I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart the computer to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I ended up putting it in DFU mode.  It's kinda hard to tell it was in DFU mode because nothing showed on the screen, it was just black, but the sounds from the computer helped to tell me it was connected.
Itunes still didn't recognize the device for whatever reason.
So I used redsn0w.  I don't know if I can say that on these forums, but considering itunes was worthless at this point I am going to give credit where credit is due.
Now I am giving itunes a second chance to upgrade to 5.1, if it doesn't work, well, back to redsnow and maybe I will even jailbreak it this time rather than just using the fecovery fix found under extras.

Similar Messages

  • Snow Leopard 10.6.3 upgrade issues..  I run the full install and my computer restarts to complete the installation, but when it restarts the software has not upgraded.  Any suggestions?

    I've tried to upgrade to Snow Leopard 10.6.3.  I run the full install and my computer restarts to complete the installation, but when it restarts the software has not upgraded.  Any suggestions?

    Are you booting from the retail disc to do the installation, or running it while booted from Macintosh HD?
    It should work either way, but it doesn't always work when booted from Macintosh HD. The system files are supposed to be moved into place during the restart (while the HD is unmounted) making for a long restart time which sometimes causes people to think somethings wrong and abort it. Which is a bad move.
    If you're booting from the retail disc it's less obvious what the problem may be; however if you've tried it from booted from the HD and it's failed, then tried booting from the disc, it will fail again because the system components are already on the HD in a disc image waiting to be moved into place.
    Whichever way you were tryig, I'd try downloading OmnDiskSweeper (it's free)  and using it to see if there's a large package (around 7-10 GB) lurking somewhere that may contain the installer files. If you do, you'll need to trash that before the installer will see a 'clean' system again.
    It's also worth asking how much free space you have on your HD - if there's not enough for the installer to use for the temporary package or dmg, it'll fail.
    Was there no warning dialogue after the unsuccessful install?
    Message was edited by: noondaywitch ; link added

  • Installing problem on Windows 2003 Server 64 bit

    Dear All,
    I'am trying to install XE onto a Windows 2003 Server 64 bit.. The installation process ends without any errors but the database itself seems not to start.
    I tried several hints that have been mentioned here within the forum. But none of them worked. While experimenting I saw that there is not a single registry entry of Oracle within HKEY_LOCAL_MASCHINE\Software .
    Is there a possiblity to set those needed registry entries manually? Is there a script for that purpose?
    Thank you very much for your help!
    Regards
    Matthias

    Hi,
    thank you for your reply. As 32bit programs should run under Windows 64bit I thought the XE should run under 64bit, too.
    The installation of XE itself seems to finish without any errors. But within the log files it can be read that the database has not started up due to a out of memory problem. This causes many log entries within all other logfiles as no database could be created.
    The out of memory problem might be the same as within Advice on running XE on a small virtual Linux host ("Virtuozzo") because I am using a virtual windows 2003 server with "Virtuozzo", too.
    At this time I am on discussing the issue with the provider. Maybe I will get a dedicated server with Windows Server 2003 64bit. Hopefully the XE could be installed on the 64bit Windows Server because 32bit dedicated servers are rare.
    Best regards
    Matthias

  • Oracle 9i 32 bit ON Windows 2003 server 32 bit

    Hi all
    I have oracle 9i 32 bit istalled on HP server with windows 2003 server 32 bit, 8GB ram.
    I am trying to increase oracle memory size (SGA + PGA),
    but when I exceed 2GB for (SGA + PGA) it gives me error (ORA-27102 : out of memory)
    Is it because the windows 32bit ?
    How to manage this issue?

    The maximum amount of memory that can be allocated on a Windows Server 2003 is 4 Gb.
    If you have Windows Server 2003 Enterprise Edition, it supports 32 GB of physical RAM and Windows Server 2003 Datacenter Edition supports 64 Gb by means of the Physical Address Extensions (PAE) feature.
    You should declare the 3 Gb switch that is in the Boot.ini file with Microsoft Windows Server 2003 so it addresses more than 2Gb. So verify which windows 2003 server edition are you currently using.
    ~ Madrid
    http://hrivera99.blogspot.com

  • Trex can't be updated to higher levels on windows 2003 server 64 bit

    Hi gurus,
    We have a portal system (EP 7.0 SP18) and a Trex 7.0 server which are
    working on windows 2003 server 64 bit on the same server.
    After upgrading our portal system from sp15 to sp18, we can not see
    indexes on Index Administration screen. When we tried to create the
    indexes from the beginning, we faced the message "An index with the samename already exists."
    We thought that the level of the Trex server(25) is low which may cause
    this problem and decided to update the Trex server to level 46. We
    downloaded "TREX70_46-20001842.SAR TREX 7.0 REV 46" from
    service.sap.com and tried to update Trex server according to
    NW70_SPSTACK_GUIDE_SPS18.pdf.During the installation a warning
    message "You started an installation of sofware for platform
    i386, but SAPinst is running on platform AMD64" was given. When we
    continued the installation, an error message
    was shown in a message box."Running msiexec.exe failed with return code
    1603:Fatal error during installation. Commandline was
    msiexec.exe/norestart/L sapmmcx86u.log/i sapmmcx86u.msi/qn" I searched
    the sapmmcx86u.log and the error message says that this installation
    package is not for windows
    2003 server 64 bit.
    "This installation does not support 64 Bit Windows Operating systems.
    Please use the corresponding 64 Bit installation package.
    Action ended 8:26:08: LaunchConditions. Return value 3.
    Action ended 8:26:08: INSTALL. Return value 3.
    MSI (s) (10:84) [08:26:08:578]: Product: SAP MMC SnapIn -- Installation
    failed."
    We searched in OSS notes and found the note "Note 1021003 - TREX 7.00 -
    Update Windows 2003 64-Bit installed from DVD"
    .We did the things in the note but unfortunately nothing changed.
    We tried the install revision 45,44 etc but we got the same warning and
    error messages.
    Any suggestions?
    Edited by: Tolga Akinci on Apr 30, 2009 3:08 PM

    Hi Tolga,
    You face with this error, because of Trex installation package is trying to install native i386 redistributables (vcredist_x86.msi) during the process. In order to patch Trex system on x64 architecture, follow the instructions, below;
    1) Start sapinst, under your <TREX_PATCH> path
    2) Ignore AMD64 warning popup
    3) When popup appears on the "1603:Fatal error during installation." error, change temp folders on both environment variables, on my computer
    4) Download and execute "vcredist_x64.exe" then run installer
    5) After respective installation click on "Retry" button on error popup
    At the end of this operation, your Trex patch will be succeeded. Please do not forget to undo your temp directory settings, on your Trex host. I hope that it is clarify your question.
    Best regards,
    Orkun Gedik
    Senior SAP Development And Basis Consultant

  • Error in installation database in Windows 2003 server 64 bits

    Hi, I have a problem. I am trying to install a database Oracle Enterprise Edition 9.2.6 in a machine that has Windows 2003 Server 64 bits
    . On having finished the installation and begin the Database Configuration Assistant appears the error ora-12546 TNS permission denied. In the file listener.log
    the following messages appear:
    TNS-12500: TNS:listener failed to start a dedicated server process
    TNS-12546: TNS:permission denied
    TNS-12560: TNS:protocol adapter error
    TNS-00516: Permission denied
    32-bit Windows Error: 5: Input/output error
    I see the note 722966 and my procesador is EM64T
    I install in local mode, not remote and using Administrator user.
    Help me, please!

    Hello,
    There is a note in SAP that indicates that EMT64/x64 is not compatible with Oracle 9.2 (nota 12546) There is Oracle's FAQ that indicates Oracle's versions and Windows that he(she) supports EMT64.
    http://www.oracle.com/technology/tech/windows/faq.html#x86-64
    Since you can see it(he,she) indicates that Oracle 9.2 is supported in Windows 32 bits with technology EMT64
    And that alone the version 10g 2 be reread it(he,she) is compatible with Windows 2003 SEVER 64 bits with technology EMT64
    I hope that this costs(suits) us to solve our problems
    A greeting

  • Installation of SAP NetWeaver on Windows 2003 Server ( 32 Bit )

    Hello Gurus,
    I am planning installation of SAP Net Weaver - SR2 on Windows Server 2003 ( 32 Bit ) and oracle 10g is my database.
    can anybody guide me from where I can install the software coz in the market place SAP N/W-SR3 is available.
    Is SAP N/W - SR3 is recommeded for Windows 2003 Server ( 32 Bit ).
    Can any body guide me the process & my qurey.
    Thanks & Regards
    Shishir

    Read SAp note Note 1108852 - SAP NetWeaver 7.0 / Business Suite 2005 SR3: Windows
    it says:
    21/MAY/08
    SAP system installation only supported on 64-bit operating systems, except for  dialog instances
    As of SAP NetWeaver 7.0 SR3 and Business Suite 2005 SR3, SAP only supports to install dialog instances on 32-bit operating systems. All remaining SAP system instances (central instance, database instance, central services instance (SCS), ABAP central services instance (ASCS)) must be installed on 64-bit operating systems. Therefore the folder "SAP Systems" is not available on the "Welcome screen", when you start the installation from a installation master DVD for 32-bit.
    You might need to install dialog instances on 32-bit if you want to use 32-bit SAP NetWeaver components, such as Adobe document services. We recommend, however, to first check whether these 32-bit components can run on 64-bit operating systems. If so, we recommend to also use 64-bit systems for these components, including the dialog instance.
    If you want to install a non-productive SAP NetWeaver 7.0 SR3 based system (test systems or development are normally productive systems)  on 32-bit, proceed as follows:
          1. Install a SAP NetWeaver 7.0 SR2 (SAP ERP 2005 SR2, SAP CRM 5.0 SR2 SAP SCM 5.0 SR2, SAP SRM 5.0 SR2) system.
          2. Patch this system to SAP NetWeaver 7.0 SR3 (SAP ERP 6.0, SAP CRM 5.0 SR3, SAP SCM 5.0 SR3, SAP SRM 5.0 SR3).

  • HT1766 I've just purchased an Iphone 5c. I have chosen the restore from iCloud and the phone has now restarted to complete the restore. It has been 3 hours and the progress bar has not moved.

    I have chosen the restore from iCloud and the phone has now restarted to complete the restore. It has been 3 hours and the progress bar has not moved. I have now tried to reload again by holding the sleep etc, to no avail

    If all you want is your old photos, you could backup your new phone using iTunes, then restore it from your iCloud backup, import the old photos to your computer, then restore it from the backup your made in iTunes returning your newer data to your phone.  If you want your old photos on your phone, sync them there from your computer using iTunes.  The process would look like this:
    Connect your phone to your computer, when it appears in iTunes on the left sidebar right-click on it and select Transfer Purchases; right-click again and select Backup.
    Disconnect from your computer and go to Settings>General>Reset>Erase All Content and Settings to return it to new
    Go through the activation setup, choosing to Restore from iCloud backup.  Make sure your phone is plugged into a charger and has access to wi-fi as this can take hours to complete.
    When complete, without connecting your phone to your computer, open iTunes and go to Preferences.  On the Devices tab check "Prevent...from syncing automatically"
    Now import the old photos to your computer (see http://support.apple.com/kb/HT4083)
    When done, open iTunes, right-click on the name of your phone on the left sidebar and select Restore from Backup, choose the backup you made in step 1.
    Go to the Photos tab and select the photos you want to sync to your phone and sync.

  • Oracle 10g install on Windows 2003 Server 32-bit

    As far as I can tell there doesn't appear to be an Oracle10g download for 10.2.0.4 for Windows 2003 Server. It looks like you have to download 10.2.0.1 for Windows then apply the patch to bring it up to 10.2.0.4. Am I seeing this correctly or am I missing something?
    Thanks!

    >
    As far as I can tell there doesn't appear to be an Oracle10g download for
    10.2.0.4 for Windows 2003 Server. It looks like you have to download 10.2.0.1
    for Windows then apply the patch to bring it up to 10.2.0.4.
    Am I seeing this correctly or am I missing something?
    >
    Indeed you are; your eyes are definitely not lying to you. 10.2.0.4 is a patchset which can only be applied to an already existing Oracle Home.
    You might want to try and understand a little bit more about what the 10.2.0.4 means by accessing the links below.
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/intro.htm#sthref14
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/dba.htm#sthref94
    http://wiki.oracle.com/page/Patchset+Number+Overview
    Perhaps you also ought to go through this {message:id=3251402}
    Regards,
    Phiri

  • EP 6.0 on Oracle 9i 32 bit for Windows 2003 server x86_64 bit env Install

    We are facing issues while performing instalations of EPortal 6.0 on Windows 2003 enterprise edition server(X64 version) on AMD 64 bit processor.We have installed 32 bit Oracle software alongwith 32 bit SAP kernel 640 dumps
    We had to install oracle 9.2.0.5 32 bit ,since there is no oracle
    realease for oracle 9i 64 bit ,on OS windows 2003 server X_86 64 bit,after doing this when we go ahead kenel 32 bit, we faced error during database creation phase of the NW java installation.The error logs are
    as follows,
    ERROR 2008-04-05 23:09:27
    CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message:
    ORA-12546: TNS:permission denied
    plz respond asap

    hi sm,
    this seems to be an issue with the rights of the user and the DB install. check is the TNS is up and running and that the SIDADM has fill access to it. Also , have you checked the latest PAM. why are you trying to implement EP6 right now? I would suggest to go for EP7.0
    regards,
    Shantanu

  • Download 10g for Windows 2003 server 32 bit does not provide the correct pr

    The following Oracle OTN link provides a misleading product. It says that the following link provides the Oracle 9i Database Release 2 Enterprise/Standard/Personal/Client Edition for Windows Server 2003 (32bit) and
    what it contains is the OUI for applying the 9.2.0.3 patchset and the patchset itself. It does not contains the product.
    http://www.oracle.com/technology/software/htdocs/devlic.html?http://otn.oracle.c
    om/software/products/oracle9i/htdocs/win2k3soft.html

    >
    As far as I can tell there doesn't appear to be an Oracle10g download for
    10.2.0.4 for Windows 2003 Server. It looks like you have to download 10.2.0.1
    for Windows then apply the patch to bring it up to 10.2.0.4.
    Am I seeing this correctly or am I missing something?
    >
    Indeed you are; your eyes are definitely not lying to you. 10.2.0.4 is a patchset which can only be applied to an already existing Oracle Home.
    You might want to try and understand a little bit more about what the 10.2.0.4 means by accessing the links below.
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/intro.htm#sthref14
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/dba.htm#sthref94
    http://wiki.oracle.com/page/Patchset+Number+Overview
    Perhaps you also ought to go through this {message:id=3251402}
    Regards,
    Phiri

  • XMII installation on Windows 2003 Server ( 64- Bit)

    Hello,
    Can we install xMII 11.5 SR01 on Win 2003 server ( 64 -Bit ) ??? When i am trying to download xMII software from SAP market place , under xMII downloads
    -> i can see only win32 link.
    Thanks
    Sharat

    Sharat,
    Did you try installation? I think that hasn't problem. The Windows 2003 Server has the full compabillity with x86 (32 bits) softwares.
    Post here your issues, I will try to help you. I'm very interested in this results.
    Regards,
    Vinicius Martins
    Neoris/Konitech
    Brasil

  • My phone won't update it keeps saying its not connected to the Internet and it is. And now my apps won't work?? Help

    MY phone needs updating and it won't let me. It keeps saying its not connected to the Internet and i

    Temporarily disable any security software on the computer.

  • HP Officejet Pro 8610 will not install on Windows 2003 Server 32 bit.

    When installing the 8610 with the disk, at the end it states and error occurred during the installation of the device.  The specified module could not be found.
    When I install using the downloaded drivers,  after the files extract and the program connects to the printer, when I hit Continue a screen pops up and states  the operating system of this computer is not supported...   even though the 2003 Windows server is on the list.   Is there anything I can do to install the drivers?  All I need is basic printing .   I'm about ready to pack it up and return it... which means the other printers will have to be returned because I like them all to be the same.
    Please help.

    Hi,
    Follow the steps below to install the software using an MSIEXEC command, the installation should not be done using the installer as any clieant operating system.
    The steps below are also applicable for installing the 8610 on a server OS:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03351547&lc=en&product=5367608&tmp...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • BO XI R2 works better on windows 2003 server 32 bit or windows 2003 server 64 bit

    Post Author: abdulachukatla
    CA Forum: Authentication
    I need one small clarification regarding Business Objects Enterprise Edition,  kindly request you to provide the information on, whether  BO XI E will work better  on windows 2003 32bit server or windows 2003 64bit server.
    Thanks in Advance
    Abdul

    Hello...aahh..MickyMouse
    could you please provide some more details. I never saw that you have to login during the installation to anything !
    Or are you trying to install a ServicePack for Rel.2 ?
    Regards
    -Seb.

Maybe you are looking for