I have a split screen with two site. All the suggestions are not working.

Everytime I load Firefox, I get a split screen with two sites on it.
I have tried the resetting of home page and clicking off the icon to not show the site selection page.
I have facebook on the left and it cannot be expanded bigger than a panel. I have a 3/4 screen of what ever web site I wanted to load.
How do I turn this off?
Nothing is working and I cannot imagine how it happened.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Opening in the sidebar is the default for bookmarks that are created via a link or button on a website.<br />
You can check the Properties of a bookmark via the right-click context menu in the sidebar (Ctrl+B; Cmd+B on Mac).<br />
In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.<br />
Make sure that "Load this bookmark in the sidebar" is not selected.<br />

Similar Messages

My iphone screen is black and all the buttons are not working

The screen of my iPhone 4 suddenly went irresponsive and within a few seconds it went completely black. I tried to power it off and also tried the home button but nothing seems to be responding.
Incoming calls still ring out but I am not able to answer the calls and cannot see anything on the screen.
I connected it to my laptop, the iphone appears on "my computer" and I was able to see pictures and videos that are on the phone, however iTunes cannot detect the devise.
Any help please?
Thanks

The phone is now working
I followed the steps in the below link
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thanks

My mac froze in an application so I shut it down by powering off with button, now when I try to turn it on I have a grey screen with Apple loge and the timer swirling but it doesn't get past this, please help!

I Shut down my Mac by holding in the power button after my iMac froze and now when I try to turn it back it on all I get is the grey screen with Apple loge and the timer and doesn't get any further. I have tried the diagnostic test but nothing was found.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

MAC OSX 10.3.6 having Boot Problems(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!

Hi Frnds,Small Favour for me,...
MAC OSX 10.3.6 having Boot Problem(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!, Windows 7 is working perfectly , can i restore any files in MAC OSX 10.3.6 through Windows 7, or i need the MAC OSX 10.3.6 Bootable Files i need to enter the MAC OSX....

Hi Frnds,Small Favour for me,...
MAC OSX 10.3.6 having Boot Problem(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!, Windows 7 is working perfectly , can i restore any files in MAC OSX 10.3.6 through Windows 7, or i need the MAC OSX 10.3.6 Bootable Files i need to enter the MAC OSX....

I have a gray screen with white lines at the top

I have a gray screen with white lines at the top what does that mean?

Hi,
Time to take it to an Apple store or Apple certified repair provider.
iPod Nano support here. http://www.apple.com/support/ipod/
Carolyn

Pie chart with two measures and date dimension navigation not working

Hi Experts,
Pie chart with two measures and date dimension navigation not working. Any help is appreciated.
Thanks
V

Hi Deepak,
I had time dimension in the RPD.
I have stacked bar chart with same time dim like year & month in the report. when I go to legand and set navigation it is working fine. But not with pie chart.
I am not not sure what is the problem. When I click on Pie chart it is not navigating to the target report. Can it be any other issues..???

So my phone a 4s is less than two years old, the speakers do not work, and it will not connect to wi-fi, so my question is on the 1st of august why should I re-up my contract and purchase a phone that taken care of did not last the distance of a contract?

So my phone a 4s is less than two years old, the speakers do not work, and it will not connect to wi-fi, so my question is on the 1st of august why should I re-up my contract and purchase a phone that taken care of did not last the distance of a contract?

This is a user to user technical support forum. It is not our responsibility to convince you of anything.
Do you actually have a technical support question? If not, post your question on a blog or somewhere more appropriate.
Best,
GDG

I just to a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

I just bought a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

Hi there,
It sounds like your purchased content is not transfering via a flash drive. It may be easier to re-download this contnet directly from iTunes. Take a look at the article below for mor information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
-Griff W.

I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4

I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4 files. Now, they are not compatible. How to I get them into imovie?

Hi
I use
• DV-PAL or DV-NTSC - or -
• AIC
Yours Bengt W

My MacBookPro is continuously buzzing, the backlights are not working although it should be on. Tried to cover the sensor, but it's not that. Also, it's telling me that I have no batteries and the charging is not working either.... Any help? PLEASE!!!!

My MacBookPro is continuously buzzing, the backlights are not working although it should be on. Tried to cover the sensor, but it's not that. Also, it's telling me that I have no batteries and the charging is not working either.... Any help? PLEASE!!!!

Intel-based Macs: Resetting the System Management Controller (SMC)

Hey there, my ipad had a dialogue box pop up on the screen and the buttons are not working so i cant exit out or type. PLease help me

hey there, my ipad had a dialogue box pop up on the screen and the buttons are not working so i cant exit out or type. PLease help me

Perform a Reset... Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

HT204379 I have pointed to my pictures folder and all the pictures are 1mb in size with a lowest resolution 4416 × 3312. Why do I still get blury images in my shifting titles screen saver?

Hello,
I have just moved to mac and pointed my screen saver to my pictures folder and all the pictures are 1mb in size with a lowest resolution 4416 × 3312. Why do I still get blury images in my shifting titles screen saver?
Regards,
Jan

finally found it
http://lifehacker.com/5711409/how-to-search-for-hidden-packaged-and-system-files -in-os-x
need app find any file
link at bottam

TS3048 I am usng a bluetooth keyboard with my Mac and some of the keys are not working. They are the numbers 1 through 9. I have gone through the troubleshooting for mouse and keyboard and everything looks good. How can I get them to work again?

Hi, I am using a Mac computer that my husband set up. I have worked on it recently with no problems. Today, I am having problems with the bluetooth keyboard not working properly. The numbers 1 through 9 do not work. I have gone through troubleshooting wireless mouse and keyboard issues and everything looks good. Except, when I check the keys on the keyboard viewer, these keys still do not work. The webpage guides me through and at this point I do not know what to do next, because the keyboard is still not working properly. I sure hope there are some experienced people in the community to help me. What should I do?

Hi:
I wish my suggestion had gotten you further.
I do suggest you try to connect the keyboard again. The request for a number is a step in it trying to pair. If it gets by the number, it sometimes takes a little while to get connected. If you are unable to get it connected and want a new one, I have been using Apple Bluetooth keyboards for years - and I like them. The one I have (the newest model) only uses two batteries and is very thin.
Speaking of batteries, if you are not already doing so, you might consider rechargeables. I have a drawer full of them and use a 15 minute charger. I go tired of buying batteries and rechargeables are environmentally friendly to boot. At the moment, I use 2450 mAh Energizers and a 15 minute Energizer charger (all purchased new on eBay at a very reasonable price).
I am far from an iPad "expert," although I have one. If my suggestion below does not help, post your question in a separate thread in the iPad forum.
I had a terrible time syncing my iCal on my Mac with my iPad iCal (confusing - hopefully it makes sense). I quit using iCloud as that added to the confusion. There is a facility to one-time sync items. When you connect your computer to your iPad, iTunes opens. The system begins a process (automatic backup and so on). After it finishes, you can click on "info." At the bottom of the screen, there is an advanced section. You can select any of the items and then force it to sync. The iCal information from your computer would be deposited on the iPad.
After all that, I do not use a Google calendar so the information may be worthless to you.
If you want to reset the iPad to factory settings, you can do that when it is connected to iTunes (one of the options). Me being me, I try never to erase anything.
Barry
Message was edited by: Barry Hemphill

I've updated to iso5 on my iphone 4 but some of the features are not working like the lock screen camera feature. Have I done something wrong?

I've updated my iphone 4 to ISO 5. I could not connect to icloud yet however does this expalin why some of the features of ISO 5 are not working like the camera lock screen feature?
Thanks
C

to see the camera icon, double-click the home button when you are on the lock screen. this will show the music controls and the camera icon. double click the home bgutton again to close them.

Changes done for the Site in the BCC are not reflecting in the Production

Hi,
we are using ATG10.0.2 BCC, application is based on CRS10.0.2
changing the asets for a site in BCC and deployed success fullly changes are there in the BCC but those are not affecting in production
In Production configuration of BCC i mapped Source Repository atg/multisite/SiteRepository with Destination Repository: atg/multisite/SiteRepository_production
please help me to reslove this issue
Thanks,
Chandrakanth

How about checking this?
Login into the DB and see if you have values changes getting reflected in the CA DB and prod DB.
If values are getting reflected in the DB then clear the cache of the repository.
If the values are not getting reflected in prod db then check the datasource property of that repository.
Peace
Shaik

I have a split screen with two site. All the suggestions are not working.

Similar Messages

Maybe you are looking for