I have a website for my artwork. I had a PC and. Now an iMAC. I've used Dreamweaver to update the website. I used to go to Filezilla on the PC a upload the updated pages which would then show updated on the internet. What file like FileZilla should I
I have a website for my artwork. I had a PC and. Now an iMAC. I've used Dreamweaver to update the website. I used to go to Filezilla on the PC a upload the updated pages which would then show updated on the internet. What file like FileZilla should I use?
You can download it here:
https://filezilla-project.org/download.php?show_all=1
Click the Source Forge link - make sure you reject offers for any other software during the installation, Source Forge usually will ask you to install other stuff in addition to what you want (Filezilla).
It works well on Mac.
Dreamweaver also has built-in FTP functionality if you want to check that out.
Similar Messages
-
Hi I've topped up my phone and now I can't text anyone or get on the Internet
hi I've topped up my phone and now I can't text anyone or get on the Internet at all can someone help me please
Maybe try one of the WiFi transfer Apps? There are several to choose from. I use Photosynch quite often to send photos and videos between my computer(s), my iPhone, and iPad.
-
I have a new computer an Dell Inetel Celeron 2020 with Windows 8. I had interent connection on my old desktop and to my Iphone and Ipad, however now I cannot get my Ipad to connect to the internet whatsoever. i have messed with this since Wednesday of last week and I am exhausted from it. Please help.
So just the ipad cannot connect to the network? Does it connect to any other network?
Try this:
Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
Go to settings, turn wifi off. Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
Go to settings/genreral/reset/reset network settings. Then try to connect to network.
If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
If problem persists, then check for firmware updates on your router.(you check router manufacturer suppot website for downloads and instructions).
Wifi Settings greyed out or dim
http://support.apple.com/kb/TS1559
Recommended wifi settings
http://support.apple.com/kb/HT4199 -
I downloaded ios7 to my iphone and now my volume control does not work 99% of the time. Is there something I need to do to correct this?
Adjust the Volume Control in Control Center, or try a RESET.............
-
I messed with basically everything in the Display Settings and Phone Settings, trying to get it back to the same display I had on my old phone. But now it won't do anything?
I literally just bought it and activated it within the last 30 minutes. If someone has an idea as to what I did, that would be great. Thanks so much in advanced.Let's get your phone back to work as intended pronto cowsbark! Please contact our prepaid customer service team at 888-294-6804.
AntonioC_VZW
Follow us on Twitter at www.twitter.com/VZWSupport -
Ipod touch shut down and now wont turn on, not even when plugged to the computer
ipod touch shut down and now wont turn on, not even when plugged to the computer what can i do
If you get an network timed out error, try disabling the security software on your computer.
-
I have an older I Mac operating system 10.6.8 and want to upgrade. I've been told that the only upgrade available for my machine is 10.7.5. On what website can I find this upgrade or how do I find this upgrade on the Apple website?
Choose About this Mac from the Apple menu, check if the computer has at least a Xeon or Core 2 Duo(not Core Duo) CPU and 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(116475) -
I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try. -
I have had a ipod touch for a few years( 4th generation) and now withing 10 minutes of use it heats up very warm and only holds it's charge for about a hour if im lucky any help?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
i connect my iphone to my pc and i tunes open automatically,then i press dowload and update but itunes say am not connected to the internet while my pc is connected to the internet what isi the problem?
If you are the only user on your computer you probably don't have multiple user accounts set up and can disregard that. If you are using iTunes 11 go to View>Show Sidebar. Now see if your iPad appears under Devices on the left side when you connect it. If it does, click on the name of your iPad on the left side and your iTunes sync settings options will appear in folders with tabbed headings to the right.
If it doesn't appear on the left side, follow the troubleshooting steps shown in this article: http://support.apple.com/kb/TS1538. -
I had an unauthorized purchase on my old apple ID so I created a new one since the old one had been deactivated and now I cannot update any of my apps, I have read that the apps will be tied to the old account but since the old one was deactivated I cant update them and I do not want to delete/lose their data, re download, and start all over again. Is there anyway to go around this issue?
thanksAsk Apple to re-enable it. I had an unauthorized purchase last October. They disabled my account until the problem was solved. However, I asked them to reopen it, and they just asked me to provide some security information (billing address, a recent purchase you made, etc.), and then they re-enabled it.
-
I clicked the button in my setting thatz is saying "software update iOS 6.1.2. It turned off and now My iPad 2 is stuck on a black screen that has the iTunes symbol and a charger that I'm guessing means "plug into iTunes". I did so and then waited four hours to download something. And now it is saying that its going to update my iPad but it isn't working. I tried to "update" twice. I am VERY ANNOYED beczuse the last time i updated it, it just turned off and i didnt have ot plug it in or anything. WHY IS IT DOING THIS.....?????? My ipad will not turn on or anything. Help me FIX THIS!!!
hi Kinney. last hour, i update my ipad 2, then im having the same problems as u. im also hoping people can solve this issue.
-
I have used SAP doc mgmt for years. We copied a client and now when I configure a Class to my DMS DIR and go to CV01n Additional Data NONE of the characteristic entry boxes show up. Additional Data is blank.
It appears there must be some high level setting missing in the client. I have checked all authorizations and cannot find a difference between this client and all of the other clients we have. Only this one client does not show the class characteristics in the Additional Data tab.
Any ideas of why this standard function is not working). It does not matter which DIR I config the 017 class to, nothing shows on Additional Data.Hi,
The issue is resolved. We are working in a sandbox with Class configuration on a DMS issue related to standard class 017. There are no standard settings in SPRO - Cross-Application Components | Maintain Object Types and Class Types | for the object type DRAW that will allow "auto-populating" characteristic values as we do with VC class 300.
For whatever reason DRAW and class 017 are not configured by SAP in the same manner as class 300 for example.
We made a config entry for DRAW Class 017 VBAP. Let's just say the system did not like that.
We are exploring other options. -
I have to constantly keep restarting my computer for it to connect to the internet, what can be done to correct this problem?
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use. -
yahoo is my home page. I updated to the new version of firefox per yahoo and now my tool bar has changed.
I want the old tool bar back? The old one had an X when I wanted to stop something (I just clicked on the X). Also, the old toolbar has a "home" that I clicked on and it went staight back to yahoo main pageNot sure whether for instance you initially had a Yahoo optimised version of Firefox, and have now overwritten it with an official Mozilla version. Although the Mozilla version should NOT add unwanted features, but the Yahoo version may well do.
If you merely need to find the Yahoo emails page quickly just add it as a bookmark or as a bookmark on the Bookmarks toolbar and make sure that is visible.
Clicking the star icon on the location bar whilst looking at your emails will bookmark the page.
* [[How to use bookmarks to save and organize your favorite websites]]
* [[Bookmarks Toolbar - Display your favorite websites at the top of the Firefox window]]
I do not use Yahoo myself,and am not sure what add-ons are available. You could search yourself using
* FirefoxButton -> add-ons
** see [[Find and install add-ons to add features to Firefox]]
** examples [https://addons.mozilla.org/en-us/firefox/addon/yahoo-toolbar/ yahoo toolbar] & [https://addons.mozilla.org/en-us/firefox/addon/yahoo-mail-notifier/ mail notifier]
* also look at Yahoo's own information such as http://help.yahoo.com/tutorials/toolbar/cl3/c3_ff_toolbar1.html
Maybe you are looking for
-
i'm trying to hook up my apple tv to my dircet tv box has anybody done this before
-
Making White Balance, Sharpen, ect. part of the default HUD
Greetings, I would like to add the sharpen, white balance, color correction and others set to be a part of the default HUD. I found this post here: http://discussions.apple.com/thread.jspa?threadID=674833&tstart=0 but it does not seem to work for ver
-
C3-01 screen smooth scrolling?
any tips on how to get the screen to scroll smoothly? When I first got this I was told by several people it just takes time to get used to a touch screen & soon I would love it! Well had it a year now & I still cant get it to scroll smoothly especia
-
Connecting 2 Clients via Server
Hi, I asked a question about this a while ago, and got some helpful answers, but I just can't seem to get my head 'round the idea. I have 2 clients, and I want them each to connect to the server, and for the server to pair them up, and pass them off
-
I downloaded some games from Itunes and I can't find them to play...help???