I have a touchsmart 520 pc and installed windows 8 but it says the hp software is not compatible
I am running windows 8 on an HP TouchSmart 520 but it says the HP Software is not conpatible with windows 8 is it possible to get a compatible version
When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP makes hundreds of TouchSmart models that are all different. Without this information it may be difficult or impossible to assist you in resolving your issue.
THIS is HP's position on Windows 8 support and any HP computer not supplied with Windows 8;
Not all Windows 8 features may be available on all PCs.
Your particular experience with Windows 8 will be determined by the capabilities of your PC.
HP is providing upgrade instructions and drivers will be available for most Windows 7 systems sold after 1st October 2011.
If you want to restore the original operating system after upgrading, you must create HP recovery media before you upgrade.
Please note that if you purchased your system prior to October 1, 2011, HP has not tested these PCs or developed Windows 8 upgrade instructions or drivers for them. Upgrading such systems may be difficult or impossible.
and
Important information regarding additional limitations and requirements;
Screen Resolution Requirements
Limitations with DVD playback software
Limitations with Blu-ray playback software
Limitations with TV Tuner software
Secure Boot & other UEFI dependent features
Secure Boot & other UEFI dependent features
Limitations with touch screen capabilities
Windows 7 PCs with touch screens will not have full Windows 8 touch capabilities after upgrade.
HP PCs with touch input hardware designed for Windows 7 will provide a comparable experience for only two touch point applications after the upgrade to Windows 8. HP Windows PCs with touch input hardware will not support Windows 8 applications that require more than two simultaneous touch points.
Additionally, Windows 8 edge swipes may not be available due to the recessed bezel on HP touch systems shipped with Windows 7.
HP TouchSmart Magic Canvas and HP TouchSmart applications are not compatible with Windows 8 and must be uninstalled before upgrading. Note that content created using the TouchSmart applications such as Graphitti will not be available after upgrading.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240
Similar Messages
-
My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?
You already have the software installed that you need if you have 10.8.2.
If AirPort Utility cannot find the Express, that is another matter. More software is not needed. More troublehooting is needed.
Power up the Express for a full minute
Hold in the reset button on the Express for 7-8 seconds and release
Allow a full minute for the Express to restart
Click the AirPort icon at the top of the Mac's screen
Look for a heading of New AirPort Base Station
Just below that, click on AirPort Express
What happens? -
Formatted USB and installed windows but cannot reformat drive
Recently ive tried to install windows onto my laptop. I formatted USB and installed windows but cannot reformat drive the drive. I even tried to have bootcamp reformat the drive and it says it cant. I opened disk utility and it cannot do anything to it. I just want my flashdrive working again.
Your USB flash Sandisk is correctly formatted as a FAT disk and called Wininstall when you used Bootcamp Assistant and checked the second check box to download BC drivers.
If you are unable to see the FAT partition which will become NTFS for you Windows installation, that is a different issue.
Have you looked at https://help.apple.com/bootcamp/mac/5.0/help/ ? -
I have tried to download apps and a window pops up saying apple id has been disabled. I have reset my password and it is still happening! Help
EdwardGlenn wrote:
Lol the U.S.A.
And I would have no way of knowing that since you are not showing a location in your profile. This forum has users from all over the world looking for support.
Anyway, good luck. I hope that you are able to get this resolved quickly. -
How do you grant permission for home sharing and authorizing? My mac did home share, but now says, "The required directory was not found or has a permissions error", when I try to authorize.
OK, I just got off of the phone with Apple and still no joy. They had me try a few things that did not work, then told me to Archive and Install, which did not either. Anyway, thanks for the additional help very note worthy, but still no joy. Also an email to iTunes Support took me here
http://docs.info.apple.com/article.html?artnum=93061
I have a Users/Shared folder but since the files we are talking about are invisible, I can see how it is structured.
And by the way I tried this one
http://discussions.apple.com/message.jspa?messageID=3577004#3577004
and it did not work. However, when I install a fresh copy of Tiger on the external it did authorize the computer and was able to play the downloads. But coping the invisible file to my boot drive was not successful. But , like I said the music did play when I started up from the external. So I guess that may be my only solution, unless someone can tell what the correct directory is and where it for iTunes downloads. -
i'am using iphone 5, i tried to update the ios 8.0.2 using the shift key in itunes update @ windows 8 i have the file which i downloaded, but it says that firmware version is not compatible. what can i do for it . help me friends
Hello vinoth1986,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning update issues:
If you can't update or restore your iPhone, iPad, or iPod touch
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
I am trying to update my itunes to the latest version, but it says the itunes server could not be updated and i need to connect to the internet when I amlready am connected. How do I get the latest version of itunes so i can sync my iphone with itunes without losing all my songs?
We were able to fix our machine! I just could not make sense of the error message, so we were trying non-Microsoft, non-Apple solutions.
Our Solution: Install MalWareBytes, and run a Quick Scan.
Even thought both Microsoft anti-virus and Defender were running on our Windows 8 machine, MalWareBytes found about 100 problems. As I looked over the types of problem and locations, I found several that referenced the exact directory referenced in this message. The machine had to be restarted for MalWareBytes to complete the cleaning, but iTunes installed afterwards with no problems.
Thank you MalWareBytes! -
In using bootcamp to partition and install Windows on my computer, I keep hitting a snag. Message says that partitioning can not be completed because files can not be moved. I have tried several things but nothing seems to be helping to move the process along. What should I do?
Welcome to the Apple Support Communities
In most of the cases, that message appears when there's a problem with the filesystem, so you have to repair the disk. This doesn't mean that the hard drive is damaged.
First of all, open > About this Mac, and check Version. If it's 10.5 or 10.6, insert the Mac OS X DVD of the version you are using and press C key while your Mac is starting. If it's 10.7 or 10.8, press Command and R keys while your Mac is starting. After doing this:
1. Go to Utilities menu > Disk Utility (if you have 10.5 or 10.6) or open Disk Utility (10.7 and 10.8).
2. Choose Macintosh HD in the sidebar and repair the disk.
3. Restart, open Boot Camp Assistant and follow the steps to install Windows on the Mac -
Hello there everybody! I have installed Windows 7 on my MacBook Pro 2006 15' without any problems, and without any modification. I did hear that some users couldn't install it, but I have got it working fine with BootCamp 4.0.1 on Lion. So anyways, when I boot into Windows, there is no soudn, and there is also a Red Light coming from the Earphone/Headphone jack.
What should I do? This problem is really ticking me off because I only insalled Windows to lay some games my friend recommended to me. With no sound, it would be really strange playing them, especially Mass Effect.Well I / we always kind of assume that someone did all the normal basics first and is still having trouble. And read the instructions in Boot Camp Assistant.
For reference purpose to anyone
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 4.0, OS X Lion: Frequently asked question http://support.apple.com/kb/HT4818 http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
Installation Guide
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/ -
After clearing cash on my mac ( Go to folder: ~/Library/Caches and clear all, than to Library/Cashes and clear all again) applications won't lunch any more..I tried to delete apps like VLC player, firefox.. with app cleaner and again download and install the new one but it's the same..goes for all apps that are not originally part of Yosemite. I have done this cash clean up very often on Maverick without any problems. This time I done it again because I could not open my web site, the server has blocked me and I was trying everything including deleting cash from mac. Please advise me what to do..?!? Thanks in advance.
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
We need more CS6 installations at our company. However, it's not possible to buy CS6, only CC. The software we are using in combination with CS6 is still not compatible with CC. So have have to use CS6 until that software is upgraded. Can we buy CC licenses (or membership) and use that licenses to activate new CS6 installations?
First, yes it IS possible to buy CS6 Creative Suite 6
Second, Previous via Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous -
In the past couple weeks my apps have stopped working and i am unable to use amny of the featurs on my device. Any help would be nice.
There is no such thing as a 3rd generation 8gig ipod touch. You have a second gen.
Identifying iPod models
Basics troubleshooting from the manual is restart, reset, restore. -
I have multiple devices (iMacs, Lap tops, Ipads) all connected to a Nas Drive. Can I create a user for myself and one for my wife and we each have our own apple ID's, Itunes etc, but share the same data on the hard drives? So when she logs in, and sync's her ipads, they will sync with her stuff and when I do the same under my user account, on the same device, my ipads will sync with my stuff?
You can share the same Apple ID for purchasng form the iTunes and app stores without any problems, but you should all used separate iCloud accounts with separate Apple IDs. (You are not required to use the same ID for iCloud and other services as you do for the iTunes store.) This will prevent you from ending up with merged data. You should also use separate Apple IDs for iMessage and FaceTime or you will end up getting each other's text messages and FaceTime calls.
This article may be of interest: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/, as well as this video: http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l. -
Okay, so I have been having trouble with my mail application all week. The window refused to open and would not quit. Today, I tried to shut down my mac and a pop up window told me that I was unable to shutdown because mail was open. After using a key combination, I successfully was able to quit mail with force quit. Then I was able to shut down with out a problem. However, upon rebooting, my computer refused to let me loggin. I put in my password correctly but then the rainbow pinwheel showed up and stalled for a minute and then my screen flashed and the gray screen reappeared, expecting a password. I tried turning it off and back on again with no luck. I also reset my password after reading a similar discussion, but I still can't log in. How can I fix this?
Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup Issues - Resolve
Startup Issues - Resolve (2)
Avast! Uninstall -
this is the entire error message
Error: Platform version '1.9.2.10' is not compatible with
minVersion>=1.9.2.11
maxVersion<=1.9.2.11Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.<br />
Don't remove personal data when uninstalling.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Maybe you are looking for
-
How to Calculate column (Month, Year) from date or timestamp
Hi, Name SQL Data Type Dimension Column Store Data Type Key Not Null Default Comment T_STAMP TIMESTAMP LONGDATE How to generate Month and Year from timestamp field in Analytic View. Please provide me some valuable input. I have searched SCN before po
-
ITunes Match unknown error (-54)
I did the update for OS X and therefore iTunes that was released yesterday, and everything went smooth. Then today I opened iTunes for the first time after the update, and for the first time I got this error: If I click OK it tries again, but the err
-
Photoshop CS6 (13.0.5/Mac 13.0.1.2/Win) Updates Now Available
In case you missed the announcement: Today was released Photoshop update version 13.0.5 (for Macintosh perpetual license customers) and 13.0.1.2 (for Windows perpetual license customers). This release corrects a number of issues. For a list of specif
-
Tax amount(vat ) is not calculated in PO
Hi, Vat tax code I6 for juridisction code WWGB00 rate maintained was 17.5%.And then susequently it is changed to 20% on 04.01.2011. When PO is created on todays date or >=04.01.2011 it needs to be calculated as 20% instead it is calculating 17.5% whi
-
Hi expers, When I tick "Chart Pivot Results" check box, I can use chart in the pivot view, however,I am facing two issue. Firstly, when I use pie chart for showing data, I want to truncate label name . For example, there are two columns named Date an