I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

Hi,
first, sorry if my english sucks jajaa i speach spanish, havent practice my english for a while.
first i edited my video in premier cc
sequence 1280X720, 59,94 fps
48000hz - stereo
the i linked it with dynamik link to after, make some color correction, etc etc etc
i renderd in quicktime animation
my video looks fine in my computer, but when i send my .mov video to encore (cs6) in a HD MENU and standard menú, the image sucks.
i have done the transcoding in encore, but i doesnt work either. i dont know what else to do.

Similar Messages

Need urgent help. I have been trying to resolve this problem to no avail. I am able to preview my sp

Need urgent help. I have been trying to resolve this problem to no avail. I am able to preview my sprymenu on my local browsers opera, google crome, and IE but when it is uploaded, the sprymenu squashes to the left hand side.

Please get your checkbook ready. (Only kidding.)
Have you ever done a hard factory reset of your Airport Express base? If not, then try it. Push down the reset button with a pen, then keep it depressed as you plug AX into the wall and keep holding it down until the green light blinks 4 times and then turns amber. Then let go. Unplug your broadband modem for a couple of minutes and shut down your Mac. First restart the modem, then the Mac. Use Airport Setup Assistant to set up a new network from scratch.
In System Prefs > Network > Show > Network Port Configurations drop n drag Airport to the top of the list and deselect all port configurations that you do not use.
That's a start.

Need Urgent help, I have made partition hard drive in my mac book and using OS mac

Need Urgent help, I have made partition hard drive in my mac book and using OS mac & Window8 seperately... for couple of days it works great for both window & OS mac But nowadays, my pc gets restart automatically while using window & even I cant access to my Mac OS........... I got some error in window (error80070003) ...>>>>> Now how can I format whole drive & recover my Mac book OS.without boot disk.

I can't find that model. If you open System Profiler in the Utilities folder look for the Model Identifier over in the right hand display. What do you find for the model ID? If your computer supports Internet Recovery here's what to do:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer. If Mavericks is not installed, then you can reinstall it by re-downloading the Mavericks installer.
You will need to use Boot Camp Assistant in order to create a new Windows partition, then reinstall Windows.

I have Mac mini and there is partition of boot camp but some miss understanding the osx 10.8.2 is deleted and while I m going to recovery mode the portition can not removing and the also cant repaired what I do I need urgent help ???? Please ?????

I have Mac mini and there is partition of boot camp but some miss understanding the osx 10.8.2 is deleted and while I m going to recovery mode the portition can not removing and the also cant repaired what I do I need urgent help ???? Please ?????

Do you have a Time Machine backup or clone? If not,
all is lost if you have in fact deleted your OSX partition
and you will have to do a reinstall from Recovery HD
and install all else.

BW error. Need urgent Help( I will give out full points).

We have BW version 3.1 and content 3.3.
We are doing loads to ODS and getting oracle partition error. It gives Oracle partition error ORA-14400. inserted partition key doesn't map to any parititon.
The exception must either be prevented, caught within the procedure
"INSERT_ODS"
(FORM)", or declared in the procedure's RAISING clause.
o prevent the exception, note the following:
atabase error text........: "ORA-14400: inserted partition key does not map to
any partition"
nternal call code.........: "[RSQL/INSR//BIC/B0000401000 ]"
lease check the entries in the system log (Transaction SM21).
ou may able to find an interim solution to the problem
n the SAP note system. If you have access to the note system yourself,
se the following search criteria:
The termination occurred in the ABAP program "GP3WRFMGVS1D8IW16LLGSL4QQKH " in
"INSERT_ODS".
he main program was "SAPMSSY1 ".
he termination occurred in line 41 of the source code of the (Include)
program "GP3WRFMGVS1D8IW16LLGSL4QQKH "
f the source code of program "GP3WRFMGVS1D8IW16LLGSL4QQKH " (when calling the
editor 410).
rocessing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
rocedure "INSERT_ODS" "(FORM)" but was not handled locally, not declared in
the
AISING clause of the procedure.
he procedure is in the program "GP3WRFMGVS1D8IW16LLGSL4QQKH ". Its source code
starts in line 21
f the (Include) program "GP3WRFMGVS1D8IW16LLGSL4QQKH ".
Please help me guys. I will award points for good answers.

Dear Sir,
Now I have got the problem like yours (load to ODS and ORACLE partition error ORA-14400 with INSERT_ODS). Tell me, please - did you solve this problem?
Can you recommend me something? What did you do with partitions?
Help me, please - I need urgent help too.
GLEB ([email protected])
P.S. Sorry for my English, I havent got any language practice for a long time.

Need urgent help!!!! (combine prompt and formula)

Hi,
I am using Oracle Business Intelligence 10.1.3.3.2, and creating some reports from answers. I desperately need to combine
prompt and formula on some column.
I need to use prompt in my formula on some column.
Need urgent help !

You can use the presentation variables to pass the value of the prompt into the report or any column formula.
In the dashboard prompt you see an option called "Set Variable" where and you need to give a name to the variable.(Say Var_value)
Now the value of the variable can be simply referenced using the syntax @{var_name}{10}. Here '10' being the defualt value which is optional you can simply reference using @{var_name} and you have the value of the prompts passed.
Hope it works
Thanks
Prash

I need urgent help to remove unwanted adware from my iMac. Help!

I need urgent help to remove unwanted adware from my iMac. I have somehow got green underline in text ads, pop up ads that come in from the sides of the screen and ads that pop up selling similar products all over the page wherever I go. Its getting worse and I have researched and researched to no avail. I am really hestitant to download any software to remove whatever it is that is causing this problem. I have removed and reinstalled chrome. I have cleared Chrome and Safari cookies. Checked extensions, there are none to remove. I need to find an answer on how to get rid of these ads. Help please!

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/Application Support/VSearch
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchAgents/com.vsearch.agent.plist
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. It must be said that this failure of oversight is inexcusable and has seriously compromised the value of Gatekeeper and the Developer ID program. You cannot rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Need urgent help with HSDIO hardware timing

Hi everyone,
I need urgent help regarding HSDIO hardware timing. I've been working in a project which generating serial ramp using HSDIO pxie device.
I'm using clock rate 40MHz and generating 14 bit of boolean for each step of ramp. And I have to generate simply 256 steps ramp.
Which means, 256 (steps) x 14 (boolean array) x 25 ns (period of 1 boolean value) = 89,6 ns.
What I'm doing right now is with using index of FOR loop as my input data (converting the index into 14bit boolean), then write into pxie device in every iteration,
which means, my data is getting into output in every 1ms time, right? (I'm using windows)
And I want to be able to generate faster than that.
How can I prewrite my 256 steps ramp, then write them all at once into pxie device. I'm really stuck here.
In the picture can you see how I do the write into device in every iteration of FOR Loop.
Regards,
Yan.

hi, thanks for responding.
with using example of dynamic generation with script, I can manage to generate the ramp with controllable delay (generate the whole waveform, including delay with script command, then write to the card).
But I still have 1 question, I can test the output of the generation using oscilloscope and cant see the start delay (I'm writing delay at the start, before generating the ramp). My signal generated at 0 sec.
How can I check this start delay? is there any good example delivered with Labview to check this generation? Somehow I cant use the "dynamic generation and acquisition" example to see my generation (cant figure out how to capture the generated signal).
regards,
Yan.

Need to do a remote wipe of my iphone - stolen 24 hrs ago and . Need urgent help on this. Thanks - Pinaki

Need to do a remote wipe of my iphone - stolen 24 hrs ago Need urgent help on this. Thanks - Pinaki
< Personal Information Edited By Host >

Follow the steps in this article:
iCloud: Erase your device
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud), then click Find My iPhone.If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.If you don’t see Find My iPhone on iCloud.com, your account just has access to iCloud web-only features. To gain access to other iCloud features, set up iCloud on your iOS device or Mac.
Click All Devices, then select the device you want to erase.If you have Family Sharing set up, your family members’ devices appear below their names.
In the device’s Info window, click Erase [device].
To erase:
An iOS device: Enter your Apple ID password. If the device you’re erasing has iOS 7 or later, enter a phone number and message. The number and message will be displayed on the screen after the device is erased.

Need urgent help on J2ME Bluetooth.

Hi all,
I really need help about run example code of j2me bluetooth.
I'm doing a MSc project about bluetooth for delivery system, I just want to use bluetooth to send an object to PDA.
I,ve tried example on "Bluetooth for Java" with Atinav library but, it couldn't work.
Do you have an example code that can run on NetBeans 5.0 with
- AvetanaBluetooth Library (purchased)
or
- normal Bluetooth.java library
I need some examples for develop on it. and also please advice me on how to run and test the programs. I really need urgent help Please help me. my email is [email protected] or [email protected]

Hi Hari,
I think that the logic needs to be build up in the DISP part of the Search help exit.
What you can do is also get the Plant in the search help as an export parameter.
Then in the Return Tab you can check if the plant = 'AA', delete the data.
e.g.
      LOOP AT record_tab.
        IF RECORD_TAB-STRING+22(2) = '90'.
          DELETE record_tab INDEX sy-tabix.
        ENDIF.
      ENDLOOP.
Hope this helps.
Regards,
Himanshu
Message was edited by:
        Himanshu Aggarwal

Need Urgent Help in PM8M-V H problem - keyboard freeze

Hi everyone,
I'm a newbie in this forum and I really need urgent help with my motherboard.
My PC specification:
Intel Pentium 4 2.4GHz
MSI PM8M-V H W7104VMS v3.4 022206 14:32:17
1GB(512MB x 2) Kingston PC3200 400MHz
Seagate SATA II 320GB ST3320620SV (set with jumper to support SATA I)
Power Color ATI Radeon 9550 256MB
Lite-On DVDRW SHM-165P6S
USB mouse, PS/2 Keyboard
I really appreciate if anyone can help to guide me in solving my problem. My keyboard tends to freeze at the part where it says "Press any key to boot from CD". This limits me to do anything until I'm totally loaded into Windows. Thus, disable me to perform any formating and fresh installation of OS. However, the keyboards works fine at the begining of the POST and in BIOS. Is there any settings in BIOS that i should perform?.....
However, I realise in order to get through the foresaid message without the the keyboard freeze up is by keep on trying to boot up and shut down until it works (but only work once, then hv to try again), but this is not a solution as if what if I wanted to have 2 OS?... I cant use the keyboard to choose either of the OS installed. I have tried to change the RAM, change keyboard, use the build in VGA, or even remove the motherboard from the ATX casing - result: still have the same problem. What should I do??.. I have look around the forum for answers but there isnt any (I hope I didnt miss any). Is there any problem with my motherboard, or its BIOS, or any of the harware compatibility or etc..... what actually can I do?
I do not dare to perform any BIOS update Unnecessary (it seems that many have problems with BIOS problem in this forum) and moreover i think my BIOS is the most up-to-date. I cant find any new version in the net. Anyway I will check this topic frequently as possible to hope for any solution. What is the best solutions?
Thanks.

But the thing that makes me wonder is, my BIOS version is the latest but why this type of problem occurs??
What version of BIOS should I use?? Any recommendation ??
Thanks.

Need urgent help in listing out checklist from DBA prespective for BI Implementation Project

Hello Guys,
We are in Designing phase Data Modeling of PDW/APS Implementation Project.
I need urgent help in making a checklist from a DBA perspective.
Like what are things ill be needing at a time of implementation/Deployment.
Your expert comments and help will be highly appreciated.
Thank you,
Anish.S
Asandeen

You can get good summary of checklist from this article about
DBA checklist for data warehousing.
Which highlights on below pointers:
New system or old. (I.e. Up-gradation vs starting from scratch)
Complexity of SQL Server architecture
SQL Server storage
Determining SQL Server processing power
SQL Server installation consideration
SQL Server configuration parameter
SQL Server security
SQL Server Database property
SQL Server jobs and automation
Protecting SQL Server data
SQL Server health monitoring and check ups
SQL Server ownership and control
based on my real time experience, I will suggest you to keep an eye on
Load performance (It will be useful when your database(Warehouse) will have huge amount of data)
System availability (Check for Windows update and up time configuration)
Deployment methodology should be planned in advance. Development of packages and respective objects should be done systematically.
Source control mechanism
Disk space and memory usage
You might or might not have full rights on production environment, so be prepared to analyze production environment via Select statements [I guess you got my point]
Proper implementation of Landing , Staging and Mart tables.
Column size (this can drastically decrease your database size)
Usage of indexes (Index are good, but at what cost?)
I hope this will assist you in building your check list.

I am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help

i am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help from your side.

Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
You generally have to reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse.

Switch until release using keyboard...need urgent help

Hi,
i have a problem of configuring "switch until release" action using keyboard....
or is it there no this function at all...
it seems like all i can do is press to ON and press again to OFF
anyone can help...
need Urgent help....
thank you in advance..

This isn't possible because of the way operating systems
handle keyboard events. When you press a keyboard key, it does not register as
one key down. For whatever your operating system is set for as far as repeating
characters, it will register that many key down presses. The mouse works
differently, when you press the mouse it keeps that event "locked"
until you release the mouse. Because of this, you can not make a switch until
release using the keyboard; this definition is only for mouse clicks.
Brandon Vasquez | Software Engineer | Integration Services | National Instruments

Need Urgent Help: Solaris fails to come up after applying patch 120012-14

Hello All,
I really need urgent help , as I am in really big problem. Today I applied patches , the last patch I applied was 120012-14.
After this I rebooted Solaris and it is not coming up now. It is giving me following error, it reboots again and again
nel/misc/sparcv9/hook: undefined symbol 'netstack_unregister'
WARNING: mod_load: cannot load module 'hook'
/kernel/misc/sparcv9/hook: undefined symbol 'netstack_register'
/kernel/misc/sparcv9/hook: undefined symbol 'netstack_unregister'
WARNING: mod_load: cannot load module 'hook'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_register'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_event_remove'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_register'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_unregister'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_family_add'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_family_remove'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_unregister'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_find_by_stackid'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_event_add'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_rele'
WARNING: mod_load: cannot load module 'neti'
WARNING: neti: unable to resolve dependency, module 'misc/hook' not found
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_event'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_register'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip_config'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_impl'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_delete_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip'
/kernel/drv/sparcv9/ip: undefined symbol 'hook_run'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_cred'
/kernel/drv/sparcv9/ip: undefined symbol 'netstackid_to_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_event'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_family'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_create_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_stackid'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_rele'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_hold'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_family'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_init'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_fini'
WARNING: mod_load: cannot load module 'ip'
WARNING: neti: unable to resolve dependency, module 'misc/hook' not found
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_event'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_register'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip_config'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_impl'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_delete_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip'
/kernel/drv/sparcv9/ip: undefined symbol 'hook_run'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_cred'
/kernel/drv/sparcv9/ip: undefined symbol 'netstackid_to_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_event'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_family'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_create_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_stackid'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_rele'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_hold'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_family'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_init'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_fini'
WARNING: mod_load: cannot load module 'ip'
WARNING: ip: unable to resolve dependency, module 'misc/hook' not found
strplumb: can't install module drv/ip, err -1
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'cons_tem_disable'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_inverses'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'consmode'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_hide_cursor'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_pos'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_term_font_size'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_size'
WARNING: mod_load: cannot load module 'consconfig_dacf'
/kernel/misc/sparcv9/consconfig: undefined symbol 'dynamic_console_config'
WARNING: mod_load: cannot load module 'consconfig'
WARNING: consconfig: unable to resolve dependency, module 'dacf/consconfig_dacf' not found
panic[cpu3]/thread=180e000: mod_hold_stub: Couldn't load stub module misc/consconfig
000000000180b890 genunix:mod_hold_stub+1f0 (0, 185fc00, 18acbf8, 60002cff370, 1817328, 0)
%l0-3: 0000000001843b18 0000060003308000 0000000001811ce8 0000000000000000
%l4-7: 0000000000000000 0000000000000064 ffffffffffffffff 0000000000000000
000000000180b940 unix:stubs_common_code+30 (1f037ce7fb0, e164, 64000000, 0, 1ef800, 0)
%l0-3: 000000000180b209 000000000180b2e1 000000337e000000 0000000000000001
%l4-7: 0000000000000000 0000000001817338 0000000000000000 0000060002ccf6c0
000000000180ba10 genunix:main+134 (18ad050, 18a8c00, 1836500, 1861800, 183b400, 1814000)
%l0-3: 0000000070002000 0000000000000001 0000000000000000 0000000000000002
%l4-7: 00000000018b0280 00000000018b0000 00000000018ad060 00000000018ad000
syncing file systems... done
skipping system dump - no dump device configured
rebooting...
Please help me what should I do. I have gone through all forums and mailing lists but couldnt find pin point solution.
Thanks,
Farhan
Edited by: rozzx on Jul 5, 2008 1:48 AM

Solve this. Patch just screwed the meta devices, changed vfstab in single user mod and it booted fine.

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

Similar Messages

Maybe you are looking for