I have a US Mac living in the UK. I tried to download both the British and American version. Both state "You cannot use the application Firefox with this version of MAC OSX". Any suggestions how to proceed?

I have a US Mac living in the UK. I tried to download both the British and American version. Both state "You cannot use the application Firefox with this version of MAC OSX". Any suggestions how to proceed?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. You can get the latest version of Firefox 3.6 which works on OS X 10.4 from http://www.mozilla.com/en-US/firefox/all-older.html

Similar Messages

  • I get the error message: "You cannot use the application "Firefox" with this version of Mac OS X. What now?

    I have Mac OS X 10.4.11.

    Firefox 4 requires at least OS X 10.5. You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

  • Just downloaded FF4.0 for Mac and it will not open. Says it will not work with this version. what's wrong?

    Used FF 3.1.6 for years just fine. Downloaded FF4 and when I went to pull it from my applications folder there was no icon, just a square saying FF4. Pulled it to the bar and got a message saying "you cannot use the appliction "firefox" with this version of Mac OS X"

    Firefox 4 requires at least OS X 10.5. You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

  • APP-PAY-06041: you cannot use the enter resource form because human resource is fully installed. Instead use the Human resource people form

    hi
    i'm getting this error when i'm creating in projects implementation superuser HR foundation - Enter AND maintain
    APP-PAY-06041: you cannot use the enter resource form because human resource is fully installed. Instead use the Human resource people form
    PLEASE HELP
    Thanks
    Regards
    vijay

    Did you check metalink -
    PERWSEMP When Creating new Employee Using HR Foundation, APP-PAY-06041: You Cannot use the Enter Person Form Because Human Resources is Fully Installed (Doc ID 353323.1)

  • I have updated to OS X 10.9 and now can't open Aperture, message reads You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... all i need to know is how to get Aperture to work again..help !

    I have just updated to OS X 10.9 and now find that I can't open Aperture to access photos etc, message reads : You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... whichj is not a lot of help, i have limited technical ability and all i need to know is how to get Aperture to work again...help !

    Software Update?

  • Got message... you can't use this version of the application mail with this version of Max OS X, after i upgraded operating system to MAC OSA X Snow leopard.  How do I get my Mail?

    Hi ...just upgraded my Macbook pro to Mac OSX snow leopard and when I tried to look at my mail, I got this message "You can't use this version of the application mail with this version of MAC OS X".  What do I do now to look at my mail and receive new mail?

    After updating make sure you repair permissions and restart your computer.

  • TS1572 you can use this version of the application mail with this version of mac osx

    Cannot use this version" alert appears when opening application mail with this version of mac OS X, we seem to have lost our mail and now we get this message.

    Make sure the 4.5 only is in the /Applications folder alone and not inside any enclosing folder, then run the update again. /Applications is inside the main Macintosh HD folder, not in your Home Folder, if you even have one there. Move the other Mail to the Trash for now, but don't empty it yet.
    Link for the update.
    http://support.apple.com/kb/DL1586
    If that doesn't work, move both Mails to the Trash (don't empty yet) and run both updates, the 10.6.8 Combo update (the link for that is in the Apple article) and then the Security update again.

  • You can't use this version of the application "iPhoto" with this version of OS X. just opened this Mac comp having regrets..  uploaded this version because it was offered.. and can't work with pics???? what do I do to resolve this????

    HELP.. I just opened this Mac Pro..  having second thoughts of the gift.. got it to work with pics .. and now it tells me .. 
    "You can’t use this version of the application “iPhoto” with this version of OS X."  "you have iphoto 9.3.2"
    I hav no idea how to use this Machine..

    If you're running Mavericks and have iPhoto 9.3.2 you can upgrade to iPhoto 9.5.1 at the App Store for free.
    OT

  • You cannot use this version of the application Mail with this version OSX

    I just installed 10.5.8 (9L30) via Software Update and now my Mail doesn't work. Instead, I get a dialog box that says "You cannot use this version of the application Mail with this version of Mac OS X." When I run it out of Terminal from /Applications/Mail.app/Contents/MacOS/Mail it runs fine, even though it is Version 3.5 (which is what shows up when I do Get Info on the Mail application in the Applications folder). This is really poor, Apple. This is basic stuff -when you upgrade the OS you have to make sure all the Apps work. How are you going to fix this?

    Thomas A Reed wrote:
    Apple obviously are stupid enough to release an update that broke mail..
    Then how do you explain all the people saying they've had no problems with the update? (Oh, and "Apple are"???)
    Not everyone had the problem. Good for them. More than one person had the problem - and perhaps even more will experience it. That means there is a hole in the update process - i.e. something does not work properly in all situations. Apple is not God - they stuff up sometimes, innit? Stop defending them.
    No matter whether you use a Mac or Windows machine, you need to do some basic maintenance from time to time to keep things working smoothly. Macs, overall, tend to need less, but you still need to check the hard drive from time to time, and you definitely never want to install an OS update if there's a chance you've got hard drive problems.
    So if that's the case, why design an "automatic" Software Update utility that does not do a check of HD integrity if it is so vital to do such a check before installing an OS upgrade? Does that make any sense? Where do Apple recommend such a check prior to installing an OS upgrade? It's not immediately obvious do the average user. Apple have gone out of their way to make claims like "you never have to defrag a Mac". They don't mention anything about HD checks. If it's so fundamental, why not? Is it unreasonable to think that a company that prides itself on good design would think of this?
    Thank you for the link for the consolidated update. That fixed it - except that it should have worked first go from the auto updater.

  • You can't use this version of the application Mail with this version of Mac

    I just installed 10.6 and all seemed well until I tried to load Mail. I got this response
    "You can't use this version of the application Mail with this version of Mac You have Mail 3.5".
    I successfully reinstalled 10.6 and I also reloaded the apps that were contained in another folder on the CD. I get the same message every time I try to load the Mail program. I deleted the "mail plist" file and that did not work. So I recovered my old one from Time Machine. Still dead!
    My poor wife is so frustrated that she is now using my machine!!! HELP PLEASE!

    I successfully reinstalled 10.6 and I also reloaded the apps that were contained in another folder on the CD.
    Why would you "reload" any apps? They should have been installed when you installed 10.6. Where exactly did you reload them from?
    So I recovered my old one from Time Machine.
    ...which undoubtedly still contained the old copy of Mail from your last Leopard backup, and not the current version of Mail that should have been installed with 10.6.
    What you need to do is reinstall the appropriate version of Mail from your Snow Leopard install disk. You can install one specific program from the install disk using [Pacifist|http://www.charlessoft.com> - though, check carefully to make sure it's been cleared for use with the Snow Leopard install disk!
    Whether that will fix your problem or not, I don't know, as I don't know what exactly you've done. It sounds like you've done a lot of things you should not have done, mixing components of your older system into your newer system. It is entirely possible you will need to reinstall the entire system.

  • You cannot use this version of the application iCa with this version of Mac OS x

    Bought a macbook pro from a friend- running 10.5.8. Could not find iCal in the Apps folder. Researched on line and it sounded like I needed to reinstall it from the disk. I did from the original os x disk and when I tried to open it, received the following message:
    you cannot use this version of the application iCa with this version of Mac OS x
    I have two disk for version 10.2. Neither disk offers "optional installs" but the second has "AdditionalApplications.pkg" but doen not install iCal at all. Any help would be greatly appreciated.

    Thanks. That brings up a whole new question- can I run 10.6 on my macbook? The specs are below:
    Model Name:
    MacBook Pro 15"
      Model Identifier:
    MacBookPro1,1
      Processor Name:
    Intel Core Duo
      Processor Speed:
    2 GHz
      Number Of Processors:
    1
      Total Number Of Cores:
    2
      L2 Cache:
    2 MB
      Memory:
    2 GB
    Was told at Apple Store that it would run terribly slow.

  • " You cannot use the application "iTunes" with this version of MAC OS X."

    I am getting the response " You cannot use the application "iTunes" with this version of MAC OS X." How do i get Itunes on my Mac. I tried to download the newest version but it won't let me do that either.

    What operating system version are you using on your Macbook?  If you are still using Tiger 10.4 the new iTunes requires Leopard (10.5) or higher.

  • 'You cannot use the application ical.app with this version of Mac OS X'

    When I first upgraded to 10.5 ical and calculator both crashed when starting and now after upgrading to 10.5.1 I get the following message - 'You cannot use the application ical.app with this version of Mac OS X'
    This is only on my G4 powermac. No problem with Intel MacBook.

    Are you, by any chance, one of "those people" that move applications to something other than the default location?
    I know I am.
    When I upgraded, I saw the same problem - I had moved iCal (among others) outside of "applications" to something like "Applications/Business Apps"
    The version in "Business Apps" was the Tiger version, and it wouldn't run. However, the Leopard version (Installed to /Applications) worked fine.
    So, I deleted the "Tiger" version, moved the iCal to where I wanted it, and all was well.
    In a similar note, I put a number of iLive apps in a different folder -- and OS X software update stopped finding updates for those apps. I had to move them back to /Applications in order to get OS X software update to run them.

  • I get the message "You cannot use the application "AdobeApplicationManager" with Mac OS X

    I get the message "You cannot use the application "AdobeApplicationManager" with Mac OS X

    Hi LegallyArmedAm,
    Are you still getting the message?
    -Dave

  • Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command

    Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command
    and I am getting an Error , I cant figure out what I am doing wrong. I have also pasted my display down here can someone help me out, thanks in advance, I am still new to this utility.
    My questions are How do you direct this utility to point to the desktop or the TFTP folder
    does FE_PORT: Fast Ethernet 0 imply or point to Fa0/0 on my router
    My router is suppose to have 10.0.0.3 255.0.0.0
    Gateway of 10.0.0.1 255.0.0.0
    My TFTP Server 10.0.0.2 255.0.0.0
    How do I get the MAC address of the Router or the TFTP Server and which one  is required?
    my Ethernet port is 100Mb/Sec I cant tell whether it is full duplex or not so How do i set this FE_SPEED_MODE: Auto???
    =====================================================================================
    rommon 10 >
    rommon 10 > set
    PS1=rommon ! >
    FE_PORT=0
    WARM_REBOOT=
    RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
    BSI=0
    RET_2_RCALTS=
    RANDOM_NUM=1600357627
    ?=0
    IP_ADDRESS=10.0.0.3
    IP_SUBNET_MASK=255.0.0.0
    DEFAULT_GATEWAY=10.0.0.1
    TFTP_SERVER=10.0.0.2
    TFTP_FILE=
    rommon 11 > TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
    rommon 12 > TFTP_CHECKSUM=0
    rommon 13 > SET
    monitor: command "SET" not found
    rommon 14 > set
    PS1=rommon ! >
    FE_PORT=0
    WARM_REBOOT=
    RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
    BSI=0
    RET_2_RCALTS=
    RANDOM_NUM=1600357627
    IP_ADDRESS=10.0.0.3
    IP_SUBNET_MASK=255.0.0.0
    DEFAULT_GATEWAY=10.0.0.1
    TFTP_SERVER=10.0.0.2
    ?=0
    TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
    TFTP_CHECKSUM=0
    rommon 15 > tftpdnld
              IP_ADDRESS: 10.0.0.3
          IP_SUBNET_MASK: 255.0.0.0
         DEFAULT_GATEWAY: 10.0.0.1
             TFTP_SERVER: 10.0.0.2
               TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
            TFTP_VERBOSE: Progress
        TFTP_RETRY_COUNT: 18
            TFTP_TIMEOUT: 7200
           TFTP_CHECKSUM: No
            TFTP_MACADDR: 30:37:a6:49:35:a8
                 FE_PORT: Fast Ethernet 0
           FE_SPEED_MODE: Auto
    Invoke this command for disaster recovery only.
    WARNING: all existing data in all partitions on flash: will be lost!
    Do you wish to continue? y/n:  [n]:  y
    ARP: address resolution for 10.0.0.2 timed out.
    ARP failed with failure code 1.  TFTP transfer aborted.
    TFTP: Operation terminated prematurely.
    rommon 16 >       " not found
    rommon 17 >FE_SPEED_MODE=2
    variable name contains illegal (non-printable) characters
    rommon
    rommon 18 > set
    PS1=rommon ! >
    FE_PORT=0
    WARM_REBOOT=
    RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
    BSI=0
    RET_2_RCALTS=
    RANDOM_NUM=1600357627
    IP_ADDRESS=10.0.0.3
    IP_SUBNET_MASK=255.0.0.0
    DEFAULT_GATEWAY=10.0.0.1
    TFTP_SERVER=10.0.0.2
    TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
    TFTP_CHECKSUM=0
    ?=0
    rommon 19 > tftpdnld [ur]
    usage: tftpdnld [-hr]
      Use this command for disaster recovery only to recover an image via TFTP.
      Monitor variables are used to set up parameters for the transfer.
      (Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)
      "ctrl-c" or "break" stops the transfer before flash erase begins.
      The following variables are REQUIRED to be set for tftpdnld:
                IP_ADDRESS: The IP address for this unit
            IP_SUBNET_MASK: The subnet mask for this unit
           DEFAULT_GATEWAY: The default gateway for this unit
               TFTP_SERVER: The IP address of the server to fetch from
                 TFTP_FILE: The filename to fetch
      The following variables are OPTIONAL:
              TFTP_VERBOSE: Print setting. 0=quiet, 1=progress(default), 2=verbose
          TFTP_RETRY_COUNT: Retry count for ARP and TFTP (default=18)
              TFTP_TIMEOUT: Overall timeout of operation in seconds (default=7200)
             TFTP_CHECKSUM: Perform checksum test on image, 0=no, 1=yes (default=1)
              TFTP_MACADDR: The MAC address for this unit
                   FE_PORT: 0= (default), 1
             FE_SPEED_MODE: 0=10/hdx, 1=10/fdx, 2=100/hdx, 3=100/fdx,
                            5=Auto (default)
          TFTP_DESTINATION: The flash destination device for the file
                            flash:(default), usbflash0:, usbflash1:
      Command line options:
       -h: this help screen
       -r: do not write flash, load to DRAM only and launch image
    rommon 20 > tftpdnld
              IP_ADDRESS: 10.0.0.3
          IP_SUBNET_MASK: 255.0.0.0
         DEFAULT_GATEWAY: 10.0.0.1
             TFTP_SERVER: 10.0.0.2
               TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
            TFTP_VERBOSE: Progress
        TFTP_RETRY_COUNT: 18
            TFTP_TIMEOUT: 7200
           TFTP_CHECKSUM: No
            TFTP_MACADDR: 30:37:a6:49:35:a8
                 FE_PORT: Fast Ethernet 0
           FE_SPEED_MODE: Auto
    Invoke this command for disaster recovery only.
    WARNING: all existing data in all partitions on flash: will be lost!
    Do you wish to continue? y/n:  [n]:  y
    ARP: address resolution for 10.0.0.2 timed out.
    ARP failed with failure code 1.  TFTP transfer aborted.
    TFTP: Operation terminated prematurely.
    rommon 21 >

    What I notice in the original post is this error
    ARP: address resolution for 10.0.0.2 timed out.
    which says that the router is looking for the 10.0.0.2 server but not getting response to its arp request. Can the original poster clarify for us how the device that has the image file is connected to the router that has the problem? Also what kind of device is 10.0.0.2? Is it a PC running TFTP server software or is it something else?
    HTH
    Rick

Maybe you are looking for


HashFlare