I Have a Very BIG Problem

I'm trying to get one of my CS4 project to work in CS5 but one of the video files that I used is I guess not compatible with CS5. I reinstalled CS4 and tried opening it, but it had a start up error while initializing media core. I figured out that if I uninstall quick time then I can open it up. But the video file is a .mov with a png codec. What that means is that without Quicktime, After Effects can't decode it. I can't convert the video file because as far as I know the png codec in a .mov file is the only video file that as far as I know works with opacity and transparency. If you have a solution to one or many of these problems please leave a post down below.

I can't convert the video file because as far as I know the png codec in a .mov file is the only video file that as far as I know works with opacity and transparency.
Why not? What's stopping you to use a PNG, PSD, TGA or TIFF image sequence, all of which support Alpha/ transparency? that aside, CS5 handles QT files just fine, but it would seem that you have a permission or other problem that prevents the relevant service from being launched, so please provide some more details about your system and as a minor test, try to run as administrator.
Mylenium

Similar Messages

  • Hi,i have a very big problem....i had an accident with my macbook , i poured some champagne and it does not start anymore....it will work again???

    hi,i have a very big problem....i had an accident with my macbook , i poured some champagne and it does not start anymore....it will work again???

    If you spilled champagne on it, chances are not good.  If you haven't alredy DO NOT turn it on or charge it.  I would immediately take it to the Genius Bar and see if they can clean it up before. 
    Had the same problem with a 15" MBP and a tea spill and I did the opposite.  Trashed the Logic & Keyboard Assembly.  Cost to repair was going to be more than what I paid for a computer so ended up having to replace it.

  • I have a very big problem with my mac book pro. It continously looses the wifire connection. This happens every 5-10 minutes and is getting to be a very big irritation. I have tested my wifiresignal

    I have a very irritating problem with my MacBook Pro. It keeps loosing the wifi connection - every 5-1o minutes!!!
    I have testet the wifi signal and had my router checked - both are fine.
    Please tell me what I can do :-(
    John

    First you should check on another Wifi to see if it's your Lion machine.
    If it only occurs on your Wifi, then perhaps you have local interference and need to set the router on another channel far from others.
    You can install a free program called KisMAC that you set your Driver Preferences to Apple Airport Extreme Passive Mode, enter your Admin password and monitor your local Wifi signals, see if you cna pin point the cause of your interference or meddler.
    If your not running WPA2 with AES and a 12 plus random character/letter/number password for both Admin and Internet access use only then you should seriously consider doing so.
    http://www.tomshardware.com/reviews/wireless-security-hack,2981-10.html

  • I have a very big problem with my icloud acc

    On 9th of this month , i erase my another device from my "find my iphone " app , after ther i write on my phone the icloud acc  and when i want to press on that iphone's back-up , i can't find it , i must say that , on my another device , when i enter settings -> icloud -> storage -> manage storage , i can see that back-up and it have 8.9 gb .... what's the problem  ? i lost so many photos and i really want them back....

    Hi Leleli,
    I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are saying that you are having issues restoring your current iPhone from a previous iPhone's iCloud backup, you may find the information and steps outlined in the following articles helpful:
    iCloud: Restore or set up your iOS device from iCloud
    If you need help restoring an iCloud backup - Apple Support
    Regards,
    - Brenden

  • Hello,I have a very big problem in my the new ipad

    hello my problem is im my the new ipads touch// yesterday I was download one game in app store after 5min this touch was hanging and I cant do with this touch  and I hold this power and it go to lock/ to day I cant (slide to unlock) but this home botton and vol and sensors are ok  I dont have any problem but this touch is hang    what can I do????
    I am in iran...

    Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

  • I have a very big problem in my data recovery data recovery

    I made a backup through blackbery link
    I made booting device. I'm trying to restore the data to the device. I get an error "Your computer can not connect to the device, turn the device"
    When the power is turned on
    Please bring me a solution
    I have lots and lots of important data

    Hi..
    1. Open Control Panel and go to Device manager.
    2. Scroll down the network adapter section and you will see “Blackberry #3? or something similar like one for Blackberry Device and the other for Blackberry Virtual Private Network.
    3. No matter what the name was, double-click on the additional item named BlackBerryDevice with exclamation mark, go to Drivers tab and click Uninstall button.
    4. There is a Monitor with magnifying glass icon at the top right of Device Manger. CLick on it to scan for hardware Changes. Now re-plug your Z10 in back again.
    Thanks
    Please update the result after applied..
    Thanks

  • Just joined bt and have a real big problem!!!!

    hello there i was very happy untill this morning with my new bt infinity package which was installed last tuesday.i have only just realised with horror that i have taken delivery of the wrong tv box.we have chosen a humax youview box when we should have opted for a bt vision+ box so we could receive the extra 18 channels and sport.we ordered over the phone and i was told it was just a matter of paying a £10 fee to get espn and i didnt realise the extra channels i was paying an additional £12.50 for was the six packs add on which is completely different.anyway i rang up this morning and was told it would cost £199 to change boxes!!!!!!.is this correct??.if so ive got a year with a useless box with next to nothing i want to watch!!.what are my options please.
    on the plus side i am delighted with the phone and broadband!!

    jezstatham
    Visitor
    Posts: 3
    Registered: ‎14-04-2013
    Re: just joined bt and have a real big problem!!!!
    on ‎14-04-2013 22h57
    stuart can you give me a bit more info about the schedule for the humax box being enabled?
    It is scheduled for the summer but lime all schedules it could slip. It requires an update to the software
    They are currently working on delivering this service to those who have the existing boxes ie the Black Vision Box. The two separate platforms will disappear in time with YouView being the future. Have you checked to see if your exchange is multicast enabled
    Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Helpful Post?
    If a post has been helpful, say thanks by clicking the ratings star.

  • Very big problem with JSF about FORM and "id=" for HTML form's elements and

    I have discovered a very big problem with JSF about FORM and "id=" for HTML form's elements and java instruction "request.getParameterNames()".
    Suppose you have something like this, to render some datas form a Java Beans :
    <h:dataTable value="#{TablesDb2Bean.myDataDb2ListSelection}" var="current" border="2" width="50%" cellpadding="2" cellspacing="2" style="text-align: center">
    <h:column>
    <f:facet name="header">
    <h:outputText value="Name"/>
    </f:facet>
    <h:outputText id="nameTableDb2" value="#{current.db2_name_table}"/>
    </h:column>
    </h:dataTable>
    Everything works fine...
    Suppose you want to get the name/value pairs for id="nameTableDb2" and #{current.db2_name_table} to process them in a servlet. Here is the HTML generated :
    <td><span <span class="attribute-name">id=<span class="attribute-value">"j_id_jsp_1715189495_22:0:nameTableDb2">my-table-db2-xxxxx</span></td>
    You think you can use the java instructions :
    Enumeration NamesParam = request.getParameterNames();
    while (NomsParam.hasMoreElements()) {
    String NameParam = (String) NamesParam.nextElement();
    out.println("<h4>"++NameParam+ "+</h4>);
    YOU ARE WRONG : request.getParameterNames() wants the syntax *name="nameTableDb2" but JSF must use id="nameTableDb2" for "<h:outputText"... So, you can't process datas in a FORM generated with JSF in a Servlet ! Perhaps I have made an error, but really, I wonder which ?
    Edited by: ungars on Jul 18, 2010 12:43 AM
    Edited by: ungars on Jul 18, 2010 12:45 AM

    While I certainly appreciate ejb's helpful responses, this thread shows up a difference in perspective between how I read the forum and how others do. Author ejb is correct in advising you to stay inside JSF for form processing if form processing is what you want to do.
    However, I detect another aspect to this post which reminds me of something Marc Andreesen once said when he was trying to get Netscape off the ground: "there's no such thing as bad HTML."
    In this case, I interpret ungar's request as a new feature request. Can I phrase it like this?
    "Wouldn't it be nice if I could render my nice form with JSF but, in certain cases, when I REALLY know what I'm doing" just post out to a separate servlet? I know that in this case I'll be missing out on all the nice validation, conversion, l10n, i18n, ajax, portlet and other features provided by JSF".
    If this is the case, because it really misses the point of JSF, we don't allow it, but we do have an issue filed for it
    https://javaserverfaces-spec-public.dev.java.net/issues/show_bug.cgi?id=127
    If you can't wait for it to be fixed, you could decorate the FormRenderer to fix what you want.
    I have an example in my JSF book that shows how to do this decoration. http://bit.ly/edburnsjsf2
    Ed

  • Please, I am in a very big problem I designed the project by Adobe director And you test the software on the computers on Windows and works with high quality When I tested the project on Apple Macintosh operating system, Li appeared a number of problems

    Please, I am in a very big problem
    I designed the project by Adobe director
    And you test the software on the computers on Windows and works with high quality
    When I tested the project on Apple Macintosh operating system, Li appeared a number of problems and you dissolve a large part of them
    But I have a problem too big
    The project works on some devices and others show me messages mistakes and why chasm different operating system version
    Apple's Macintosh and these messages
    "biosegnatures" can't be opened becouse it 's from undefined developer "
    others
    shokwave player error
    pleas what can i do

    Welcome to the Support Communities.
    m.raslan wrote:
    I tested the project on Apple Macintosh operating system
    Click on the  menu at top left of your screen, choose About This Mac and, in the panel that appears, note the Version no. in the form 10.n.n. Then update your product list so we can see what version of OS X you're running on the Mac — see this tutorial:
    Update your product list
    m.raslan wrote:
    "biosegnatures" can't be opened becouse it 's from undefined developer "
    This Apple doc may help:
    OS X: About Gatekeeper
    m.raslan wrote:
    shokwave player error
    Is Shockwave Player installed?...
    http://www.adobe.com/shockwave/welcome/
    ...If not, get it here:
    http://get.adobe.com/shockwave/

  • I have a desktop K7-ll74PC. The Icons have gotten very big. how to reset.

    My icons have gotten very big and I have called support but to no avail. They are just reading from a manual and I am beside myself to find the right solution. I have reset the computer many times per the help desk. I am ready to return the computer and moniter.

    banditsmask wrote: My icons have gotten very big and I have called support but to no avail. They are just reading from a manual and I am beside myself to find the right solution. I have reset the computer many times per the help desk. I am ready to return the computer and moniter.
    Hello banditsmask, You might try resetting the screen resolution to a higher resolution.
    Right click on the desktop and select screen resolution and slide the slider tab to a resolution of your choosing.
    If the resolution is set to 800x600, the icons would be very large. Setting the resolution to a hgher setting will make everything on the screen look smaller.
    It appears the model number you listed is incorrect, since the HP support site could not locate a system with the model number you listed.
    Please click the White Kudos star on the left, to say thanks.
    Please mark Accept As Solution if it solves your problem.

  • Why does not Adobe flash player for iPad ,This is a very big problem

    Why does not Adobe flash player for iPad ,This is a very big problem ,I do not know why Apple is so Popular

    but Adobe is, in fact, continuing to update Flash for Android.
    Only essential bug and security fixes. No new feature updates have been released for 2 years.
    Of course we have those who wish fervently that the lack of Flash supprt will damage Apple severely and obsess about it all the time.
    I thought they'd realised it was a lost cause ages ago... they mostly seem to have disappeared from this forum, at least...

  • We have a very big issue here, Patch Tuesday didn't work correctly yesterday, and the patches took all the free drive space away.

    Hello
    We have a very big issue here, Patch Tuesday didn't work correctly yesterday, and the patches took all the free drive space away.
    Before we started with the Patches, we had one Gig of free space on our hard drive, now we are down to less than 10 Megs!!!
    What happened is that the patches didn't work, we had to try them 7 times, and every time they created a 'temporary restore point' which we don't know where that point is.
    The server has crashed twice since, we were able to place it back online but we're afraid it will crash again.
    We have several customers on that server, we are very worried,
    Can you please help us?
    Thank you

    Hi,
    Hope the below article be helpful:
    Clear space on your hard drive by deleting old Windows uninstall folders
    http://news.cnet.com/8301-13880_3-9862223-68.html
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    And as far as I know, we could not use diskpart to extend C drive, 3rd party utilities may work, please go through the below thread:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/03068ecb-7edd-43d8-bc68-12bc466c583f/how-to-extend-the-windows-2003-c-drive?forum=winservergen
    Regards,
    Yan Li
    Regards, Yan Li

  • G'day, my name is allysa and I'm only 13 y/. I have a really big problem to my iPod, my home button doesn't work so I can't go back to any application everytime I want, what should I do ? Please help me

    G'day My name is allysa and I'm only 13 year old, I have a really big problem at my iPod touch. I'm really worried about my iPod touch home button doesn't work I'm not sure why is it broken,I never drop it or put water on it. Please apple support community please help me. I bought my iPod touch 2 years ago.

    Hi,
    You can use the alternative called assistive touch to enable assistive touch go to settings>general>Accessibility>scroll down to the bottom of the page and enable assistive touch a white dot at the bottom right of your screen will appear press the white dot and you will see the home button
    Hope this helps
    N.B. book an appointment with an apple genius although they will charge you if you get your iPod fixed by their repair services due to your warranty expiring 

  • I have a very strange problem - A can listen on B, but B cannot listen on A

    Hello!
    I have a very disturbing problem.
    I have done a Paint-like program that add Point-objects on the JFrame. This porgram is networked and it contains a thread class that is sending the Point and a thread class that recieves Point objects. That makes it possible to open two instances of the program and when you paint on one of the windows, the program will send the point coordinats through a DatagramPacket to the other window. So, to make this clear, this program has ONE Sending class called Client and ONE Receiving class called Server. So when you want to make a connection, then you have to open two instances of the program.
    So what is the problem?
    Suppose that I have opened two instances of the program. Instance A is sending packets to port 2001 and is listening for packets on port 2000. Instance B is sending packets to port 2000 and is listening for packets on port 2001.
    When I draw a point on Instance A's window, the Instance B is receiving the point and draws the point on its window.
    When I draw a point on Instance B's window, the Instance A is NOT receiving the point. Instance B is listening on itself. That is the problem. Why is instance B listening for packets from itself and why doesn´t A get B's packets when B gets A's packets?
    Here is the send och receive classes (called Client and Server):
    class Client extends Thread
                Point p;
                Client(Point p)          
                     this.p = p;
                public void run()
                     System.out.println("Sending");
                     try
                          InetAddress toHost = InetAddress.getLocalHost();                     
                          int port = 2000;                    
                          DatagramSocket sock = new DatagramSocket();                                                   
                          String message = Integer.toString(p.x) + " " + Integer.toString(p.y);                         
                          byte[] data = message.getBytes();                    
                          DatagramPacket p = new DatagramPacket(data, data.length, toHost, port);     
                          sock.send(p);                                                                                
                     catch(SocketException se){}
                     catch(IOException ioe){}
                     catch(ConcurrentModificationException cme){}
    class Server extends Thread               
                String message;
                String[] xy;
                public void run()
                     System.out.println("Receiving");
                     try
                          byte[] data = new byte[8192];
                          DatagramPacket packet = new DatagramPacket(data, data.length);
                          DatagramSocket sock = new DatagramSocket(2001);
                          while(true)     
                               sock.receive(packet);                                                                                            
                               message = new String(packet.getData(), 0, packet.getLength());                                          
                               xy = message.split(" ");                                                                 
                               Point p = new Point(Integer.parseInt(xy[0]), Integer.parseInt(xy[1]));          
                               addPoint(p);                                                                                               
                     catch(SocketException se){}
                     catch(IOException ioe){}
                     catch(ConcurrentModificationException cme){}
      }I have tried to solve this for hours but I have not found any solution.
    Please, help!

    Here is an executable example.
    1. To run the first instance: Compile the code and run the application and note that it is listening on port 2000 and sending through port 2001
    2. To run the second instance: Change the ServerSocket to listen on port 2001 and the DatagramSocket to send through port 2000 and compile and run the application.
    3. Tell me this: Why does the first instance listen from DatagramPackets from itself and not from the other running instance while the other running instance is listening for DatagramPackets sent from the first instance? The one who can give me the answer will be the man of the month.
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import java.util.*;
    import java.lang.Thread;
    import java.net.*;
    import java.net.DatagramPacket;
    import java.io.*;
    public class Paint extends JFrame
         private Board b = new Board();
         public static void main(String[] args)
              new Paint();
           public Paint()
              setDefaultCloseOperation(EXIT_ON_CLOSE);
              getContentPane().add(b, BorderLayout.CENTER);
              addKeyListener(new ChangeSizeListener());
              setSize(300, 300);
              setVisible(true);
              setFocusable(true);
           class ChangeSizeListener extends KeyAdapter
              Board b = new Board();
              public void keyPressed(KeyEvent e)
                   if(KeyEvent.getKeyText(e.getKeyCode()).equalsIgnoreCase("s"))
                        try
                               int size = Integer.parseInt(JOptionPane.showInputDialog(null, "New size:", "Size", 3));
                               b.setSize(size);
                        }catch(NumberFormatException nfe){}
    class Board extends JPanel
         Point p;
           private HashSet hs = new HashSet();
           int size_x;
           int size_y;
              public Board()
                   size_x = 20;
                   size_y = 20;
                   setFocusable(true);
                   setBackground(Color.white);
                   addMouseListener(new L1());
                   addMouseMotionListener(new L2());
                   Server s = new Server();
                   s.start();
              public void paintComponent(Graphics g)
                   super.paintComponent(g);
                   g.setColor(Color.black);
                   Iterator i = hs.iterator();
                   while(i.hasNext())
                     p = (Point)i.next();
                     g.fillOval(p.x, p.y, size_x, size_y);
             private void addPoint(Point p)
                   hs.add(p);
                   repaint();
             public void setSize(int size)
                    this.size_x = size;
                    this.size_y = size;
                    repaint();
           class L1 extends MouseAdapter
                public void mousePressed(MouseEvent me)
                    Client c = new Client(me.getPoint());
                     addPoint(me.getPoint());
                      c.start();
           class L2 extends MouseMotionAdapter
                public void mouseDragged(MouseEvent me)
                     Client c = new Client(me.getPoint());
                      addPoint(me.getPoint());
                      c.start();
           class Client extends Thread
                Point p;
                Client(Point p)
                     this.p = p;
                public void run()
                     System.out.println("Sending");
                     try
                          InetAddress toHost = InetAddress.getLocalHost();
                          int port = 2000;                 // After running a first instance of the application, change the port to listen on 2001
                          DatagramSocket sock = new DatagramSocket();
                          String message = Integer.toString(p.x) + " " + Integer.toString(p.y);
                          byte[] data = message.getBytes();
                          DatagramPacket p = new DatagramPacket(data, data.length, toHost, port);
                          sock.send(p);
                     catch(SocketException se){}
                     catch(IOException ioe){}
                     catch(ConcurrentModificationException cme){}
           class Server extends Thread
                String message;
                String[] xy;
                public void run()
                     System.out.println("Receiving");
                     try
                          byte[] data = new byte[8192];
                          DatagramPacket packet = new DatagramPacket(data, data.length);
                          DatagramSocket sock = new DatagramSocket(2001);              // After running a first instance of the application, change the DatagramSocket to listen on port 2000
                          while(true)
                             sock.receive(packet);
                             message = new String(packet.getData(), 0, packet.getLength());
                             xy = message.split(" ");
                             Point p = new Point(Integer.parseInt(xy[0]), Integer.parseInt(xy[1]));
                             addPoint(p);
                     catch(SocketException se){}
                     catch(IOException ioe){}
                     catch(ConcurrentModificationException cme){}
    }

  • I tell her that I'm developing a flash content with as2 and I have a very simple problem, I hope you

    Hello, how are you?
    I tell her that I'm developing a flash content with as2 and I have a very simple problem, I hope you can help me
    I happened to create a movie clip and inside to create a scroll that is two isntancias,
    I mean:
    in the first frame create a button in the 6 to 5 buttons and an action to melleve the sixth frame and another to return. (Elemental truth)
    Now I have a problem. In creating a movie clip instance name to each button and in the average place the next fram as2,
    boton.onRollOver name = function () {
           gotoAndStop ("Scene 1", "eqtiqueta");
    because what I want is that from inside the movie clip, go to the scene proncipal to a frame that is three in the label name.
    however, does not work.
    appreciate your cooperation.
    Escuchar
    Leer fonéticamente
    Diccionario - Ver diccionario detallado

    Hello, I think you need to start a discussion on the Action Script forum. This is the Flash Player forum, the browser plugin.
    Thanks,
    eidnolb

Maybe you are looking for

  • Table aliases while creating views in KM

    Hello All, While executing an interface I noticed that it failed on the LKM step - Create View on Source (LKM MSQL to MSQL) On investigation, I found the error was because of an in invalid alias (alias created was a sql server keyword) that ODI had a

  • Please help with adobe reader

    hello, hopefully i have post the correct forum. all my computer file even ie/firefox or chrome, when i try to open all file open with adobe, but can't not even open, so i need to uninstall the adobe reader 10 and everything goes to normal. but i need

  • Can't install any extensions

    Has anyone had this problem? I try to install an extension (any extension) and I get the following error pop up: EXTENSION MANAGER Can't find installer file ...............then here it lists where my extension is located. I have Dreamweaver CS3 for t

  • HDV Distorted on the web

    I am working through my first time using my XHA1 Canon and HDV. I had a problem with my exported file looking elongated and squeezed. I was exporting the FCP file with QuickTime using the HD 1080ip24 setting. That gave me a distorted movie. Next I ex

  • Airport not recognized

    I just put in an airport card in my clamshell. Computer won't recognize card, it does not come up as a configuration option and says "power off" . Card itself seems fine and works on wife's computer. Wife's card worked fine on my clamshell but no lon