5 GHz. network with a mixed* wireless mode for everything else mode.
*PD: by "mixed" mode it means that the router will automatically choose between B, G and N network modes as it fits better.
Maybe you are looking for
-
How to change the langage pack in the N958GB ?
How to change the langage pack in the N958GB ? I bought this N95 8GB in greece and it has only greek/english How to put french/english ?
-
What are restrictions on adding memory
IMac with 4GB memory (2x2GB in two slots) can I add 2x4GB in remaining slots for total10GB memory
-
Datasource set to NONE after classic to EPMA conversion
Hello everyone. We recently transformed a classic Hyperion application to EPMA. Everything seems to be alright and the application is working fine after conversion. However, when performing application deploys, we've noticed that the datasource appea
-
Dear Gurus, my client is now entering P.O for the month of April 2008. now, when they are making p.o for April month, today's date is appearing in the p.o. then by mistake they are processing it. how do i make
-
DT message on login and automatic logout
Hi, a user booted the Solaris 9 (SunBlade 150) and proceeded a normal login. The DT Message came saying to check /etc/hosts and other files, and did automatic logout. The /var/adm/messages entry is this: Jul 18 15:59:26 `hostname` dtsession[688]: [ID